This is the sixth part of the Kernel booting process
series. In the previous part we took a look at the final stages of the Linux kernel boot process. But we have skipped some important, more advanced parts.
As you may remember, the entry point of the Linux kernel is the start_kernel
function defined in the main.c source code file. This function is executed at the address stored in LOAD_PHYSICAL_ADDR
. and depends on the CONFIG_PHYSICAL_START
kernel configuration option, which is 0x1000000
by default:
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
default "0x1000000"
---help---
This gives the physical address where the kernel is loaded.
...
...
...
This value may be changed during kernel configuration, but the load address can also be configured to be a random value. For this purpose, the CONFIG_RANDOMIZE_BASE
kernel configuration option should be enabled during kernel configuration.
Now, the physical address where the Linux kernel image will be decompressed and loaded will be randomized. This part considers the case when the CONFIG_RANDOMIZE_BASE
option is enabled and the load address of the kernel image is randomized for security reasons.
Before the kernel decompressor can look for a random memory range to decompress and load the kernel to, the identity mapped page tables should be initialized. If the bootloader used the 16-bit or 32-bit boot protocol, we already have page tables. But, there may be problems if the kernel decompressor selects a memory range which is valid only in a 64-bit context. That's why we need to build new identity mapped page tables.
Indeed, the first step in randomizing the kernel load address is to build new identity mapped page tables. But first, let's reflect on how we got to this point.
In the previous part, we followed the transition to long mode and jumped to the kernel decompressor entry point - the extract_kernel
function. The randomization stuff begins with a call to this function:
void choose_random_location(unsigned long input,
unsigned long input_size,
unsigned long *output,
unsigned long output_size,
unsigned long *virt_addr)
{}
This function takes five parameters:
input
;input_size
;output
;output_isze
;virt_addr
.
Let's try to understand what these parameters are. The first parameter, input
is just the input_data
parameter of the extract_kernel
function from the arch/x86/boot/compressed/misc.c source code file, cast to unsigned long
:
asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
unsigned char *input_data,
unsigned long input_len,
unsigned char *output,
unsigned long output_len)
{
...
...
...
choose_random_location((unsigned long)input_data, input_len,
(unsigned long *)&output,
max(output_len, kernel_total_size),
&virt_addr);
...
...
...
}
This parameter is passed through assembly from the arch/x86/boot/compressed/head_64.S source code file:
leaq input_data(%rip), %rdx
input_data
is generated by the little mkpiggy program. If you've tried compiling the Linux kernel yourself, you may find the output generated by this program in the linux/arch/x86/boot/compressed/piggy.S
source code file. In my case this file looks like this:
.section ".rodata..compressed","a",@progbits
.globl z_input_len
z_input_len = 6988196
.globl z_output_len
z_output_len = 29207032
.globl input_data, input_data_end
input_data:
.incbin "arch/x86/boot/compressed/vmlinux.bin.gz"
input_data_end:
As you can see, it contains four global symbols. The first two, z_input_len
and z_output_len
are the sizes of the compressed and uncompressed vmlinux.bin.gz
archive. The third is our input_data
parameter which points to the linux kernel image's raw binary (stripped of all debugging symbols, comments and relocation information). The last parameter, input_data_end
, points to the end of the compressed linux image.
So, the first parameter to the choose_random_location
function is the pointer to the compressed kernel image that is embedded into the piggy.o
object file.
The second parameter of the choose_random_location
function is z_input_len
.
The third and fourth parameters of the choose_random_location
function are the address of the decompressed kernel image and its length respectively. The decompressed kernel's address came from the arch/x86/boot/compressed/head_64.S source code file and is the address of the startup_32
function aligned to a 2 megabyte boundary. The size of the decompressed kernel is given by z_output_len
which, again, is found in piggy.S
.
The last parameter of the choose_random_location
function is the virtual address of the kernel load address. As can be seen, by default, it coincides with the default physical load address:
unsigned long virt_addr = LOAD_PHYSICAL_ADDR;
The physical load address is defined by the configuration options:
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
+ (CONFIG_PHYSICAL_ALIGN - 1)) \
& ~(CONFIG_PHYSICAL_ALIGN - 1))
We've covered choose_random_location
's parameters, so let's look at its implementation. This function starts by checking the nokaslr
option in the kernel command line:
if (cmdline_find_option_bool("nokaslr")) {
warn("KASLR disabled: 'nokaslr' on cmdline.");
return;
}
We exit choose_random_location
if the option is specified, leaving the kernel load address unrandomized. Information related to this can be found in the kernel's documentation:
kaslr/nokaslr [X86]
Enable/disable kernel and module base offset ASLR
(Address Space Layout Randomization) if built into
the kernel. When CONFIG_HIBERNATION is selected,
kASLR is disabled by default. When kASLR is enabled,
hibernation will be disabled.
Let's assume that we didn't pass nokaslr
to the kernel command line and the CONFIG_RANDOMIZE_BASE
kernel configuration option is enabled. In this case we add kASLR
flag to kernel load flags:
boot_params->hdr.loadflags |= KASLR_FLAG;
Now, we call another function:
initialize_identity_maps();
The initialize_identity_maps
function is defined in the arch/x86/boot/compressed/kaslr_64.c source code file. This function starts by initialising an instance of the x86_mapping_info
structure called mapping_info
:
mapping_info.alloc_pgt_page = alloc_pgt_page;
mapping_info.context = &pgt_data;
mapping_info.page_flag = __PAGE_KERNEL_LARGE_EXEC | sev_me_mask;
mapping_info.kernpg_flag = _KERNPG_TABLE;
The x86_mapping_info
structure is defined in the arch/x86/include/asm/init.h header file and looks like this:
struct x86_mapping_info {
void *(*alloc_pgt_page)(void *);
void *context;
unsigned long page_flag;
unsigned long offset;
bool direct_gbpages;
unsigned long kernpg_flag;
};
This structure provides information about memory mappings. As you may remember from the previous part, we have already set up page tables to cover the range 0
to 4G
. This won't do since we might generate a randomized address outside of the 4 gigabyte range. So, the initialize_identity_maps
function initializes the memory for a new page table entry. First, let's take a look at the definition of the x86_mapping_info
structure.
alloc_pgt_page
is a callback function that is called to allocate space for a page table entry. The context
field is an instance of the alloc_pgt_data
structure. We use it to track allocated page tables. The page_flag
and kernpg_flag
fields are page flags. The first represents flags for PMD
or PUD
entries. The kernpg_flag
field represents overridable flags for kernel pages. The direct_gbpages
field is used to check if huge pages are supported and the last field, offset
, represents the offset between the kernel's virtual addresses and its physical addresses up to the PMD
level.
The alloc_pgt_page
callback just checks that there is space for a new page, allocates it in the pgt_buf
field of the alloc_pgt_data
structure and returns the address of the new page:
entry = pages->pgt_buf + pages->pgt_buf_offset;
pages->pgt_buf_offset += PAGE_SIZE;
Here's what the alloc_pgt_data
structure looks like:
struct alloc_pgt_data {
unsigned char *pgt_buf;
unsigned long pgt_buf_size;
unsigned long pgt_buf_offset;
};
The last goal of the initialize_identity_maps
function is to initialize pgdt_buf_size
and pgt_buf_offset
. As we are only in the initialization phase, the initialze_identity_maps
function sets pgt_buf_offset
to zero:
pgt_data.pgt_buf_offset = 0;
pgt_data.pgt_buf_size
will be set to 77824
or 69632
depending on which boot protocol was used by the bootloader (64-bit or 32-bit). The same is done for pgt_data.pgt_buf
. If a bootloader loaded the kernel at startup_32
, pgdt_data.pgdt_buf
will point to the end of the already initialzed page table in the arch/x86/boot/compressed/head_64.S source code file:
pgt_data.pgt_buf = _pgtable + BOOT_INIT_PGT_SIZE;
Here, _pgtable
points to the beginning of _pgtable. On the other hand, if the bootloader used the 64-bit boot protocol and loaded the kernel at startup_64
, the early page tables should already be built by the bootloader itself and _pgtable
will just point to those instead:
pgt_data.pgt_buf = _pgtable
As the buffer for new page tables is initialized, we may return to the choose_random_location
function.
After the stuff related to identity page tables is initilized, we can choose a random memory location to extract the kernel image to. But as you may have guessed, we can't just choose any address. There are certain reseved memory regions which are occupied by important things like the initrd and the kernel command line which must be avoided. The mem_avoid_init
function will help us do this:
mem_avoid_init(input, input_size, *output);
All unsafe memory regions will be collected in an array called mem_avoid
:
struct mem_vector {
unsigned long long start;
unsigned long long size;
};
static struct mem_vector mem_avoid[MEM_AVOID_MAX];
Here, MEM_AVOID_MAX
is from the mem_avoid_index
enum which represents different types of reserved memory regions:
enum mem_avoid_index {
MEM_AVOID_ZO_RANGE = 0,
MEM_AVOID_INITRD,
MEM_AVOID_CMDLINE,
MEM_AVOID_BOOTPARAMS,
MEM_AVOID_MEMMAP_BEGIN,
MEM_AVOID_MEMMAP_END = MEM_AVOID_MEMMAP_BEGIN + MAX_MEMMAP_REGIONS - 1,
MEM_AVOID_MAX,
};
Both are defined in the arch/x86/boot/compressed/kaslr.c source code file.
Let's look at the implementation of the mem_avoid_init
function. The main goal of this function is to store information about reseved memory regions with descriptions given by the mem_avoid_index
enum in the mem_avoid
array and to create new pages for such regions in our new identity mapped buffer. The mem_avoid_index
function does the same thing for all elements in the mem_avoid_index
enum, so let's look at a typical example of the process:
mem_avoid[MEM_AVOID_ZO_RANGE].start = input;
mem_avoid[MEM_AVOID_ZO_RANGE].size = (output + init_size) - input;
add_identity_map(mem_avoid[MEM_AVOID_ZO_RANGE].start,
mem_avoid[MEM_AVOID_ZO_RANGE].size);
THe mem_avoid_init
function first tries to avoid memory regions currently used to decompress the kernel. We fill an entry from the mem_avoid
array with the start address and the size of the relevant region and call the add_identity_map
function, which builds the identity mapped pages for this region. The add_identity_map
function is defined in the arch/x86/boot/compressed/kaslr_64.c source code file and looks like this:
void add_identity_map(unsigned long start, unsigned long size)
{
unsigned long end = start + size;
start = round_down(start, PMD_SIZE);
end = round_up(end, PMD_SIZE);
if (start >= end)
return;
kernel_ident_mapping_init(&mapping_info, (pgd_t *)top_level_pgt,
start, end);
}
The round_up
and round_down
functions are used to align the start and end addresses to a 2 megabyte boundary.
In the end this function calls the kernel_ident_mapping_init
function from the arch/x86/mm/ident_map.c source code file and passes the previously initialized mapping_info
instance, the address of the top level page table and the start and end addresses of the memory region for which a new identity mapping should be built.
The kernel_ident_mapping_init
function sets default flags for new pages if they were not already set:
if (!info->kernpg_flag)
info->kernpg_flag = _KERNPG_TABLE;
It then starts to build new 2-megabyte (because of the PSE
bit in mapping_info.page_flag
) page entries (PGD -> P4D -> PUD -> PMD
if we're using five-level page tables or PGD -> PUD -> PMD
if four-level page tables are used) associated with the given addresses.
for (; addr < end; addr = next) {
p4d_t *p4d;
next = (addr & PGDIR_MASK) + PGDIR_SIZE;
if (next > end)
next = end;
p4d = (p4d_t *)info->alloc_pgt_page(info->context);
result = ident_p4d_init(info, p4d, addr, next);
return result;
}
The first thing this for loop does is to find the next entry of the Page Global Directory
for the given address. If the entry's address is greater than the end
of the given memory region, we set its size to end
. After this, we allocate a new page with the x86_mapping_info
callback that we looked at previously and call the ident_p4d_init
function. The ident_p4d_init
function will do the same thing, but for the lower level page directories (p4d
-> pud
-> pmd
).
That's all.
We now have new page entries related to reserved addresses in our page tables. We haven't reached the end of the mem_avoid_init
function, but the rest is similar. It builds pages for the initrd and the kernel command line, among other things.
Now we may return to the choose_random_location
function.
After the reserved memory regions have been stored in the mem_avoid
array and identity mapped pages are built for them, we select the region with the lowest available address to decompress the kernel to:
min_addr = min(*output, 512UL << 20);
You will notice that the address should be within the first 512
megabytes. A limit of 512
megabytes was selected to avoid unknown things in lower memory.
The next step is to select random physical and virtual addresses to load the kernel to. The first is the physical addresses:
random_addr = find_random_phys_addr(min_addr, output_size);
The find_random_phys_addr
function is defined in the same source code file as choose_random_location
:
static unsigned long find_random_phys_addr(unsigned long minimum,
unsigned long image_size)
{
minimum = ALIGN(minimum, CONFIG_PHYSICAL_ALIGN);
if (process_efi_entries(minimum, image_size))
return slots_fetch_random();
process_e820_entries(minimum, image_size);
return slots_fetch_random();
}
The main goal of the process_efi_entries
function is to find all suitable memory ranges in fully accessible memory to load kernel. If the kernel is compiled and run on a system without EFI support, we continue to search for such memory regions in the e820 region. All memory regions found will be stored in the slot_areas
array:
struct slot_area {
unsigned long addr;
int num;
};
#define MAX_SLOT_AREA 100
static struct slot_area slot_areas[MAX_SLOT_AREA];
The kernel will select a random index from this array to decompress the kernel to. The selection process is conducted by the slots_fetch_random
function. The main goal of the slots_fetch_random
function is to select a random memory range from the slot_areas
array via the kaslr_get_random_long
function:
slot = kaslr_get_random_long("Physical") % slot_max;
The kaslr_get_random_long
function is defined in the arch/x86/lib/kaslr.c source code file and as its name suggests, returns a random number. Note that the random number can be generated in a number of ways depending on kernel configuration and features present in the system (For example, using the time stamp counter, or rdrand or some other method).
We now have a random physical address to decompress the kernel to.
After selecting a random physical address for the decompressed kernel, we generate identity mapped pages for the region:
random_addr = find_random_phys_addr(min_addr, output_size);
if (*output != random_addr) {
add_identity_map(random_addr, output_size);
*output = random_addr;
}
From now on, output
will store the base address of the memory region where kernel will be decompressed. Currrently, we have only randomized the physical address. We can randomize the virtual address as well on the x86_64 architecture:
if (IS_ENABLED(CONFIG_X86_64))
random_addr = find_random_virt_addr(LOAD_PHYSICAL_ADDR, output_size);
*virt_addr = random_addr;
In architectures other than x86_64
, the randomized physical and virtual addresses are the same. The find_random_virt_addr
function calculates the number of virtual memory ranges needed to hold the kernel image. It calls the kaslr_get_random_long
function, which we have already seen being used to generate a random physical
address.
At this point we have randomized both the base physical (*output
) and virtual (*virt_addr
) addresses for the decompressed kernel.
That's all.
This is the end of the sixth and last part concerning the linux kernel's booting process. We will not see any more posts about kernel booting (though there may be updates to this and previous posts). We will now turn to other parts of the linux kernel instead.
The next chapter will be about kernel initialization and we will study the first steps take in the Linux kernel initialization code.
If you have any questions or suggestions write me a comment or ping me in twitter.
Please note that English is not my first language, And I am really sorry for any inconvenience. If you find any mistakes please send me PR to linux-insides.