Asterisk configuration

Enable and configure embedded asterisk web server.

1.Open /etc/asterisk/http.conf

• Make sure you have following options congifured

  [general]
  enabled=yes
  ; Address to bind to, both for HTTP and HTTPS. You MUST specify
  ; a bindaddr in order for the HTTP server to run. There is no
  ; default value.
  bindaddr=<YOUR IP ADDRESS or 0.0.0.0>
  bindport=8088
  tlsenable=yes          ; enable tls - default no.
  tlsbindaddr=<YOUR IP ADDRESS>:8089    ; address and port to bind to - default is bindaddr and port 8089.
  tlscertfile=/path/to/your/certificate.pem  ; path to the certificate file (*.pem) only.
  tlsprivatekey=/path/to/your/privkey.pem    ; path to private key file (*.pem) only.

Configure chan_sip

1.Open /etc/asterisk/sip.conf

• Add followinf lines

```` ini
realm=<your domain name>
transport=udp,ws,wss
avpf=yes
srvlookup=yes
````