Skip to content

Latest commit

 

History

History
27 lines (17 loc) · 1.01 KB

README.md

File metadata and controls

27 lines (17 loc) · 1.01 KB

TwizyChargeThrottle

This is a very simple tool to limit the Twizy charge current if you don't have an OVMS.

It can limit the charge current to a fixed level (defined in the config file) or use a coded rotary switch or simple DIP switch for dynamic level adjustment. It can signal the charging state and active throttling by LEDs.

See wiring scheme for an example using a coded rotary switch.

The Arduino needs to be connected to the Twizy CAN bus during the charge process to be able to actively overwrite the charge current control frames.

Note: using an interrupt capable CAN shield is highly recommended. No attempt at reducing the Arduino current consumption is made, include a power switch or fork and extend the code for sleep mode (and send me a pull request).

Info

Author: Michael Balzer [email protected]

Libraries used:

This is free software under GNU Lesser General Public License (LGPL) https://www.gnu.org/licenses/lgpl.html