Releases: Aircoookie/WLED
WLED release 0.13.2
Welcome to WLED 0.13.2 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
「かたわれ時だ」 - "It's magic hour" (Your Name)
This version's highlights are (in addition to the ones from 0.13.1)
- Various small improvements and bugfixes
See the changelog for a complete list of changes!
Update Notice
The new default ESP32 partition layout (1MB FS) is incompatible with the filesystem partition of the previous layout (1.5MB FS).
Please note that config and presets will be wiped upon updating an ESP32 from 0.13.0-b4 or earlier to 0.13.2 via USB or the web installer.
ESP32 OTA updates and all ESP8266 update methods are unaffected , your data will be kept when doing a wireless update.
Why doesn't Blynk work?
New signups for the legacy Blynk app are closed and not a lot of you are using it.
My benchmarks have shown that on the Ethernet build for ESP32, with huge LED counts, the framerate is improved when it is not compiled in.
If you need it, don't worry, as you can still compile it in!
WLED release 0.13.1
Welcome to WLED 0.13.1 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
「かたわれ時だ」 - "It's magic hour" (Your Name)
This version's highlights are (in addition to the ones from 0.13.0-b7)
- Hiding of UI color controls if they are unsupported by your light capabilities
- Utility to easily set your location for use of the sunrise/-set macros
See the changelog for a complete list of changes!
Update Notice
The new default ESP32 partition layout (1MB FS) is incompatible with the filesystem partition of the previous layout (1.5MB FS).
Please note that config and presets will be wiped upon updating an ESP32 from 0.13.0-b4 or earlier to 0.13.1 via USB or the web installer.
ESP32 OTA updates and all ESP8266 update methods are unaffected , your data will be kept when doing a wireless update.
Why doesn't Blynk work?
New signups for the legacy Blynk app are closed and not a lot of you are using it.
My benchmarks have shown that on the Ethernet build for ESP32, with huge LED counts, the framerate is improved when it is not compiled in.
If you need it, don't worry, as you can still compile it in!
WLED release 0.13.0 (use 0.13.1 instead)
Please use release 0.13.1, this version has a critical bug leaving you unable to create new presets!
Welcome to WLED 0.13.0 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
「かたわれ時だ」 - "It's magic hour" (Your Name)
This version's highlights are (in addition to the ones from 0.13.0-b7)
- Hiding of UI color controls if they are unsupported by your light capabilities
- Utility to easily set your location for use of the sunrise/-set macros
See the changelog for a complete list of changes!
Update Notice
The new default ESP32 partition layout (1MB FS) is incompatible with the filesystem partition of the previous layout (1.5MB FS).
Please note that config and presets will be wiped upon updating an ESP32 from 0.13.0-b4 or earlier to 0.13.0 via USB or the web installer.
ESP32 OTA updates and all ESP8266 update methods are unaffected , your data will be kept when doing a wireless update.
Why doesn't Blynk work?
New signups for the legacy Blynk app are closed and not a lot of you are using it.
My benchmarks have shown that on the Ethernet build for ESP32, with huge LED counts, the framerate is improved when it is not compiled in.
If you need it, don't worry, as you can still compile it in!
WLED beta release 0.13.0-b7
Welcome to WLED 0.13.0-b7 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
This version's highlights are (in addition to the ones from 0.13.0-b6)
- Full segment UDP sync (options, bounds, or both)
- Segment light capability API
- A plethora of bugfixes and improvements
Update Notice
The new default ESP32 partition layout (1MB FS) is incompatible with the filesystem partition of the previous layout (1.5MB FS).
Please note that config and presets will be wiped upon updating an ESP32 from 0.13.0-b4 or earlier to 0.13.0-b6 via USB or the web installer.
ESP32 OTA updates and all ESP8266 update methods are unaffected , your data will be kept when doing a wireless update.
Why doesn't Blynk work?
New signups for the legacy Blynk app are closed and not a lot of you are using it.
My benchmarks have shown that on ESP32 with huge LED counts, the framerate is improved when it is not compiled in.
If you use it, don't worry, as you can still compile it in!
Why does my OTA update fail?
With WLED 0.13.0-b5, we have moved to a new flash layout with 1.5MB space for the program instead of 1MB.
For the first time, in this release the program size for the ESP32 Ethernet build exceeds the available space on the old layout.
I provide a different binary small enough for OTA updating using the old layout, however this is missing the following features:
ESP32-ETH: Blynk, Cronixie, Hue sync
Please consider switching to the new layout to use these features and to ensure you can OTA update to future releases.
The process is as follows:
- Update to
WLED_0.13.0-b7_ESP32_Ethernet_OTA.bin
- Go to Security & Updates settings and backup your Configuration and Presets files
- Use https://install.wled.me to install the full binary.
NOTE that this will erase all data if the previous version is older than 0.13.0-b5 OR is still using the old 1.5MB layout. - Connect your board to WiFi, restore your Configuration and Presets in Security & Updates settings and reboot.
See the changelog for a complete list of changes!
WLED beta release 0.13.0-b6
Welcome to WLED 0.13.0-b6 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
This version's highlights are (in addition to the ones from 0.13.0-b5)
- PWM CCT hardware support and white balance correction
- Performance/stability improvements (single JSON buffer)
- Two new fairy effects
- Many small bugfixes
Update Notice
The new default ESP32 partition layout (1MB FS) is incompatible with the filesystem partition of the previous layout (1.5MB FS).
Please note that config and presets will be wiped upon updating an ESP32 from 0.13.0-b4 or earlier to 0.13.0-b6 via USB or the web installer.
ESP32 OTA updates and all ESP8266 update methods are unaffected , your data will be kept when doing a wireless update.
See the changelog for a complete list of changes!
WLED beta release 0.13.0-b5
Welcome to WLED 0.13.0-b5 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
This version's highlights are (in addition to the ones from 0.13.0-b4)
- Improv support for easy AP-less WiFi setup with the web installer
- JSON in/decrementing support for brightness and presets
- Changed default ESP32 partition layout to 4M, 1M FS
- Two new time zones
- Many other fixes and improvements
Update Notice
The new default ESP32 partition layout (1MB FS) is incompatible with the filesystem partition of the previous layout (1.5MB FS).
Please note that config and presets will be wiped upon updating an ESP32 to 0.13.0-b5 via USB or the web installer.
ESP32 OTA updates and all ESP8266 update methods are unaffected , your data will be kept when doing a wireless update.
See the changelog for a complete list of changes!
WLED beta version 0.13.0-b4
Welcome to WLED 0.13.0-b4 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
This version's highlights are (in addition to the ones from 0.13.0-b3)
- Virtual network busses: Stream effects from one unit to others over DDP!
- Bus config start field improvements
- Added option for bus refresh if off
- New auto segment logic
- Fixed current calculations for virtual or non-linear configs
- Other fixes and improvements
Thank you to @blazoncek for adding a lot of these features!
See the changelog for a complete list of changes!
WLED beta version 0.13.0-b3
Welcome to WLED 0.13.0-b3 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
This version's highlights are (in addition to the ones from 0.13.0-b2)
- Segment names:
Never forget which segment controls what again! - Sync groups:
Easily set up to 8 different groups to sync effects, rather than fiddling with ports - Increased maximum segments to 16 (ESP8266) / 32 (ESP32) (experimental, please test) and segment data limit
- Improved various effects
- Added 15 new palettes from the sound reactive fork
- Added custom CSS skinning and custom holiday background feature
- Fixed several issues related to transitions
- A heap of other fixes and improvements
Thank you to @blazoncek for adding a lot of these features!
See the changelog for a complete list of changes!
WLED beta version 0.13.0-b2
Welcome to WLED 0.13.0-b2 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
This version's highlights are (in addition to the ones from 0.13.0-b0)
- Websockets in UI:
If you use the same WLED light together simultaneously, you will instantly see each other's changes! - Various fixes and improvements
See the changelog for a complete list of changes!
WLED beta version 0.13.0-b0
Welcome to WLED 0.13.0-b0 "Toki"!
Time is the most valuable thing in the world. So let's use it right!
This version's highlights are
- Playlist editor in the web UI
- Location based sunset/sunrise timers
- Added support for custom usermode settings
- Multi button and switch support
- New segment offset setting
- Added
/json/cfg
to allow changing settings - Logo readability improved
- More accurate NTP syncronization
- Various fixes and improvements
Thank you to @blazoncek for adding a lot of these features!
See the changelog for a complete list of changes!