Docker companion on separate host - no notifications after klipper host boot

[pwlgrzs]

Hello,

I am running mobileraker_companion in docker on a separate host. Klipper host is a separate machine that I turn off during night time. I noticed that I will receive no notifications from companion until I restart the container, however in the logs I can see it's picking up the printer once klipper host is started.

Here's the last log from the container, as expected there's a good number of failed to connect errors ending with the companion reaching out to klipper host once I powered it on. I've done several prints since then and got 0 notifications. Then I restarted container and as visible in the logs I am getting notifications again.

mobileraker_logs.txt

[Clon1998]

Hey,
Sorry for my late reply.

At the very bottom of the log, I can see that notifications are issued.
If I understood your description correctly, after the logged notifcations, you started several other prints, and the container/companion did not issue any additional notifications until you restarted it?

[Johnnytk36]

Just letting you know, I am having the same issue. I have had to restart the docker container for mobileraker on my Synology NAS after restarting my sonic pad, or i don't get the push notifications.

[Clon1998]

Apr 8, 2024

Ill try to debug the container in my machine later this week.
Can you confirm that it is working fine for one print, but as soon as you start another the container requires a restart?

[Clon1998]

@Johnnytk36

Apr 8, 2024

Ill try to debug the container in my machine later this week. Can you confirm that it is working fine for one print, but as soon as you start another the container requires a restart?

[Johnnytk36]

@Clon1998 I'll try and do some testing with this for you. I haven't noticed that. Off the top of my head, as soon as i restart the sonic pad, mobileraker doesn't send any push notifications, till i restart the container.