Skip to content

Latest commit

 

History

History
413 lines (298 loc) · 18.7 KB

rpi-os.md

File metadata and controls

413 lines (298 loc) · 18.7 KB

5: User processes and system calls

READING TIME: 40MIN

Objectives

Our kernel is evolving from an "embedded" kernel which often lacks user/kernel separation to a multiprogrammed kernel.

  • Run tasks in EL0

  • Add the syscall mechanism

  • Implement a few basic syscalls

NOTE: this experiment enables running user/kernel at different ELs. Yet, it does not NOT give each task its own address space — we are going to tackle this issue in lesson 6!

Get the code

Code location: p1-kernel/src/exp5

Please: do a git pull even if you have cloned the p1-kenel repo previously, in case of upstream updates.

Roadmap

  1. Implement the syscall mechanism, in particular switch between EL0 and EL1 (you have already done something similar in previous experiments!)
  2. Implement two mechanisms that put user tasks to EL0: (a) forking an existing user task at EL0; (b) moving a kernel task EL1 -> EL0

Syscall implementation

Each system call is a synchronous exception. A user program prepares all necessary arguments, and then runs svc instruction. Such exceptions are handled at EL1 by the kernel. The kernel validates all arguments, does the syscall, and exits from the exception. After that, the user task resumes at EL0 right after the svc instruction.

  • EL0 files: sys.h and sys.S
  • EL1 files: sys.h and sys.c

We have 4 simple syscalls (cf. sys.h):

  1. write outputs to UART. It accepts a buffer with the text to be printed as the first argument.
  2. clone creates a new user thread. The location of the stack for the newly created thread is passed as the first argument.
  3. malloc allocates a memory page for a user process. There is no analog of this syscall in Linux (and I think in any other OS as well.) The only reason that we have no virtual memory yet, and all user processes work with physical memory addresses. Each process needs a way to figure out which memory page can be used. malloc returns pointer to the newly allocated page or -1 in case of an error.
  4. exit Each process must call this syscall after it finishes execution. It will do cleanup.

An array sys_call_table (sys.c) contains pointers to all syscall handlers. Each syscall has a "syscall number" — this is just an index in the sys_call_table array. All syscall numbers are defined here — they are used by the assembler code to look up syscall.

Let's use write syscall as an example:

//sys.S, executed at the user level
.globl call_sys_write
call_sys_write:
    mov w8, #SYS_WRITE_NUMBER
    svc #0
    ret

The wrapper stores the syscall number in the w8 register and does svc. Convention: registers x0x7are used for syscall arguments and x8 is used to store syscall number. This allows a syscall to have up to 8 arguments.

In commodity OSes, such wrapper functions are usually in user library such as glibc but not in the kernel.

Switching between EL0 and EL1

Our kernel should support switches between EL1/EL1, and between EL1/EL0.

Previously, our kernel runs at EL1; when an interrupt occurs, it takes the interrupt at EL1. Now, we need to take exception (svc) from EL0 to EL1. To accommodate this, both kernel_entry and kernel_exit macros accepts an additional argument el, indicating the EL an exception is taken from. The information is required to properly save/restore stack pointer.

// kernel_entry (entry.S)
.if    \el == 0
mrs    x21, sp_el0
.else
add    x21, sp, #S_FRAME_SIZE
.endif 
// kernel_exit
.if    \el == 0
msr    sp_el0, x21
.endif 
...
eret

Even for the same task, we are using 2 distinct stacks for EL0 and EL1. This is needed to separate user/kernel.

Supported by CPU hardware, after taking an exception from EL0 to EL1, the CPU automatically starts use the SP for EL1. The SP for EL0 can be found in the sp_el0 register.

The value of this register must be stored and restored upon entering/exiting the kernel, even if the kernel does not use sp_el0 in the exception handler. Reason: we need to virtualize sp_el0 for each task because each task has its own user stack. Try to visualize this in your mind.

When we do kernel_exit, the EL to return to (EL0 or EL1) is encoded in the spsr_el1 register that was saved, e.g. when syscall enters the kernel. So we always return to the level from which the exception was taken.

How did we treat SP when taking interrupts (from EL1)? Revisit the figures in previous experiments.

Handling synchronous exceptions

In the exception table, el0_sync is registered as the handler for sync exception taken at EL0.

// entry.S
el0_sync:
    kernel_entry 0
    mrs    x25, esr_el1                // read the syndrome register
    lsr    x24, x25, #ESR_ELx_EC_SHIFT // exception class
    cmp    x24, #ESR_ELx_EC_SVC64      // SVC in 64-bit state
    b.eq   el0_svc
    handle_invalid_entry 0, SYNC_ERROR
  • As for all exception handlers, kernel_entry macro is called.

  • esr_el1 (Exception Syndrome Register) is checked. This register contains "exception class" field at offset ESR_ELx_EC_SHIFT. If exception class is equal to ESR_ELx_EC_SVC64 this means that the current exception is caused by the svc instruction and it is a system call. In this case, we jump to el0_svc label and show an error message otherwise.

// entry.S
sc_nr   .req    x25                  // number of system calls
scno    .req    x26                  // syscall number
stbl    .req    x27                  // syscall table pointer

el0_svc:
    adr    stbl, sys_call_table      // load syscall table pointer
    uxtw   scno, w8                  // syscall number in w8
    mov    sc_nr, #__NR_syscalls
    bl     enable_irq
    cmp    scno, sc_nr               // check upper syscall limit
    b.hs   ni_sys

    ldr    x16, [stbl, scno, lsl #3] // address in the syscall table
    blr    x16                       // call sys_* routine
    b      ret_from_syscall
ni_sys:
    handle_invalid_entry 0, SYSCALL_ERROR

el0_svc first loads the address of the syscall table in the stbl (it is just an alias to the x27 register.) and syscall number in the scno variable. Then interrupts are enabled and syscall number is compared to the total number of syscalls in the system — if it is greater or equal an error message is shown. If syscall number falls within the required range, it is used as an index in the syscall table array to obtain a pointer to the syscall handler. Next, the handler is executed and after it finishes ret_from_syscall is called.

Note, that we don't touch here registers x0x7 — they are transparently passed to the handler. (Why?)

Fast forward to the completion of syscall.

ret_from_syscall:
    bl    disable_irq
    str   x0, [sp, #S_X0]             // returned x0
    kernel_exit 0

ret_from_syscall first disables interrupts. Then it saves the value of x0 register on the stack. This is required because kernel_exit will restore all general purpose registers from their saved values, but x0 now contains return value of the syscall handler and we want this value to be passed to the user code. Finally kernel_exit is called, which returns to the user code.

Executing a task in user mode

Atop that, the kernel implements two complementary ways for launching a user process. Overview:


Method 1: Forking user processes

At the user level, user_process() calls call_sys_clone to spawn a new task.

// sys.S
.globl call_sys_clone
call_sys_clone:
    /* Save args for the child. They will be preserved throughout syscall  */
    mov    x10, x0                    /*fn*/
    mov    x11, x1                    /*arg*/
    mov    x12, x2                    /*stack*/

    /* Prep syscall args. Do the system call.  */
    mov    x0, x2                     /* stack  */
    mov    x8, #SYS_CLONE_NUMBER
    svc    0x0
    
    cmp    x0, #0
    beq    thread_start
    ret

thread_start:
    mov    x29, 0

    /* Pick up the function arg and execute.  */
    mov    x0, x11
    blr    x10
    
    /* We are done, pass the return value through x0.  */
    mov    x8, #SYS_EXIT_NUMBER
    svc    0x0

The clone wrapper above mimics the coresponding function from in the glibc library.

  1. x0-x3 contain syscall arguments. They are intended for the child task. Save fn and arg to x10-x11. Why? The kernel syscall handler el0_svc does not preserve x0-x3. The new task will pick up x10 and x11 in thread_start.
  2. Save the pointer to the new task's stack in x2, as expected by sys_clone(unsigned long stack).
  3. Starts syscall via svc.
  4. Upon returning from syscall, checks return value in x0:
    • if 0, we are executing inside the child task. In this case, execution goes to thread_start label.
    • If not 0, we are executing in the parent task. x0 is the PID of the child task.
  5. thread_start executes in the new task with the give entry function (x10) and the arg to the function (x11). Note x29 (FP) is cleared for correct stack unwinding at the user level.
  6. After the function finishes, exit syscall is performed — it never returns.

Implementing clone in kernel

Inside the kernel, clone() goes to is sys_clone() (sys.c). It just calls copy_process() . This function, however, has been modified since the last lesson.

int copy_process(unsigned long clone_flags, unsigned long fn, unsigned long arg, unsigned long stack)
{
    preempt_disable();
    struct task_struct *p;

    p = (struct task_struct *) get_free_page();
    if (!p) {
        return -1;
    }
    
    struct pt_regs *childregs = task_pt_regs(p);
    memzero((unsigned long)childregs, sizeof(struct pt_regs));
    memzero((unsigned long)&p->cpu_context, sizeof(struct cpu_context));
    
    // new addition
    if (clone_flags & PF_KTHREAD) {
        p->cpu_context.x19 = fn;
        p->cpu_context.x20 = arg;
    } else {
        struct pt_regs * cur_regs = task_pt_regs(current);
        *childregs = *cur_regs;
        childregs->regs[0] = 0;
        childregs->sp = stack + PAGE_SIZE;
        p->stack = stack;
    }
    p->flags = clone_flags;
    p->priority = current->priority;
    p->state = TASK_RUNNING;
    p->counter = p->priority;
    p->preempt_count = 1; //disable preemtion until schedule_tail
    
    p->cpu_context.pc = (unsigned long)ret_from_fork;
    p->cpu_context.sp = (unsigned long)childregs;
    int pid = nr_tasks++;
    task[pid] = p;
    preempt_enable();
    return pid;
}

If creating a new kernel thread, the function does the same thing as before. If creating a user thread, the function takes care of pt_regs as it is unique to a user thread -- the state saved/restored upon entering/exiting the kernel.

struct pt_regs * cur_regs = task_pt_regs(current);
*childregs = *cur_regs;
childregs->regs[0] = 0;
childregs->sp = stack + PAGE_SIZE;
p->stack = stack;

We populate the CPU context, i.e. pt_regs, for the new task. Note that pt_regs is always at the top of the stack page (recall the figure above), because when syscall enters/exits the kernel, the kernel stack is empty.

x0 in the new state is set to 0, because x0 will be the return value of the clone syscall. We've just seen how clone wrapper function uses this value to determine whether we are in the parent or the child task.

Next sp for the new task is set to point to the top of the new user stack page. We also save the pointer to the stack page in order to do a cleanup after the task finishes.

Method 2: Moving an existing kernel task to EL0

Overview: upon its creation, the kernel task calls its main function, kernel_process(), which calls move_to_user_mode(). The later prepares CPU context for exiting to EL0. Then kernel_process() returns to ret_from_fork which invokes the familiar kernel_exit. Eventually, an eret instruction - boom! We land in EL0.

Code walkthrough

First create a process (i.e. a task) as we did before. This is a "kernel" process to execute at EL1.

// kernel.c
int res = copy_process(PF_KTHREAD, (unsigned long)&kernel_process, 0, 0);

The kernel process invokes move_to_user_mode(), passing a function pointer to the user_process as the first argument.

void kernel_process() {
    printf("Kernel process started. EL %d\r\n", get_el());
    int err = move_to_user_mode((unsigned long)&user_process);
    ...

The move_to_user_mode function prepares pt_regs and the user stack, so the kernel process becomes a "legit" user process.

int move_to_user_mode(unsigned long pc)
{
    struct pt_regs *regs = task_pt_regs(current);
    memzero((unsigned long)regs, sizeof(*regs));
    regs->pc = pc;
    regs->pstate = PSR_MODE_EL0t;
    unsigned long stack = get_free_page(); //allocate new user stack
    if (!stack) {
        return -1;
    }
    regs->sp = stack + PAGE_SIZE;
    current->stack = stack;
    return 0;
}

pt_regs: the exception stack frame

In the previous experiment: when an interrupt happens, kernel_entry saves CPU context to a stack frame marked as "saved regs", which is somewhere in the middle of a kernel task's stack.

Dump pt_regs in GDB:

>>>  p /x *(struct pt_regs *)((char *)current + 4096 - sizeof(struct pt_regs))
$7 = {                                                              
regs = {[0x0] = 0x401fd0, [0x1] = 0x0, [0x2] = 0x401fe7, [0x3] = 0x401f40, [0x4] = 0x0 <repeats 25 times>, [0x1d] = 0x401fc0, [0x1e] = 0x8088c}, 
sp = 0x401fc0,                                               
pc = 0x830cc,                                                         
pstate = 0x60000000 }                                                 

Check where syscall happens:

>>> info line *0x830cc                                                                        
Line 7 of "src/sys.S" starts at address 0x830cc <call_sys_write+8> and ends at 0x830d0 <call_sys_
malloc>.                                                                                      

In this experiment, our kernel will additionally handle sync exceptions (syscalls). When a syscall happens, the CPU will create a stack frame in the same format called pt_regs. The name comes from Linux again. When syscall returns, the kernel unwinds pt_regs.

For the first time return to EL0, move_to_user_mode() sets up pt_regs:

  • pt_regs.pc This is the first instruction to be executed by the task once it lands in user mode via eret.

  • pstate. This specifies the CPU state for the task. Later, kernel_exit copies this field to spsr_el1. eret restores the CPU state from pstate. PSR_MODE_EL0t constant specifies that we will go to EL0. See manual.

  • Furthermore, move_to_user_mode allocates a new page for the user stack and sets sp field to point to the page top.

Where is pt_regs?

It is at the top of the stack. See the figure above. Right before kernel_exit(), the task's stack is unwound just to the beginning of pt_regs. Therefore, kernel_exit() will restore CPU regs from the stack.

task_pt_regs() calculates the address of a task's pt_regs. See the code below which is self-evident. Recall that THREAD_SIZE == 4KB which is the memory size for the task.

struct pt_regs * task_pt_regs(struct task_struct *tsk){
	unsigned long p = (unsigned long)tsk + THREAD_SIZE - sizeof(struct pt_regs);
	return (struct pt_regs *)p;
}

ret_from_fork(), augmented

New addition is made to the middle of the ret_from_fork function:

.globl ret_from_fork
ret_from_fork:
    bl    schedule_tail
    cbz   x19, ret_to_user            // not a kernel thread, go to ret_to_user
    mov   x0, x20
    blr   x19
    // kernel thread returns, and continues below
ret_to_user:
    bl disable_irq
    kernel_exit 0

Why are x19 and x20? That is where copy_process() saves the fn and arg specified for a new user process.

Now, after a kernel thread finishes, the execution jumps to ret_to_user, where it disables interrupts and performs exception return (kernel_exit), using previously prepared processor state.

If you get confused, revisit the "overview" figure:

Exiting a task

Each user task calls the exit syscall at the end of its life cycle. In the current implementation, the call_sys_clone wrapper calls exit; see above. Into the kernel, exit syscall goes to exit_process(), which deactivates a task. The function is listed below.

void exit_process(){
    preempt_disable();
    for (int i = 0; i < NR_TASKS; i++){
        if (task[i] == current) {
            task[i]->state = TASK_ZOMBIE;
            break;
        }
    }
    if (current->stack) {
        free_page(current->stack);
    }
    preempt_enable();
    schedule();
}

Following Linux convention, we are not deleting the task at once but set its state to TASK_ZOMBIE instead. This prevents the task from being selected and executed by the scheduler. In Linux such approach is used to allow parent process to query information about the child even after it finishes.

exit_process also deletes now unnecessary user stack and calls schedule. After schedule is called new task will be selected, that's why this system call never returns.

Conclusion

Now that the kernel can manage user tasks, we become much closer to the full process isolation. But one important step is still missing: all user tasks share the same physical memory and can easily read one another's data. In the next lesson, we are going to introduce virtual memory and fix this issue.