How to run on Android Device #6

smacinto · 2020-07-06T07:46:49Z

Thanks David for such a great app.

I would like to run EnphaseCollector on an android device but am unsure if this is possible? Any tips would be much appreciated.

dlmcpaul · 2020-07-07T07:18:24Z

There is not likely to be much I can do to run this app on android. Obviously you can display the web page on an android device but you will need a machine with java or docker to run the application.

Android does not seem to have either. I did manage to install QEMU and try running java in a alpine image but not a lot of luck.

I would like to know more about your situation. Is it because you don't have a machine that is on all the time?

smacinto · 2020-07-07T08:51:06Z

David I was hoping to run your application on an old android galaxy tablet and have it displayed in the kitchen so that we could monitor usage and production every minute. I find MyEnlighten not granular enough for identifying devices consuming power. I do have a desktop and laptop but don't wish to run these devices 24*7.

dlmcpaul · 2020-07-07T14:28:31Z

Yes I understand. I have a Synology NAS drive that needs to be on 24*7 and it runs docker images so I host there.

dlmcpaul · 2020-10-17T04:08:12Z

I recently added a ARM docker image for use with raspberry pi devices

smacinto · 2021-07-17T07:21:16Z

Thanks David. This works a treat on my raspberry and I am able to view the graphs on my old galaxy tablet as hoped.

smacinto · 2022-07-05T05:38:23Z

Hi David. Do you have an updated ARM docker image for a raspberry pi? I have tried running the latest 0.25 version with the docker platform option without success.

dlmcpaul · 2022-07-05T06:23:26Z

I have pushed the 0.25 release to the dlmcpaul/enphasecollector-arm image

Let me know how it goes as I cannot test arm images.

smacinto · 2022-07-05T07:26:25Z

Hi David,

It would appear the enphasecollector-arm image successfully downloaded but I tried running with and without the docker
platform option without success.

Any ideas?

Thanks for your great app and prompt response.

Regards Stuart.

pi@raspberrypi:~ $ docker images
REPOSITORY                  TAG       IMAGE ID       CREATED         SIZE
dlmcpaul/enphasecollector   latest    6c2428160f71   9 days ago      281MB
dlmcpaul/enphasecollector   arm       deaaca08f0b0   22 months ago   467MB
hello-world                 latest    851163c78e4a   2 years ago     4.85kB
pi@raspberrypi:~ $ 
pi@raspberrypi:~ $ docker pull dlmcpaul/enphasecollector-arm
Using default tag: latest
latest: Pulling from dlmcpaul/enphasecollector-arm
11e23ac719b3: Pull complete 
68e4a04805fb: Pull complete 
e41ee0d8f3dc: Pull complete 
bdd3adec87ea: Pull complete 
93f308e998d2: Pull complete 
3911327e6f99: Pull complete 
2d21732c3c14: Pull complete 
Digest: sha256:18e96f93baac2608d63caca0c9f50ee5648e97ce0feb357422fa9a165f1568e8
Status: Downloaded newer image for dlmcpaul/enphasecollector-arm:latest
docker.io/dlmcpaul/enphasecollector-arm:latest
pi@raspberrypi:~ $ 
pi@raspberrypi:~ $ docker images
REPOSITORY                      TAG       IMAGE ID       CREATED         SIZE
dlmcpaul/enphasecollector-arm   latest    4bab9bc9a27f   9 days ago      333MB
dlmcpaul/enphasecollector       latest    6c2428160f71   9 days ago      281MB
dlmcpaul/enphasecollector       arm       deaaca08f0b0   22 months ago   467MB
hello-world                     latest    851163c78e4a   2 years ago     4.85kB
pi@raspberrypi:~ $ 





pi@raspberrypi:~ $ docker run \
> --mount source=enphase,target=/internal_db \
> -e TZ=Australia/Sydney \
> -e ENVOY_CONTROLLER_PASSWORD=*** \
> -e ENVOY_CONTROLLER_HOST=*** \
> -e ENVOY_REFRESHSECONDS=15000 \
> -e ENVOY_PAYMENTPERKILOWATT=0.102 \
> -e ENVOY_CHARGEPERKILOWATT=0.288 \
> -e ENVOY_DAILYSUPPLYCHARGE=1.31 \
> -e ENVOY_BANDS[0].FROM=0700 \
> -e ENVOY_BANDS[0].TO=0859 \
> -e ENVOY_BANDS[0].COLOUR=#FA8072 \
> -e ENVOY_BANDS[1].FROM=1700 \
> -e ENVOY_BANDS[1].TO=1959 \
> -e ENVOY_BANDS[1].COLOUR=#FA8072 \
> -e ENVOY_BANDS[2].FROM=0900 \
> -e ENVOY_BANDS[2].TO=1659 \
> -e ENVOY_BANDS[2].COLOUR=#F0E68C \
> -e ENVOY_BANDS[3].FROM=2000 \
> -e ENVOY_BANDS[3].TO=2159 \
> -e ENVOY_BANDS[3].COLOUR=#F0E68C \
> -e ENVOY_BANDS[4].FROM=2200 \
> -e ENVOY_BANDS[4].TO=0659 \
> -e ENVOY_BANDS[4].COLOUR=#87CEEB \
> -p 8080:8080 \
> dlmcpaul/enphasecollector-arm:latest
WARNING: The requested image's platform (linux/arm64) does not match the detected host platform (linux/arm/v7) and no specific platform was requested
standard_init_linux.go:219: exec user process caused: exec format error


pi@raspberrypi:~ $ docker run \
> --mount source=enphase,target=/internal_db \
> -e TZ=Australia/Sydney \
> -e ENVOY_CONTROLLER_PASSWORD=*** \
> -e ENVOY_CONTROLLER_HOST=*** \
> -e ENVOY_REFRESHSECONDS=15000 \
> -e ENVOY_PAYMENTPERKILOWATT=0.102 \
> -e ENVOY_CHARGEPERKILOWATT=0.288 \
> -e ENVOY_DAILYSUPPLYCHARGE=1.31 \
> -e ENVOY_BANDS[0].FROM=0700 \
> -e ENVOY_BANDS[0].TO=0859 \
> -e ENVOY_BANDS[0].COLOUR=#FA8072 \
> -e ENVOY_BANDS[1].FROM=1700 \
> -e ENVOY_BANDS[1].TO=1959 \
> -e ENVOY_BANDS[1].COLOUR=#FA8072 \
> -e ENVOY_BANDS[2].FROM=0900 \
> -e ENVOY_BANDS[2].TO=1659 \
> -e ENVOY_BANDS[2].COLOUR=#F0E68C \
> -e ENVOY_BANDS[3].FROM=2000 \
> -e ENVOY_BANDS[3].TO=2159 \
> -e ENVOY_BANDS[3].COLOUR=#F0E68C \
> -e ENVOY_BANDS[4].FROM=2200 \
> -e ENVOY_BANDS[4].TO=0659 \
> -e ENVOY_BANDS[4].COLOUR=#87CEEB \
> -p 8080:8080 \
> --platform linux/amd64 dlmcpaul/enphasecollector-arm:latest 
Unable to find image 'dlmcpaul/enphasecollector-arm:latest' locally
latest: Pulling from dlmcpaul/enphasecollector-arm
Digest: sha256:18e96f93baac2608d63caca0c9f50ee5648e97ce0feb357422fa9a165f1568e8
Status: Image is up to date for dlmcpaul/enphasecollector-arm:latest
docker: Error response from daemon: image with reference dlmcpaul/enphasecollector-arm:latest was found but does not match the specified platform: wanted linux/amd64, actual: linux/arm64.
See 'docker run --help'.


pi@raspberrypi:~ $ docker run \
> --mount source=enphase,target=/internal_db \
> -e TZ=Australia/Sydney \
> -e ENVOY_CONTROLLER_PASSWORD=*** \
> -e ENVOY_CONTROLLER_HOST=*** \
> -e ENVOY_REFRESHSECONDS=15000 \
> -e ENVOY_PAYMENTPERKILOWATT=0.102 \
> -e ENVOY_CHARGEPERKILOWATT=0.288 \
> -e ENVOY_DAILYSUPPLYCHARGE=1.31 \
> -e ENVOY_BANDS[0].FROM=0700 \
> -e ENVOY_BANDS[0].TO=0859 \
> -e ENVOY_BANDS[0].COLOUR=#FA8072 \
> -e ENVOY_BANDS[1].FROM=1700 \
> -e ENVOY_BANDS[1].TO=1959 \
> -e ENVOY_BANDS[1].COLOUR=#FA8072 \
> -e ENVOY_BANDS[2].FROM=0900 \
> -e ENVOY_BANDS[2].TO=1659 \
> -e ENVOY_BANDS[2].COLOUR=#F0E68C \
> -e ENVOY_BANDS[3].FROM=2000 \
> -e ENVOY_BANDS[3].TO=2159 \
> -e ENVOY_BANDS[3].COLOUR=#F0E68C \
> -e ENVOY_BANDS[4].FROM=2200 \
> -e ENVOY_BANDS[4].TO=0659 \
> -e ENVOY_BANDS[4].COLOUR=#87CEEB \
> -p 8080:8080 \
> --platform linux/arm/v7 dlmcpaul/enphasecollector-arm:latest
Unable to find image 'dlmcpaul/enphasecollector-arm:latest' locally
latest: Pulling from dlmcpaul/enphasecollector-arm
Digest: sha256:18e96f93baac2608d63caca0c9f50ee5648e97ce0feb357422fa9a165f1568e8
Status: Image is up to date for dlmcpaul/enphasecollector-arm:latest
docker: Error response from daemon: image with reference dlmcpaul/enphasecollector-arm:latest was found but does not match the specified platform: wanted linux/arm/v7, actual: linux/arm64.
See 'docker run --help'.
pi@raspberrypi:~ $ 



pi@raspberrypi:~ $ docker run \
> --mount source=enphase,target=/internal_db \
> -e TZ=Australia/Sydney \
> -e ENVOY_CONTROLLER_PASSWORD=*** \
> -e ENVOY_CONTROLLER_HOST=*** \
> -e ENVOY_REFRESHSECONDS=15000 \
> -e ENVOY_PAYMENTPERKILOWATT=0.102 \
> -e ENVOY_CHARGEPERKILOWATT=0.288 \
> -e ENVOY_DAILYSUPPLYCHARGE=1.31 \
> -e ENVOY_BANDS[0].FROM=0700 \
> -e ENVOY_BANDS[0].TO=0859 \
> -e ENVOY_BANDS[0].COLOUR=#FA8072 \
> -e ENVOY_BANDS[1].FROM=1700 \
> -e ENVOY_BANDS[1].TO=1959 \
> -e ENVOY_BANDS[1].COLOUR=#FA8072 \
> -e ENVOY_BANDS[2].FROM=0900 \
> -e ENVOY_BANDS[2].TO=1659 \
> -e ENVOY_BANDS[2].COLOUR=#F0E68C \
> -e ENVOY_BANDS[3].FROM=2000 \
> -e ENVOY_BANDS[3].TO=2159 \
> -e ENVOY_BANDS[3].COLOUR=#F0E68C \
> -e ENVOY_BANDS[4].FROM=2200 \
> -e ENVOY_BANDS[4].TO=0659 \
> -e ENVOY_BANDS[4].COLOUR=#87CEEB \
> -p 8080:8080 \
> --platform linux/arm64 dlmcpaul/enphasecollector-arm:latest 
standard_init_linux.go:219: exec user process caused: exec format error


pi@raspberrypi:~ $ docker run \
> --mount source=enphase,target=/internal_db \
> -e TZ=Australia/Sydney \
> -e ENVOY_CONTROLLER_PASSWORD=*** \
> -e ENVOY_CONTROLLER_HOST=*** \
> -e ENVOY_REFRESHSECONDS=15000 \
> -e ENVOY_PAYMENTPERKILOWATT=0.102 \
> -e ENVOY_CHARGEPERKILOWATT=0.288 \
> -e ENVOY_DAILYSUPPLYCHARGE=1.31 \
> -e ENVOY_BANDS[0].FROM=0700 \
> -e ENVOY_BANDS[0].TO=0859 \
> -e ENVOY_BANDS[0].COLOUR=#FA8072 \
> -e ENVOY_BANDS[1].FROM=1700 \
> -e ENVOY_BANDS[1].TO=1959 \
> -e ENVOY_BANDS[1].COLOUR=#FA8072 \
> -e ENVOY_BANDS[2].FROM=0900 \
> -e ENVOY_BANDS[2].TO=1659 \
> -e ENVOY_BANDS[2].COLOUR=#F0E68C \
> -e ENVOY_BANDS[3].FROM=2000 \
> -e ENVOY_BANDS[3].TO=2159 \
> -e ENVOY_BANDS[3].COLOUR=#F0E68C \
> -e ENVOY_BANDS[4].FROM=2200 \
> -e ENVOY_BANDS[4].TO=0659 \
> -e ENVOY_BANDS[4].COLOUR=#87CEEB \
> -p 8080:8080 \
> --platform linux/amd64 dlmcpaul/enphasecollector-arm
Unable to find image 'dlmcpaul/enphasecollector-arm:latest' locally
latest: Pulling from dlmcpaul/enphasecollector-arm
Digest: sha256:18e96f93baac2608d63caca0c9f50ee5648e97ce0feb357422fa9a165f1568e8
Status: Image is up to date for dlmcpaul/enphasecollector-arm:latest
docker: Error response from daemon: image with reference dlmcpaul/enphasecollector-arm was found but does not match the specified platform: wanted linux/amd64, actual: linux/arm64.
See 'docker run --help'.

pi@raspberrypi:~ $ docker run -d --restart unless-stopped --mount source=enphase,target=/internal_db
> -e TZ=Australia/Sydney
> -e ENVOY_CONTROLLER_PASSWORD=***
> -e ENVOY_CONTROLLER_HOST=***
> -e ENVOY_REFRESHSECONDS=15000
> -e ENVOY_PAYMENTPERKILOWATT=0.102
> -e ENVOY_CHARGEPERKILOWATT=0.288
> -e ENVOY_DAILYSUPPLYCHARGE=1.31
> -e ENVOY_BANDS[0].FROM=0700
> -e ENVOY_BANDS[0].TO=0859
> -e ENVOY_BANDS[0].COLOUR=#FA8072
> -e ENVOY_BANDS[1].FROM=1700
> -e ENVOY_BANDS[1].TO=1959
> -e ENVOY_BANDS[1].COLOUR=#FA8072
> -e ENVOY_BANDS[2].FROM=0900
> -e ENVOY_BANDS[2].TO=1659
> -e ENVOY_BANDS[2].COLOUR=#F0E68C
> -e ENVOY_BANDS[3].FROM=2000
> -e ENVOY_BANDS[3].TO=2159
> -e ENVOY_BANDS[3].COLOUR=#F0E68C
> -e ENVOY_BANDS[4].FROM=2200
> -e ENVOY_BANDS[4].TO=0659
> -e ENVOY_BANDS[4].COLOUR=#87CEEB
> -p 8080:8080
> dlmcpaul/enphasecollector-arm:latest
WARNING: The requested image's platform (linux/arm64) does not match the detected host platform (linux/arm/v7) and no specific platform was requested
9e415c417c1f4af6db3fa2251375e4a8df9ffd8617a873a655a919c593ee7f11
pi@raspberrypi:~ $

pi@raspberrypi:~ $ docker container ls
CONTAINER ID   IMAGE                                  COMMAND                  CREATED         STATUS                         PORTS     NAMES
9e415c417c1f   dlmcpaul/enphasecollector-arm:latest   "java -Djava.securit\u2026"   2 minutes ago   Restarting (1) 4 seconds ago             serene_darwin

pi@raspberrypi:~ $ !-1
docker container ls
CONTAINER ID   IMAGE                                  COMMAND                  CREATED         STATUS                          PORTS     NAMES
9e415c417c1f   dlmcpaul/enphasecollector-arm:latest   "java -Djava.securit\u2026"   2 minutes ago   Restarting (1) 18 seconds ago             serene_darwin

pi@raspberrypi:~ $ !!
docker container ls
CONTAINER ID   IMAGE                                  COMMAND                  CREATED         STATUS                         PORTS     NAMES
9e415c417c1f   dlmcpaul/enphasecollector-arm:latest   "java -Djava.securit\u2026"   3 minutes ago   Restarting (1) 9 seconds ago             serene_darwin

pi@raspberrypi:~ $ !!
docker container ls
CONTAINER ID   IMAGE                                  COMMAND                  CREATED         STATUS                          PORTS     NAMES
9e415c417c1f   dlmcpaul/enphasecollector-arm:latest   "java -Djava.securit\u2026"   4 minutes ago   Restarting (1) 58 seconds ago             serene_darwin
pi@raspberrypi:~ $

dlmcpaul · 2022-07-05T08:45:37Z

Ok I rebuilt the image as a linux/arm/v7 one. You might have to force pull the new image.

I really need to figure out how to build multi-arch images

smacinto · 2022-07-06T06:13:40Z

Hi David,

Last night I forced the upload of the new image and restarted. enphasecollector-arm was running but not producing any output when I browse to the webpage??
I'm not sure how to debug docker - any ideas?

Thanks Stuart.

pi@raspberrypi:~ $ docker pull dlmcpaul/enphasecollector-arm
Using default tag: latest
latest: Pulling from dlmcpaul/enphasecollector-arm
36754881d0ec: Already exists 
c1a22ec594d8: Already exists 
9bc765178326: Already exists 
2965aa4bc865: Already exists 
93f308e998d2: Already exists 
62fd43bae890: Already exists 
39e2200e07ab: Already exists 
Digest: sha256:51f844c20456cfd7a9f9fa715dc853d3d583529eed2f2e3544ddafbb6a05f028
Status: Downloaded newer image for dlmcpaul/enphasecollector-arm:latest
docker.io/dlmcpaul/enphasecollector-arm:latest
pi@raspberrypi:~ $ 
pi@raspberrypi:~ $ 
pi@raspberrypi:~ $ docker rm -vf $(docker ps -a -q)
71f9b1999ae7
0f06e37ba2db
0f9889a80454
78de88394120
pi@raspberrypi:~ $ docker rmi -f $(docker images -a -q)
Untagged: dlmcpaul/enphasecollector-arm:latest
Untagged: dlmcpaul/enphasecollector-arm@sha256:51f844c20456cfd7a9f9fa715dc853d3d583529eed2f2e3544ddafbb6a05f028
Deleted: sha256:66ce280632c0a71449b5e3cc75d43e503014424039e8e3c76d409fb8ac8e0bf0
Deleted: sha256:971c9631811d834e5d20cc2eafaa5a4563a06e4d7311453df3c40006caf27dd0
Deleted: sha256:f07520dab6de8462a641c8ef1e4043da54db9418fdc8b73b5eb0ae8a80dde6b9
Deleted: sha256:0dd7dc98eff41e3c94d7ed4d75f69a417ee360d57c473775ca7ca54bb5deb14e
Deleted: sha256:0bb647ee62dda0eefafc838a9d468f1c2740d2b44774f2d4ebe444d565f56c83
Deleted: sha256:7a57c79d51dc2231350b540e03b7063975736b246ff2d3d239b3f6495eeedc14
Deleted: sha256:b9e493c93eba538c37f585e653ae4d534284194a13e290277a8ed80ae601f1b6
Deleted: sha256:9a56bec5e307ff2919e3a716e44effe4f6cf54a8fbac14e24d4d52bc27085f13
Untagged: dlmcpaul/enphasecollector:arm
Untagged: dlmcpaul/enphasecollector@sha256:6c926d38d80c91f9de0e675d70f8b85863d87809ca880c5bbb5b12faafc9ace5
Deleted: sha256:deaaca08f0b07b2b23c9f5f1b80bdacf537888d789150adab2bbe329966e4527
Deleted: sha256:518b535466dd300793c3a1d2824791a15be05dd73bd4ea892cd0fe3b5ffb9d55
Deleted: sha256:78a14ba642243d56546d02284b5a762b9f3947f7f06a0b5605d198a232def807
Deleted: sha256:560bfa762d4fe23308750e96582d3ad721a2a519e1077a6d60073c13b443c212
Deleted: sha256:a6ab3ff46ae547142883356a8476d93ea4c6f101dab771cf3a1dbee48271aec8
Deleted: sha256:e18b30a0e515d54707fbb2cd4310bca8dc15f947645c2634c833c4ac8014eedc
Deleted: sha256:c624189ba4a0d8f909568511e309e238161a02499e6d9cf5ed42e87f4e671819
Deleted: sha256:5bd86e6d94cb2880e4ca820c380db22984327fadf6acd5d93dae9afe561091ef
Untagged: hello-world:latest
Untagged: hello-world@sha256:f2266cbfc127c960fd30e76b7c792dc23b588c0db76233517e1891a4e357d519
Deleted: sha256:851163c78e4ad68e6fe5391f0894aafd164d40c4d4d0a56b4291f0dc2c75cc2c
Deleted: sha256:2536d8d4e4b1baa6515d44eb77a1402d6be0a533e7d191c51cb8428ba5ece3f4
pi@raspberrypi:~ $ docker system prune
WARNING! This will remove:
  - all stopped containers
  - all networks not used by at least one container
  - all dangling images
  - all dangling build cache

Are you sure you want to continue? [y/N] y
Total reclaimed space: 0B
pi@raspberrypi:~ $ docker images
REPOSITORY   TAG       IMAGE ID   CREATED   SIZE
pi@raspberrypi:~ $ 
pi@raspberrypi:~ $ docker pull dlmcpaul/enphasecollector-arm
Using default tag: latest
latest: Pulling from dlmcpaul/enphasecollector-arm
36754881d0ec: Pull complete 
c1a22ec594d8: Pull complete 
9bc765178326: Pull complete 
2965aa4bc865: Pull complete 
93f308e998d2: Pull complete 
62fd43bae890: Pull complete 
39e2200e07ab: Pull complete 
Digest: sha256:51f844c20456cfd7a9f9fa715dc853d3d583529eed2f2e3544ddafbb6a05f028
Status: Downloaded newer image for dlmcpaul/enphasecollector-arm:latest
docker.io/dlmcpaul/enphasecollector-arm:latest
pi@raspberrypi:~ $ 


pi@raspberrypi:~ $ docker container ls -a
CONTAINER ID   IMAGE                                  COMMAND                  CREATED        STATUS        PORTS                                       NAMES
18ce9f23f8f4   dlmcpaul/enphasecollector-arm:latest   "java -Djava.securit\u2026"   18 hours ago   Up 18 hours   0.0.0.0:8080->8080/tcp, :::8080->8080/tcp   charming_nightingale
pi@raspberrypi:~ $

Latest syntax:

pi@raspberrypi:~ $ docker run -d --restart unless-stopped --mount source=enphase,target=/internal_db \
> -e TZ=Australia/Sydney \
> -e ENVOY_CONTROLLER_PASSWORD=*** \
> -e ENVOY_CONTROLLER_HOST=*** \
> -e ENVOY_REFRESHSECONDS=15000 \
> -e ENVOY_PAYMENTPERKILOWATT=0.102 \
> -e ENVOY_CHARGEPERKILOWATT=0.288 \
> -e ENVOY_DAILYSUPPLYCHARGE=1.31 \
> -e ENVOY_BANDS[0].FROM=0700 \
> -e ENVOY_BANDS[0].TO=0859 \
> -e ENVOY_BANDS[0].COLOUR=#FA8072 \
> -e ENVOY_BANDS[1].FROM=1700 \
> -e ENVOY_BANDS[1].TO=1959 \
> -e ENVOY_BANDS[1].COLOUR=#FA8072 \
> -e ENVOY_BANDS[2].FROM=0900 \
> -e ENVOY_BANDS[2].TO=1659 \
> -e ENVOY_BANDS[2].COLOUR=#F0E68C \
> -e ENVOY_BANDS[3].FROM=2000 \
> -e ENVOY_BANDS[3].TO=2159 \
> -e ENVOY_BANDS[3].COLOUR=#F0E68C \
> -e ENVOY_BANDS[4].FROM=2200 \
> -e ENVOY_BANDS[4].TO=0659 \
> -e ENVOY_BANDS[4].COLOUR=#87CEEB \
> -p 8080:8080 \
> dlmcpaul/enphasecollector-arm:latest 
4e35567e1577c7edcf0fa648ca64b318c42105f3a3109fad23f5d8b16e01092f
pi@raspberrypi:~ $

dlmcpaul · 2022-07-06T07:26:23Z

docker logs containerid

This should output the logs from the app. Might want to pipe to a file as it might be large if lots of errors

smacinto · 2022-07-07T07:34:44Z

Hi David,

I tried running "docker logs" whilst running the enphasecollector-arm:latest container but didn't get any output. I reinstalled the original enphasecollector:arm container and it provides STDOUT output and also provides debug output from the "docker logs" command. I don't get any STDOUT output at all from enphasecollector-arm:latest container - No Spring Boot messages just nothing.

It's as if the program starts but doesn't do anything?? I have included the STDOUT output from enphasecollector:arm just in case it provides any clues.

Thanks Stuart.

docker run --mount source=enphase,target=/internal_db -e TZ=Australia/Sydney -e ENVOY_CONTROLLER_PASSWORD=*** -e ENVOY_CONTROLLER_HOST=*** -e ENVOY_REFRESHSECONDS=15000 -e ENVOY_PAYMENTPERKILOWATT=0.102 -e ENVOY_CHARGEPERKILOWATT=0.288 -e ENVOY_DAILYSUPPLYCHARGE=1.31 -e ENVOY_BANDS[0].FROM=0700 -e ENVOY_BANDS[0].TO=0859 -e ENVOY_BANDS[0].COLOUR=#FA8072 -e ENVOY_BANDS[1].FROM=1700 -e ENVOY_BANDS[1].TO=1959 -e ENVOY_BANDS[1].COLOUR=#FA8072 -e ENVOY_BANDS[2].FROM=0900 -e ENVOY_BANDS[2].TO=1659 -e ENVOY_BANDS[2].COLOUR=#F0E68C -e ENVOY_BANDS[3].FROM=2000 -e ENVOY_BANDS[3].TO=2159 -e ENVOY_BANDS[3].COLOUR=#F0E68C -e ENVOY_BANDS[4].FROM=2200 -e ENVOY_BANDS[4].TO=0659 -e ENVOY_BANDS[4].COLOUR=#87CEEB -p 8080:8080 dlmcpaul/enphasecollector:arm

. ____ _ __ _ _
/\ / ' __ _ () __ __ _ \ \ \
( ( )__ | '_ | '| | ' / ` | \ \ \
\/ )| |)| | | | | || (| | ) ) ) )
' || .__|| ||| |_, | / / / /
=========||==============|/=////
:: Spring Boot :: (v2.2.9.RELEASE)

2022-07-07 17:19:47.560 INFO 1 --- [ 2022-07-07 17:19:47.577 INFO 1 --- [ 2022-07-07 17:19:48.873 INFO 1 --- [ 2022-07-07 17:19:53.632 INFO 1 --- [ 2022-07-07 17:19:54.119 INFO 1 --- [ 2022-07-07 17:19:55.832 INFO 1 --- [ 2022-07-07 17:19:56.094 INFO 1 --- [ 2022-07-07 17:19:58.352 INFO 1 --- [ 2022-07-07 17:19:58.421 INFO 1 --- [ 2022-07-07 17:19:58.423 INFO 1 --- [ 2022-07-07 17:19:58.758 INFO 1 --- [ 2022-07-07 17:19:58.759 INFO 1 --- [ 2022-07-07 17:20:00.892 INFO 1 --- [ 2022-07-07 17:20:01.517 INFO 1 --- [ 2022-07-07 17:20:01.527 INFO 1 --- [ 2022-07-07 17:20:01.723 INFO 1 --- [ 2022-07-07 17:20:02.383 INFO 1 --- [ 2022-07-07 17:20:03.497 INFO 1 --- [ 2022-07-07 17:20:03.715 INFO 1 --- [ 2022-07-07 17:20:06.949 INFO 1 --- [ 2022-07-07 17:20:07.002 INFO 1 --- [ 2022-07-07 17:20:07.335 INFO 1 --- [ 2022-07-07 17:20:10.133 INFO 1 --- [ 2022-07-07 17:20:10.197 INFO 1 --- [ 2022-07-07 17:20:13.212 INFO 1 --- [ 2022-07-07 17:20:14.996 INFO 1 --- [ 2022-07-07 17:20:20.728 INFO 1 --- [ 2022-07-07 17:20:21.059 INFO 1 --- [ 2022-07-07 17:20:21.714 INFO 1 --- [ 2022-07-07 17:20:21.727 INFO 1 --- [ 2022-07-07 17:20:22.731 INFO 1 --- [ 2022-07-07 17:20:30.219 INFO 2022-07-07 17:20:30.220 INFO 2022-07-07 17:20:30.255 INFO 2022-07-07 17:21:17.086 INFO 2022-07-07 17:21:17.096 INFO 2022-07-07 17:21:17.106 INFO 2022-07-07 17:21:17.113 INFO 2022-07-07 17:21:17.123 INFO pi@raspberrypi:~ $ main] com.hz.EnphaseCollectorApplication : Starting EnphaseCollectorApplication vdevelopment-SNAPSHOT on e244ec8258a6 with PID 1 (/app.jar started by root in /)
main] com.hz.EnphaseCollectorApplication : No active profile set, falling back to default profiles: default
main] o.s.c.a.ConfigurationClassParser : Properties location [classpath:/release.properties] not resolvable: class path resource [release.properties] cannot be opened because it does not exist
main] .s.d.r.c.RepositoryConfigurationDelegate : Bootstrapping Spring Data JPA repositories in DEFAULT mode.
main] .s.d.r.c.RepositoryConfigurationDelegate : Finished Spring Data repository scanning in 439ms. Found 4 JPA repository interfaces.
main] trationDelegate$BeanPostProcessorChecker : Bean 'org.springframework.ws.config.annotation.DelegatingWsConfiguration' of type [org.springframework.ws.config.annotation.DelegatingWsConfiguration$$EnhancerBySpringCGLIB$$204e84ba] is not eligible for getting processed by all BeanPostProcessors (for example: not eligible for auto-proxying)
main] .w.s.a.s.AnnotationActionEndpointMapping : Supporting [WS-Addressing August 2004, WS-Addressing 1.0]
main] o.s.b.w.embedded.tomcat.TomcatWebServer : Tomcat initialized with port(s): 8080 (http)
main] o.apache.catalina.core.StandardService : Starting service [Tomcat]
main] org.apache.catalina.core.StandardEngine : Starting Servlet engine: [Apache Tomcat/9.0.37]
main] o.a.c.c.C.[Tomcat].[localhost].[/solar] : Initializing Spring embedded WebApplicationContext
main] w.s.c.ServletWebServerApplicationContext : Root WebApplicationContext: initialization completed in 10844 ms
main] o.hibernate.jpa.internal.util.LogHelper : HHH000204: Processing PersistenceUnitInfo [name: default]
main] org.hibernate.Version : HHH000412: Hibernate ORM core version 5.4.18.Final
main] org.hibernate.cfg.Environment : HHH000205: Loaded properties from resource hibernate.properties: {hibernate.bytecode.use_reflection_optimizer=false, hibernate.bytecode.provider=none}
main] o.hibernate.annotations.common.Version : HCANN000001: Hibernate Commons Annotations {5.1.0.Final}
main] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Starting...
main] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Start completed.
main] org.hibernate.dialect.Dialect : HHH000400: Using dialect: org.hibernate.dialect.H2Dialect
main] o.h.e.t.j.p.i.JtaPlatformInitiator : HHH000490: Using JtaPlatform implementation: [org.hibernate.engine.transaction.jta.platform.internal.NoJtaPlatform]
main] j.LocalContainerEntityManagerFactoryBean : Initialized JPA EntityManagerFactory for persistence unit 'default'
main] c.h.c.EnphaseRestClientConfig : Reading from insecure Envoy controller endpoint http://192.168.20.3
main] c.h.c.EnphaseSecureRestClientConfig : Reading from protected Envoy controller endpoint http://192.168.20.3
main] c.hz.components.ReleaseInfoContributor : Application Release with version unreleased
main] o.s.s.concurrent.ThreadPoolTaskExecutor : Initializing ExecutorService 'applicationTaskExecutor'
main] o.s.b.a.w.s.WelcomePageHandlerMapping : Adding welcome page template: index
main] o.s.s.c.ThreadPoolTaskScheduler : Initializing ExecutorService 'taskScheduler'
main] o.s.b.a.e.web.EndpointLinksResolver : Exposing 5 endpoint(s) beneath base path '/actuator'
main] o.s.b.w.embedded.tomcat.TomcatWebServer : Tomcat started on port(s): 8080 (http) with context path '/solar'
main] com.hz.EnphaseCollectorApplication : Started EnphaseCollectorApplication in 36.712 seconds (JVM running for 40.241)
main] com.hz.services.LocalDBService : Summarising Event table prior to 2022-07-07T00:00
1 --- [nio-8080-exec-1] o.a.c.c.C.[Tomcat].[localhost].[/solar] : Initializing Spring DispatcherServlet 'dispatcherServlet'
1 --- [nio-8080-exec-1] o.s.web.servlet.DispatcherServlet : Initializing Servlet 'dispatcherServlet'
1 --- [nio-8080-exec-1] o.s.web.servlet.DispatcherServlet : Completed initialization in 34 ms
1 --- [extShutdownHook] o.s.s.c.ThreadPoolTaskScheduler : Shutting down ExecutorService 'taskScheduler'
1 --- [extShutdownHook] o.s.s.concurrent.ThreadPoolTaskExecutor : Shutting down ExecutorService 'applicationTaskExecutor'
1 --- [extShutdownHook] j.LocalContainerEntityManagerFactoryBean : Closing JPA EntityManagerFactory for persistence unit 'default'
1 --- [extShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown initiated...
1 --- [extShutdownHook] com.zaxxer.hikari.HikariDataSource : HikariPool-1 - Shutdown completed.

dlmcpaul · 2022-07-11T06:47:10Z

I have pushed another arm version dlmcpaul/enphasecollector-arm:0.25

Try with the -it parameters to see what it logs

smacinto · 2022-07-11T07:34:52Z

Hi David,

It successfully downloaded but doesn't want to run with or without the "-it" option.

Thanks for your ongoing assistance.

pi@raspberrypi:~ $ docker run \
> --mount source=enphase,target=/internal_db \
> -e TZ=Australia/Sydney \
> -e ENVOY_CONTROLLER_PASSWORD=*** \
> -e ENVOY_CONTROLLER_HOST=**** \
> -e ENVOY_REFRESHSECONDS=15000 \
> -e ENVOY_PAYMENTPERKILOWATT=0.102 \
> -e ENVOY_CHARGEPERKILOWATT=0.288 \
> -e ENVOY_DAILYSUPPLYCHARGE=1.31 \
> -e ENVOY_BANDS[0].FROM=0700 \
> -e ENVOY_BANDS[0].TO=0859 \
> -e ENVOY_BANDS[0].COLOUR=#FA8072 \
> -e ENVOY_BANDS[1].FROM=1700 \
> -e ENVOY_BANDS[1].TO=1959 \
> -e ENVOY_BANDS[1].COLOUR=#FA8072 \
> -e ENVOY_BANDS[2].FROM=0900 \
> -e ENVOY_BANDS[2].TO=1659 \
> -e ENVOY_BANDS[2].COLOUR=#F0E68C \
> -e ENVOY_BANDS[3].FROM=2000 \
> -e ENVOY_BANDS[3].TO=2159 \
> -e ENVOY_BANDS[3].COLOUR=#F0E68C \
> -e ENVOY_BANDS[4].FROM=2200 \
> -e ENVOY_BANDS[4].TO=0659 \
> -e ENVOY_BANDS[4].COLOUR=#87CEEB \
> -p 8080:8080 \
> -it dlmcpaul/enphasecollector-arm:0.25
standard_init_linux.go:219: exec user process caused: exec format error
pi@raspberrypi:~ $

dlmcpaul · 2022-07-11T13:22:46Z

Well that error essentially says it is not a arm binary. I have tried resetting the arm builder but I am not hopeful I have fixed anything but you can try another image dlmcpaul/enphasecollector-arm:0.25

Can you also send me uname -m

The next thing to try might be to try and build on your raspberrypi

smacinto · 2022-07-12T01:06:06Z

Hi David,

Reran with the latest version and got the same result. The command "uname -m" reports armv7l. No problems me trying to build on the rasberrypi if you can give me a few pointers.

Thanks Stuart.

pi@raspberrypi:~ $ docker pull dlmcpaul/enphasecollector-arm:0.25
0.25: Pulling from dlmcpaul/enphasecollector-arm
df9b9388f04a: Already exists
67dca4d3c9d3: Pull complete
93f308e998d2: Pull complete
c4dfdfe4f897: Pull complete
0d923ba112e3: Pull complete
Digest: sha256:4de498d1d1b8bb5b7bf6f6a3b975886bd1a2f245b9ac4eebb020b240616cf700
Status: Downloaded newer image for dlmcpaul/enphasecollector-arm:0.25
docker.io/dlmcpaul/enphasecollector-arm:0.25
pi@raspberrypi:~ $
pi@raspberrypi:~ $
pi@raspberrypi:~ $
pi@raspberrypi:~ $ !-2
docker run --mount source=enphase,target=/internal_db -e TZ=Australia/Sydney -e ENVOY_CONTROLLER_PASSWORD=*** -e ENVOY_CONTROLLER_HOST=*** -e ENVOY_REFRESHSECONDS=15000 -e ENVOY_PAYMENTPERKILOWATT=0.102 -e ENVOY_CHARGEPERKILOWATT=0.288 -e ENVOY_DAILYSUPPLYCHARGE=1.31 -e ENVOY_BANDS[0].FROM=0700 -e ENVOY_BANDS[0].TO=0859 -e ENVOY_BANDS[0].COLOUR=#FA8072 -e ENVOY_BANDS[1].FROM=1700 -e ENVOY_BANDS[1].TO=1959 -e ENVOY_BANDS[1].COLOUR=#FA8072 -e ENVOY_BANDS[2].FROM=0900 -e ENVOY_BANDS[2].TO=1659 -e ENVOY_BANDS[2].COLOUR=#F0E68C -e ENVOY_BANDS[3].FROM=2000 -e ENVOY_BANDS[3].TO=2159 -e ENVOY_BANDS[3].COLOUR=#F0E68C -e ENVOY_BANDS[4].FROM=2200 -e ENVOY_BANDS[4].TO=0659 -e ENVOY_BANDS[4].COLOUR=#87CEEB -p 8080:8080 dlmcpaul/enphasecollector-arm:0.25
standard_init_linux.go:219: exec user process caused: exec format error
pi@raspberrypi:~ $
pi@raspberrypi:~ $
pi@raspberrypi:~ $ uname -m
armv7l
pi@raspberrypi:~ $

dlmcpaul · 2022-07-13T07:14:02Z

Ok lets try this

Download the Dockerfile-builder to your raspberry pi and try this command (and look out for the "dot" at the end)

docker build -f Dockerfile-builder -t smacinto/enphasecollector-arm:local --build-arg VERSION=0.25 .

You should end up with a local image called smacinto/enphasecollector-arm:local that matches your platform.

If there are errors in fetching the base images (azul/zulu-openjdk-alpine:17) then I suspect the problem is no images available for Java 17 on raspberry pi

smacinto · 2022-07-14T08:49:37Z

Hi David,

Unfortunately the build command failed?

pi@raspberrypi:~/Solar $ docker build -f Dockerfile-builder -t smacinto/enphasecollector-arm:local --build-arg VERSION=0.25 .
Sending build context to Docker daemon  273.9MB
Step 1/18 : FROM azul/zulu-openjdk-alpine:17 as builder
17: Pulling from azul/zulu-openjdk-alpine
df9b9388f04a: Already exists 
55f492bef161: Pull complete 
Digest: sha256:c8c75963a68c73159faf721f5c89e48637ad6c888c24dba171674659693964b7
Status: Downloaded newer image for azul/zulu-openjdk-alpine:17
 ---> 0371f5fc60b9
Step 2/18 : LABEL maintainer="[email protected]"
 ---> [Warning] The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm/v7) and no specific platform was requested
 ---> Running in b4f6cc97b314
Removing intermediate container b4f6cc97b314
 ---> b1c668fa0707
Step 3/18 : ARG VERSION
 ---> [Warning] The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm/v7) and no specific platform was requested
 ---> Running in 0b7153d1aece
Removing intermediate container 0b7153d1aece
 ---> 32cf34fcd87d
Step 4/18 : RUN wget -P / -O app.jar https://github.com/dlmcpaul/EnphaseCollector/releases/download/${VERSION}/enphasecollector-${VERSION}.jar
 ---> [Warning] The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm/v7) and no specific platform was requested
 ---> Running in 5003423c614c
standard_init_linux.go:219: exec user process caused: exec format error
The command '/bin/sh -c wget -P / -O app.jar https://github.com/dlmcpaul/EnphaseCollector/releases/download/${VERSION}/enphasecollector-${VERSION}.jar' returned a non-zero code: 1
pi@raspberrypi:~/Solar $

dlmcpaul · 2022-07-14T09:46:20Z

Ok, so this confirms my suspicions. It is not my build process failing it is a lack of a arm/v/7 java 17 image.

I will see if I can build a jar based on a lower version where there is an arm/v/7 image

dlmcpaul · 2022-07-14T13:48:36Z

Ok there is a dlmcpaul/enphasecollector-arm:0.25 image that uses Java 11 as a base image that should have a arm/v/7 os layer

smacinto · 2022-07-15T09:12:55Z

Thanks David - that one worked.

dlmcpaul · 2022-07-15T12:24:24Z

Glad to hear it. Might be a problem in future versions as I do want to start using Java 17. Might have to figure out how to install a java 17 runtime into a arm/v/7 base OS

auto-assign-issues bot assigned dlmcpaul Jul 6, 2020

dlmcpaul added enhancement New feature or request help wanted Extra attention is needed labels Jul 7, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

How to run on Android Device #6

How to run on Android Device #6

smacinto commented Jul 6, 2020

dlmcpaul commented Jul 7, 2020

smacinto commented Jul 7, 2020

dlmcpaul commented Jul 7, 2020

dlmcpaul commented Oct 17, 2020

smacinto commented Jul 17, 2021

smacinto commented Jul 5, 2022

dlmcpaul commented Jul 5, 2022

smacinto commented Jul 5, 2022

dlmcpaul commented Jul 5, 2022

smacinto commented Jul 6, 2022

dlmcpaul commented Jul 6, 2022 •

edited

Loading

smacinto commented Jul 7, 2022

dlmcpaul commented Jul 11, 2022

smacinto commented Jul 11, 2022

dlmcpaul commented Jul 11, 2022

smacinto commented Jul 12, 2022

dlmcpaul commented Jul 13, 2022

smacinto commented Jul 14, 2022

dlmcpaul commented Jul 14, 2022

dlmcpaul commented Jul 14, 2022

smacinto commented Jul 15, 2022

dlmcpaul commented Jul 15, 2022

How to run on Android Device #6

How to run on Android Device #6

Comments

smacinto commented Jul 6, 2020

dlmcpaul commented Jul 7, 2020

smacinto commented Jul 7, 2020

dlmcpaul commented Jul 7, 2020

dlmcpaul commented Oct 17, 2020

smacinto commented Jul 17, 2021

smacinto commented Jul 5, 2022

dlmcpaul commented Jul 5, 2022

smacinto commented Jul 5, 2022

dlmcpaul commented Jul 5, 2022

smacinto commented Jul 6, 2022

dlmcpaul commented Jul 6, 2022 • edited Loading

smacinto commented Jul 7, 2022

dlmcpaul commented Jul 11, 2022

smacinto commented Jul 11, 2022

dlmcpaul commented Jul 11, 2022

smacinto commented Jul 12, 2022

dlmcpaul commented Jul 13, 2022

smacinto commented Jul 14, 2022

dlmcpaul commented Jul 14, 2022

dlmcpaul commented Jul 14, 2022

smacinto commented Jul 15, 2022

dlmcpaul commented Jul 15, 2022

dlmcpaul commented Jul 6, 2022 •

edited

Loading