gopro hero7

[patricerosay]

Hello,
I'm trying to use the script with a goprohero7:

"info": {
    "model_number": 30,
    "model_name": "HERO7 Black",
    "firmware_version": "HD7.01.01.70.00",
    "serial_number": "",
    "board_type": "0x05",
    "ap_mac": "",
    "ap_ssid": "",
    "ap_has_default_credentials": "0",
    "git_sha1": "b29c80591af6b628f0debffdccd8def70e8a696b",
    "capabilities": "16",
    "lens_count": "1",
    "update_required": "0"
  }

I've changed in the script the ip adress of my laptop wich is 10.5.5.101 instead of 10.5.5.100
When I run the sudo python3 GoProStream.py, it runs ok:

sudo python3 GoProStream.py 
branch HD4
HERO7 Black
HD7.01.01.70.00
UDP target IP: 10.5.5.9
UDP target port: 8554
message: _GPHD_:0:0:2:0.000000

Recording on camera: False
Press ctrl+C to quit this application.

But nothing comes out from nethier ffplay nor vlc
traces in wireshark are showing a lot of udp traffic

I've compared the results of your gpControl-HERO7Black.json with one i've generated.
Put appart the
"version": 3.0,
There are very few differences,

Do you have an idea of why I can't make this work ?
Thanks a lot

[vjustov]

in my case i always have to start recording a video and stop right away for ffplay to "wake up". i havent been able to get it to work with vlc.

[smithlevenson]

I am having the same issue. Tried starting and stopping a recording on the gopro, but that didn't get ffplay to start. Any other ideas?