Skip to content

Latest commit

 

History

History
928 lines (680 loc) · 36.9 KB

README_ADVANCED.md

File metadata and controls

928 lines (680 loc) · 36.9 KB

Advanced main.tf configurations

Changing product versions

Some modules have a product_version variable that determines the software product version. Specifically:

  • in server, proxy etc. product_version determines the SUSE Manager/Uyuni product version,
  • in minion, client, etc. product_version determines the SUSE Manager/Uyuni Tools version.

Legal values for released software are:

  • 4.0-released (latest released Maintenance Update for SUSE Manager 4.0 and Tools)
  • 4.1-released (latest released Maintenance Update for SUSE Manager 4.1 and Tools)
  • 4.2-released (latest released Maintenance Update for SUSE Manager 4.2 and Tools)
  • 4.3-released (latest released Maintenance Update for SUSE Manager 4.3 and Tools)
  • uyuni-released (latest released version for Uyuni Server, Proxy and Tools, from systemsmanagement:Uyuni:Stable)

Legal values for work-in-progress software are:

  • 4.0-nightly (corresponds to the Build Service project Devel:Galaxy:Manager:4.0)
  • 4.1-nightly (corresponds to the Build Service project Devel:Galaxy:Manager:4.1)
  • 4.2-nightly (corresponds to the Build Service project Devel:Galaxy:Manager:4.2)
  • 4.3-nightly (corresponds to the Build Service project Devel:Galaxy:Manager:4.3)
  • 4.3-beta (corresponds to the Build Service project SUSE:SLE-15-SP4:Update:Products:Manager43)
  • head (corresponds to the Build Service project Devel:Galaxy:Manager:Head, for server and proxyonly works with SLE15SP4 image)
  • uyuni-master (corresponds to the Build Service project systemsmanagement:Uyuni:Master, for server and proxy only works with openSUSE Leap image)

Legal values for CI:

uyuni-pr is a special product version used internally to test Pull Requests. Packages are under a subproject in systemsmanagement:Uyuni:Master:TEST and systemsmanagement:Uyuni:Master:PR. This is not meant to be used outside the Continous Integration system (CI).

Because packages are under different subprojects for each CI run and each Pull Request, repositories will be added later as additional repositories.

Note: the version of Salt on minions is determined by this value, as Salt is obtained from SUSE Manager Tools repos.

Note: on clients and minions only, the version number can be omitted to take the default for the distribution, eg. released and nightly are legal values.

A libvirt example follows:

module "suse-minion" {
  source = "./modules/minion"
  base_configuration = module.base.configuration

  name = "min-sles15sp1"
  image = "sles15sp1o"
  server_configuration = module.proxy.configuration
  product_version = "4.0-nightly"
}

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "server"
  product_version = "4.0-released"
}

Changing Operating Systems

You can specify a base OS in most modules specifying an image variable.

For some modules like minion, image is mandatory and Terraform will refuse to apply plans if it is missing. Please refer to modules/<backend>/base/main.tf for the exact list of supported OSs.

For other modules like server there is a default selection if nothing is specified. Please note that not all OS combinations might be supported, refer to official documentation to select a compatible OS.

The following example creates a SUSE Manager server using "nightly" packages from version 4.2 based on SLES 15 SP3:

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  image = "sles15sp3o"
  name = "server"
  product_version = "4.2-nightly"
}

Official OS images

Many projects/vendors provide official OS images for the various backends, and sumaform uses them when available. The name for those images is suffixed with an "o" (eg. sles15o).

Switching to another backend

Changing the backend normally means destroying the current one (see "Working on multiple configuration sets" to maintain multiple).

The following steps need to be performed:

  • Clean the current Terraform state
    • Consider run terraform destroy
    • Remove the terraform.tfstate file
  • Adapt the main.tf file to the new provider specific properties
  • remove folder .terraform
  • Create a new backend symbolic link to point to the new backend. From the modules folder run:
ln -sfn ../backend_modules/<BACKEND> modules/backend

Multiple VMs of the same type

Some modules, for example clients and minions, support a quantity variable that allows you to create several instances at once. For example:

module "suse-minion" {
  source = "./modules/minion"
  base_configuration = module.base.configuration

  name = "min-sles12sp5"
  image = "sles12sp5o"
  server_configuration = module.server.configuration
  quantity = 10
}

This will create 10 minions connected to the server.

Jenkins (PoC)

If you are running sumaform for Uyuni and you want Continuous Integration, you can a setup a Jenkins instance using the jenkins module.

For now, the module provides Jenkins with the following plugins enabled:

  • swarm
  • git
  • git-client
  • workflow-aggregator
  • extended-choice-parameter
  • timestamper
  • htmlpublisher
  • rebuild
  • http_request
  • ansicolor
  • greenballs

Authentication is enabled, and a user admin is created. The password can be found at /var/lib/jenkins/secrets/initialAdminPassword at the Jenkins instance.

To enable Jenkins, use the following definition:

module "jenkins" {
  source             = "./modules/jenkins"
  base_configuration = module.base.configuration
}

Usually you will want to use this on public clouds, but if you want to use this in libvirt, you are encouraged to use a separate pool, as explained for the mirror below.

Mirror

If you are using sumaform outside of the SUSE Nuremberg network you should use a special extra virtual machine named mirror that will cache packages downloaded from the SUSE engineering network for faster access and lower bandwidth consumption.

It will be be used exclusively by other VMs to download SUSE content - that means your SUSE Manager servers, clients, minions and proxies will be "fully disconnected", not requiring Internet access to operate.

To enable mirror, add mirror = "mirror.tf.local" to the base section in main.tf and add the following module definition:

module "mirror" {
  source = "./modules/mirror"
  base_configuration = module.base.configuration

  volume_provider_settings = {
    pool = "data"
  }
}

Note you are encouraged to specify an additional libvirt storage pool name (data in the example above). Downloaded content will be placed on a separate disk in this pool - it helps SUSE Manager performance significantly if the pool is mapped onto a different physical disk. You can configure a pool with virt-manager like in the following image:

data pool configuration in virt-manager

Omitting the volume_provider_settings pool variable results in the default "default" storage pool being used.

The mirror can also synchronize Ubuntu official repositories. To enable mirroring Ubuntu versions add the corresponding version numbers to the ubuntu_distros variable as follows:

module "mirror" {
  source = "./modules/mirror"
  base_configuration = module.base.configuration

  ubuntu_distros = ['16.04', '18.04']
}

Note that mirror must be populated before any host can be deployed. By default, its cache is refreshed nightly via cron, as configured in /etc/cron.daily. You can also schedule a one-time refresh by running manually some of the scripts that reside in /usr/local/bin directory.

Mirror only for Server (products synchronization)

In addition to the parameter mirror, which will wrap this case, you might only want to setup a mirror for server products synchronization, but not for the repositories used by sumaform during the deployment of your environment. For that use case, instead of mirror use server_mounted_mirror parameter inside the server module definition.

Virtual hosts

Virtualization hosts are Salt minions that are also capable to run virtual machines using the KVM or Xen hypervisor.

An example follows:

module "virthost" {
  source = "./modules/virthost"
  base_configuration = module.base.configuration
  server_configuration = module.srv.configuration
  ...
  name = "min-kvm"
  image = "sles15sp1o"
  hypervisor = "kvm"
  ...
  provider_settings = {
    vcpu = 3
    memory = 2048
  }
}

The created virtual host will get the same CPU model its host has. This means that in order for virtual hosts to host virtual machines, nested virtualization has to be enabled on the physical machine. For this, the kvm_intel or kvm_amd kernel modules need to have nested parameter set to 1. To check if nested virtualization is enabled on the physical machine, the following command needs to return either 1 or Y:

# For intel CPU:
cat /sys/module/kvm_intel/parameters/nested

# For AMD CPU:
cat /sys/module/kvm_amd/parameters/nested

The generated virtual host will be setup with:

  • a default virtual network or nat type with 192.168.42.1/24 IP addresses,
  • a default virtual storage pool of dir type targeting /var/lib/libvirt/images
  • and a VM template disk image located in /var/testsuite-data/disk-image-template.qcow2.

The template disk image is the opensuse153 image used by sumaform and is downloaded when applying the highstate on the virtual host. In order to use another or a cached image, use the hvm_disk_image variable. If the hvm_disk_image is set to the empty string, no image will be copied in /var/testsuite-data/. For example, to use a local image copy it in salt/virthost/ folder and set hvm_disk_image = "salt://virthost/imagename.qcow2"

The template disk image for Xen paravirtualized virtual machines is the openSUSE 15.1 JeOS image and is downloaded when applying the highstate on the Xen virtual host. As for the other image template, in order to use another or a cached image, use the xen_disk_image variable.

Note that the Xen virtualization host will be rebooted when applying the highstate in order to use the newly installed Xen kernel.

Turning convenience features off

By default, sumaform deploys hosts with a range of tweaked settings for convenience reasons. If in your use case this is not wanted, you can turn those off via the following variables.

  • client module:
    • auto_register: automatically registers clients to the SUSE Manager Server. Set to false for manual registration
    • disable_firewall: disables the firewall making all ports available to any host. Set to false to only have typical SUSE Manager ports open
    • sles_registration_code : only for sles, register client with SCC key and enable modules during deployment. Set to null by default to use repositories for deployment
  • minion module:
    • auto_connect_to_master: automatically connects to the Salt Master. Set to false to manually configure
    • disable_firewall: disables the firewall making all ports available to any host. Set to false to only have typical SUSE Manager ports open
    • sles_registration_code : only for sles, register client with SCC key and enable modules during deployment. Set to null by default to use repositories for deployment
  • sshminion module:
    • disable_firewall: disables the firewall making all ports available to any host. Set to false to only have typical SUSE Manager ports open
  • host module:
    • disable_firewall: disables the firewall making all ports available to any host. Set to false to only have typical SUSE Manager ports open
  • proxy module:
    • minion: whether to configure this Proxy as a Salt minion. Set to false to have the Proxy set up as a traditional client
    • auto_connect_to_master: automatically connects to the Salt Master. Set to false to manually configure. Requires minion to be true
    • auto_register: automatically registers the proxy to its upstream Server or Proxy. Defaults to false, requires minion to be false
    • download_private_ssl_key: automatically copies SSL certificates from the upstream SUSE Manager Server or SUSE Manager Proxy. Requires publish_private_ssl_key on the upstream server or proxy. Set to false for manual distribution
    • install_proxy_pattern: install proxy pattern with all proxy-related software. Set to false to install manually
    • auto_configure: automatically runs the confure-proxy.sh script which enables Proxy functionality. Set to false to run manually. Requires auto_register, download_private_ssl_key, and install_proxy_pattern
    • generate_bootstrap_script: generates a bootstrap script for traditional clients and copies it in /pub. Set to false to generate manually. Requires auto_configure
    • publish_private_ssl_key: copies the private SSL key in /pub for cascaded Proxies to copy automatically. Set to false for manual distribution. Requires download_private_ssl_key
    • disable_firewall: disables the firewall making all ports available to any host. Set to false to only have typical SUSE Manager ports open
    • proxy_registration_code : register proxy with SCC key and enable modules needed for SUMA Proxy during deployment. Set to null by default to use repositories for deployment
  • server module:
    • auto_accept: whether to automatically accept minion keys. Set to false to manually accept
    • create_first_user: whether to automatically create the first user (the SUSE Manager Admin)
      • server_username and server_password: define credentials for the first user, admin/admin by default
    • disable_firewall: disables the firewall making all ports available to any host. Set to false to only have typical SUSE Manager ports open
    • allow_postgres_connections: configure Postgres to accept connections from external hosts. Set to false to only allow localhost connections
    • unsafe_postgres: use PostgreSQL settings that improve performance by worsening durability. Set to false to ensure durability
    • skip_changelog_import: import RPMs without changelog data, this speeds up spacewalk-repo-sync. Set to false to import changelogs
    • mgr_sync_autologin: whether to set mgr-sync credentials in the .mgr-sync file. Requires create_first_user
    • create_sample_channel: whether to create an empty test channel. Requires create_first_user
    • create_sample_activation_key: whether to create a sample activation key. Requires create_first_user
    • create_sample_bootstrap_script: whether to create a sample bootstrap script for traditional clients. Requires create_sample_activation_key
    • publish_private_ssl_key: copies the private SSL key in /pub for Proxies to copy automatically. Set to false for manual distribution
    • disable_download_tokens: disable package token download checks. Set to false to enable checking
    • forward_registration: enable forwarding of registrations to SCC (default off)
    • server_registration_code : register server with SCC key and enable modules needed for SUMA Server during deployment. Set to null by default to use repositories for deployment
    • login_timeout: define how long the webUI login cookie is valid (in seconds). Set to null by default to leave it up to the application default value.
    • db_configuration : pass external database configuration to change setup_env.sh file. See more in Using external database section

Adding channels to SUSE Manager Servers

You can specify a set of SUSE official channels to be added at deploy time of a SUSE Manager Server. This operation is typically time-intensive, thus it is disabled by default. In order to add a channel, first get the label name from an existing SUSE Manager Server:

# mgr-sync list channels --compact
Available Channels:
...
[ ] sles12-sp5-pool-x86_64

Then add it to the channels variable in a SUSE Manager Server module:

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "server"
  product_version = "4.2-nightly"
  channels = ["sles12-sp5-pool-x86_64"]
}

Setting the wait_for_reposync variable to true will result into sumaform waiting for reposync to finish after channels are added.

Cloning channels in SUSE Manager Servers upon deployment

Channels specified via the channels variable above can be automatically cloned by date at deploy time. This operation is typically time-intensive, thus it is disabled by default. In order to clone channels specified via the channels variable, you need to specify the cloning details in a cloned_channels variable according to the following syntax:

[{ channels = ["<PARENT_CHANNEL_NAME>", "<CHILD_CHANNEL_1_NAME>", ...],
  prefix   = "<CLONE_PREFIX>",
  date     = "<YYYY-MM-DD>"
}]

A libvirt example follows:

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "server"
  product_version = "4.2-nightly"
  channels = ["sles12-sp3-pool-x86_64", "sles12-sp3-updates-x86_64"]
  wait_for_reposync = true
  cloned_channels = [
    { channels = ["sles12-sp3-pool-x86_64", "sles12-sp3-updates-x86_64"],
      prefix   = "cloned-2017-q3",
      date     = "2017-09-30"
    }
  ]
}

At deploy time the spacewalk-clone-by-date will be used for each channel set. Note that it is required that the parent channel is always specified in the cloned channel list.

Activation keys are also automatically created for each clone with the name 1-<CLONE_PREFIX>.

Shared resources, prefixing, sharing virtual hardware

Whenever multiple sumaform users deploy to the same virtualization hardware (eg. libvirt host) it is recommended to set the name_prefix variable in the base module in order to have a unique per-user prefix for all resource names. This will prevent conflicting names.

Additionally, it is possible to have only one user to upload images and other shared infrastructure such as mirrors, having all other users re-use them. In order to accomplish this:

  • add a use_shared_resources = true variable to the base module of all users but one
  • make sure there is exactly one user that does not have the variable set, make sure this user has no name_prefix set. This user will deploy shared infrastructure for all users

Disabling Avahi and Avahi reflectors

SUSE Manager requires both direct and reverse domain names resolution. This can be provided by either DNS (client-server, unicast mode) or Avahi (peer-to-peer, multicast mode, only for .local domain).

Note that Avahi is not available in environments that disable multicast UDP, notably AWS, so the following is only relevant for the libvirt backend, where it is enabled by default.

Avahi can be disabled if it is not needed. A typical example is a libvirt environment in bridged networking mode where all VMs have static MAC addresses and DNS names known in advance. Avahi can be disabled via something like:

module "base" {
  ...
  use_avahi = false
  domain = "mgr.suse.de"
  ...
}

module "server" {
  ...

  provider_settings = {
    mac = "42:54:00:00:00:66"
  }
  ...
}

If Avahi is enabled and you are running Docker on a minion, you will need an Avahi reflector on the minion to provide multicast domain name resolution inside of the containers. A typical example is the Cucumber testsuite which uses such a setup. An Avahi reflector can be enabled via:

module "minion" {
  ...
  avahi_reflector = true
  ...
}

If you will be adding Windows minions, you should disable Avahi in sumaform, as for historical reasons mDNS and resolution of .local and .lan is broken and will not work. Do not trust any source saying it works on Windows 10 (there are lots of "ifs" and "buts"), or can be fixed with Bonjour Printing Services (not for .local).

Additional network and SUSE Manager for Retail

You may get an additional, isolated, network, with neither DHCP nor DNS by specifying for example:

module "base" {
  ...
  provider_settings = {
    additional_network = "192.168.5.0/24"
  }
  ...
}

This will create a network named private, with your prefix in front of the name (e.g. prefix-private).

You may use that additional network to test SUSE Manager for Retail with the test suite or manually.

For each VM, you can decide whether it connects to the base network and/or to the additional network by specifying:

connect_to_base_network = false
connect_to_additional_network = true

When there are two connections, the first network interface eth0 gets connected to base network, and the second interface eth1 gets connected to the additional network. When there is only one connection, the card is always eth0, no matter to which network it is connected.

Some modules have preset defaults: SUSE Manager/Uyuni Servers and the testsuite controller connect only to the base network, while SUSE Manager/Uyuni Proxies and clients or minions connect to both networks.

Custom SSH keys

If you want to use another key for all VMs, specify the path of the public key with ssh_key_path into the base config. Example:

module "base" {
  ...
  ssh_key_path = "~/.ssh/id_mbologna_terraform.pub"
  ...
}

The ssh_key_path option can also be specified on a per-host basis. In this case, the key specified is treated as an additional key, copied to the machine as well as the ssh_key_path specified in the base section.

If you don't want to copy any ssh key at all (and use passwords instead), just supply an empty file (eg. ssh_key_path = "/dev/null").

SSH access without specifying a username

You can add the following lines to ~/.ssh/config to avoid checking hosts and specifying a username:

Host *.tf.local
StrictHostKeyChecking no
UserKnownHostsFile=/dev/null
User root

Activation Keys for minions

You can specify an Activation Key string for minions to use at onboarding time to a SUSE Manager Server. An example follows:

module "suse-minion" {
  source = "./modules/minion"
  base_configuration = module.base.configuration

  name = "min"
  image = "sles12sp5o"
  server_configuration = module.server.configuration
  activation_key = "1-DEFAULT"
}

Proxies

A proxy module is similar to a client module but has a product_version and a server variable pointing to the upstream server. You can then point clients to the proxy, as in the example below:

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "server"
  product_version = "4.1-nightly"
}

module "proxy" {
  source = "./modules/proxy"
  base_configuration = module.base.configuration

  name = "proxy"
  product_version = "4.1-nightly"
  server_configuration = module.server.configuration
}

module "suse-client" {
  source = "./modules/client"
  base_configuration = module.base.configuration

  name = "cli-sles12sp5"
  image = "sles12sp5o"
  server_configuration = module.proxy.configuration
  quantity = 3
}

Note that proxy chains (proxies of proxies) also work as expected. You can find a list of customizable variables for the proxy module in modules/libvirt/proxy/variables.tf.

Note that systems prepared by this module are by default registered as a Salt minions. If this is not desired you can switch off Salt minion registration by setting the minion flag to false:

module "proxy" {
  source = "./modules/proxy"
  base_configuration = module.base.configuration

  name = "proxy"
  product_version = "4.2-nightly"
  server_configuration = module.server.configuration

  minion = false
}

Inter-Server Sync (ISS)

Create two SUSE Manager server modules and add iss_master and iss_slave variable definitions to them, as in the example below:

module "master" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "master"
  product_version = "4.2-released"
  iss_slave = "slave.tf.local"
}

module "slave" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "slave"
  product_version = "4.2-released"
  iss_master = module.master.configuration["hostname"]
}

Please note that iss_master is set from master's module output variable hostname, while iss_slave is simply hardcoded. This is needed for Terraform to resolve dependencies correctly, as dependency cycles are not permitted.

Also note that this requires create_first_user and publish_private_ssl_key settings to be true (they are by default).

Working on multiple configuration sets (workspaces) locally

Terraform supports working on multiple infrastructure resource groups with the same set of files through the concept of workspaces. Unfortunately those are not supported for the default filesystem backend and do not really work well with different main.tf files, which is often needed in sumaform.

As a workaround, you can create a local_workspaces directory with a subdirectory per workspace, each containing main.tf and terraform.tfstate files, then use symlinks to the sumaform root:

~/sumaform$ find local_workspaces/
local_workspaces/
local_workspaces/aws-demo
local_workspaces/aws-demo/main.tf
local_workspaces/aws-demo/terraform.tfstate
local_workspaces/libvirt-testsuite
local_workspaces/libvirt-testsuite/main.tf
local_workspaces/libvirt-testsuite/terraform.tfstate
~/sumaform$ ls -l main.tf
... main.tf -> local_workspaces/libvirt-testsuite/main.tf
~/sumaform$ ls -l terraform.tfstate
... -> local_workspaces/libvirt-testsuite/terraform.tfstate

Plain hosts

You can have totally unconfigured hosts in your configuration by using the host module, for example if you need to test bootstrapping.

An example follows:

module "vanilla" {
  source = "./modules/host"
  base_configuration = module.base.configuration

  name = "vanilla"
  image = "sles12sp5o"
}

Build hosts

Build hosts have more repositories, so they can build Docker container and Kiwi images.

Building Kiwi images is needed for starting PXE boot hosts (see below) in Retail context.

An example follows:

module "build-host"
{
  source = "./modules/build_host"
  base_configuration = module.base.configuration

  name = "buildhost"
  image = "sles15sp3o"
}

PXE boot hosts

PXE boot hosts are unprovisioned hosts that are capable of booting from their networking card. Additionally, they have a hardware type of "Genuine Intel" to make provisioning via SUSE Manager for Retail easier.

"unprovisioned" means that they are completely unprepared: no SSH keys, no initialization at all.

SUSE Manager makes use of PXE booting in two use cases: cobbler, and Retail.

An example follows:

module "pxeboot-minion"
{
  source = "./modules/pxe_boot"
  base_configuration = module.base.configuration

  name = "pxeboot"
  image = "sles12sp5o"
}

SMT

You can configure SUSE Manager instances to download packages from an SMT server instead of SCC, in case a mirror is not used:

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "server"
  product_version = "4.2-nightly"
  smt = "http://smt.suse.de"
}

Custom repos and packages

You can specify additional custom repos and packages to be installed at deploy time for a specific host:

module "suse-minion" {
  source = "./modules/minion"
  base_configuration = module.base.configuration

  name = "min-sles12sp5"
  image = "sles12sp5o"
  server_configuration = module.server.configuration

  additional_repos = {
    virtualization_containers = "http://download.opensuse.org/repositories/Virtualization:/containers/SLE_12_SP2/"
  }

  additional_packages = [
    "terraform"
  ]
}

If you want to have full control over repos, you can also choose to disable all repos but those explicitly mentioned in additional_repos via the additional_repos_only boolean variable.

If any repos or packages additionally need SSL certificates to be accessed, those can be added via the additional_certs variable:

additional_certs = {
  RHN-ORG-TRUSTED-SSL-CERT = "http://server.tf.local/pub/RHN-ORG-TRUSTED-SSL-CERT"
}

Add custom repo GPG keys

If you need extra GPG keys to be installed for package installation, you can add them via the gpg_keys list variable to a module. The list contains paths relative to the salt/ directory, as in the following example:

module "suse-sshminion" {
  source = "./modules/host"
  base_configuration = module.base.configuration
  name = "minssh-sles12sp5"
  image = "sles12sp5o"
  gpg_keys = ["default/gpg_keys/galaxy.key"]
}

Prometheus/Grafana monitoring

It is possible to install Prometheus exporters on a SUSE Manager Server instance via the monitored flag. Those can be consumed by Prometheus and Grafana server to analyze visually. A libvirt example follows:

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "server"
  product_version = "head"
  monitored = true
}

module "grafana" {
  source = "./modules/grafana"
  base_configuration = module.base.configuration
  server_configuration = module.server.configuration
}

Grafana is accessible at http://grafana.tf.local with username and password admin.

Please note for the Java probes to work the java_debugging setting has to be enabled in the server module (it is by default).

Container registry

You can run a basic container registry as per the following example:

module "registry" {
  source = "./modules/registry"
  base_configuration = module.base.configuration

  name = "registry"
}

The registry will be available on port 80 (unencrypted http) and without authentication.

evil-minions load generator

evil-minions is a Salt load generator useful for performance tests and demoing. It contains tools to "record" behavior of a Salt minion and to "play it back" multiple times in parallel in order to test the Salt Master or SUSE Manager Server.

In order to create an evil-minions load generator, you have to define a regular minion module, and use the evil_minion_count variable on it. This will create an instance of a minion, and on top of it will set up the evil-minions load generator, which will create evil_minion_count replicas of the actual minion.

It is also possible to set up a delay on the response time of the replicas. By default, the replicas will respond as fast as possible, which might not be appropriate depending on the objectives of your simulation. To reproduce delays observed by the original minion, use the evil_minion_slowdown_factor variable, as follows:

  • 0.0, the default value, makes evil minions respond as fast as possible
  • 1.0 makes evil-minion introduce delays to match the response times of the original minion
  • 2.0 makes evil-minion react twice as slow as the original minion
  • 0.5 makes evil-minion react twice as fast as the original minion

For more information, visit the evil-minions project page at here.

A libvirt example follows:

module "minion" {
  source = "./modules/minion"
  base_configuration = module.base.configuration

  name = "minion"
  image = "sles15sp1o"
  server_configuration = module.server.configuration
  evil_minion_count = 10
  evil_minion_slowdown_factor = 1
}

Use Locust for http load testing

You can deploy a locust host to test http performance of your SUSE Manager Server. An example would be:

module "locust" {
  source = "./modules/locust"
  base_configuration = module.base.configuration
  server_configuration = module.server.configuration
  // optionally, specify a custom locustfile:
  // locust_file = "./my_locustfile.py"
}

If locust_file is not specified, a minimal example is installed. To run the load test, execute run-locust on the Locust host.

This host can also be monitored via Prometheus and Grafana by adding locust_configuration to a grafana module:

module "grafana" {
  source = "./modules/grafana"
  base_configuration = module.base.configuration
  server_configuration = module.server.configuration
  locust_configuration = module.locust.configuration
}

In case you need to simulate a big amount of users, Locust's master-slave mode can be enabled by specifying a number of slaves:

module "locust" {
  source = "./modules/locust"
  base_configuration = module.base.configuration
  server_configuration = module.server.configuration
  locust_file = "./my_heavy_locustfile.py"
  slave_quantity = 5
}

Use Operating System updates (released and unreleased)

It is possible to run SUSE Manager servers, proxies, clients and minions with the latest packages of the operating system (for now, only SLE is supported) instead of outdated ones, including updates currently in QAM, that is, upcoming updates. This is useful to spot regressions early, and can be activated via the use_os_released_updates (respectively use_os_unreleased_updates) flag. Libvirt example:

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "server"
  product_version = "head"
  use_os_unreleased_updates = true
}

Email configuration

With the default configuration, whenever SUSE Manager server hosts are configured to use root@hostname -d as the email sender. The recipient's SMTP server may discard those emails since they come from a non-existent domain name.

This setting can be overridden with a custom 'from' address by supplying the parameter: from_email. A libvirt example would be:

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "server"
  product_version = "head"

  from_email = "[email protected]"
}

Internal Server Errors and relative stacktraces are sent via e-mail by default to [email protected]. By suppling the parameter traceback_email you can override that address to have them in your inbox:

module "sumamail3" {
  source = "./modules/server"
  base_configuration = module.base.configuration

  name = "sumamail3"
  product_version = "head"

  traceback_email = "[email protected]"
}

Swap file configuration

You can add a swap file to most hosts, to prevent out-of-memory conditions.

Please note that some systems already come with some swap file or swap partition of their own: Ubuntu and CentOS minions, and SUSE Manager server.

A libvirt example is:

module "minion" {
   ...
   swap_file_size = 2048 // in MiB
   ...
}

To disable the swap file, set its size to 0.

Additional disk on Server or Proxy

In case the default disk size for those machines is not enough for the amount of products you want to synchronize, you can add an additional disk which will mount the first volume in /var/spacewalk with size repository_disk_size. This additional disk will be created in the pool specified by data_pool.

An example follows:

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration
  product_version = "4.0-nightly"
  name = "server"
  repository_disk_size = 500
  volume_provider_settings = {
    pool = "default"
  }
}

Debugging facilities

The server module has options to automatically capture more diagnostic information, off by default:

  • java_debugging: enable Java debugging and profiling support in Tomcat and Taskomatic
  • postgres_log_min_duration: log PostgreSQL statements taking longer than the duration (expressed as a string, eg. 250ms or 3s), or log all statements by specifying 0

Using external database

Currently, sumaform only support RDS database. The server need to be created in public cloud ( by default AWS). It's possible to get RDS in private network shared by server in aws. RDS module return automatically the parameters needed to configure rhn.conf throught setup_env.sh .

Output variable Type Description
hostname string RDS hostname that will be use for MANAGER_DB_HOST and REPORT_DB_HOST
superuser string superuser to connect database, it will be use to create MANAGER_USER user and both database
superuser_password string superuser password
port string RDS port ( by default 5432)
certificate string Certificate use to connect RDS database. Certificate is provided by AWS
local boolean Set to false to use external database

Example :

module "rds" {
   source             = "./modules/rds"
   name               = ...
   base_configuration = module.base.configuration
   db_username        = ...
   db_password        = ...
}

module "server" {
  source = "./modules/server"
  base_configuration = module.base.configuration
  db_configuration = module.db.configuration

}