Skip to content

Latest commit

 

History

History
84 lines (65 loc) · 5.39 KB

README.md

File metadata and controls

84 lines (65 loc) · 5.39 KB

Internet of Things Code Recipes

The Internet of Things (IoT) aims to connect everything to the Internet by lightweight protocols and standards. Some commonly used protocols are presented here as an example of how an IoT application works.

There are three separate samples that pertain to different aspects of IoT.

  • Service Discovery
  • Wireless Sensor Network
  • Cloud Computing

To run these programs you need to have Contiki and Cooja installed on your machine. To get started with Contiki and cooja refer to its quickstart. If you have your contiki folder in /home/user/ you don't need to change the CONTIKI variable in MAKEFILEs; Otherwise, you have to change it to the installed path of contiki.

Citation- Please cite this paper when using this code for your research:

A. Al-Fuqaha, M. Guizani, M. Mohammadi, M. Aledhari and M. Ayyash, "Internet of Things: A Survey on Enabling Technologies, Protocols, and Applications," in IEEE Communications Surveys & Tutorials, vol. 17, no. 4, pp. 2347-2376, Fourthquarter 2015.

Service Discovery

This is an implementation and simulation of a service discovery protocol for Wireless Sensor Networks using multicast DNS (mDNS).

Every node that joins the network broadcasts a message containing its service description to the other nodes across the network. All client nodes that receive this packet register the service description and its corresponding provider to a local service lookup table. When a service is desired, the client seeks the service description in its lookup table. When a client finds the address of a service provider in its lookup table, it then sends a unicast message to the service provider requesting the desired service.

To run the program, you can open the prepared project with .csc extension. You can also follow these steps to configure your own project:

  1. Open Cooja simulator, create a new project and set a name for that. You can keep the default settings.
  2. Create a mote type based on Sky Mote.
  3. Upload the processing code (service_discovery_IoT.c) to the mote.
  4. Compile the code.
  5. Create mote type.
  6. Now you can add several instances of that mote to your environment.
  7. Start the simulation.

Wireless Sensor Network

This project is a simulation of wireless sensor network in which a sink node have to receive packets from motes to build a local table that identifies the closest anchor node to every non-anchor node in the network. Three different types of motes have been defined to address this problem:

  • Normal Motes that should send their closest anchor to the sink.
  • Anchor Motes which are some special motes near normal motes.
  • Sink Mote which is designed to gather information that comes from other motes.

We assume the signal speed is unified across the network. Also our measurement packets are in a same structure and size. So, packet propagation delay could be an indication of distance. ContikiRPL which is an implementation of RPL is used in this model as routing protocol. The underlying network layer is IPv6.

To run the program, open the prepared project with .csc extensionthe or follow the below steps to create a new project:

  1. Open Cooja simulator, create a new project and set a name for it. You can use default settings in your project.
  2. Create a Sky Mote and name it Normal mote.
  3. Upload the processing code (normal_mote.c) to the Normal mote.
  4. Compile Normal mote.
  5. Create mote type.
  6. Create a Sky Mote and name it Anchor mote.
  7. Upload the processing code (anchor_mote.c) to the Anchor mote.
  8. Compile the Anchor mote.
  9. Create mote type.
  10. Create another Sky Mote and name it Sink mote.
  11. Upload the processing code (sink_mote.c) to the Sink mote.
  12. Compile the Sink mote
  13. Create mote type.
  14. Now you can add several instances of these motes to your environment.
  15. Start the program.

Cloud Computing

It is a simple project that sends on behalf of sensors the temperature to the public Nimbits cloud using REST method. The code is executable in contiki as well as linux platforms and it can be ported to sensor devices by some minor changes. To be able to run this program, you need at first to create a Nimbits app account via a Google account. To get more information about the Nimbits account, you can refer to the Nimbits website and its user manual. The following steps are required to be done before running the program.

  1. Log into the public Nimbits cloud: https://cloud.nimbits.com
  2. On the panel, select your email account. Now it should be a single node without any children.
  3. Right click over email account and from the menu select creating new data point. Name your data point as "tempreture".
  4. Right click on your email again and from the menu select to create a new Read/Write key. This key (a.k.a secrete key) is a password for creating, deleting and changing data and is used in the program as one of POST parameters. For simplicity, we choose its permission level as "Read/Write to all points".
  5. Then you should change the variable email in the program to your own email and the key to your own Read/Write key.
  6. Now you are ready to run the program. The program generates random data as temperature and sends to the cloud.