This is a GPLv3+ implementation of standalone EFI File System drivers, based on the GRUB 2.0 read-only drivers.
For additional info as well as precompiled drivers, see https://efi.akeo.ie
- Visual Studio 2022 (Windows), MinGW (Windows), gcc (Linux) or EDK2.
- A git client able to initialize/update submodules
- QEMU v2.7 or later if debugging with Visual Studio (NB: You can find QEMU Windows binaries here)
- Fetch the git submodules with
git submodule init
andgit submodule update
.
NOTE This only works if you cloned the directory usinggit
. - Apply
0001-GRUB-fixes.patch
to thegrub\
subdirectory. This applies the changes that are required for successful compilation of GRUB.
- Open the solution file and hit
F5
to compile and debug the default driver.
- Run
make
in the top directory. If needed you can also issue something likemake ARCH=<arch> CROSS_COMPILE=<tuple>
where<arch>
is one ofia32
,x64
,arm
,aa64
orriscv64
(the official UEFI abbreviations for an arch, as used in/efi/boot/boot[ARCH].efi
) and<tuple>
is the one for your cross-compiler, such asarm-linux-gnueabi-
oraarch64-linux-gnu-
. e.g.make ARCH=aa64 CROSS_COMPILE=aarch64-linux-gnu-
- Open an elevated command prompt and create a symbolic link called
EfiFsPkg
, inside your EDK2 directory, to the EfiFs source. On Windows, from an elevated prompt, you could run something likemklink /D EfiFsPkg C:\efifs
, and on Linuxln -s ../efifs EfiFsPkg
. - From a command prompt, set Grub to target the platform you are compiling for
by invoking:
- (Windows)
set_grub_cpu.cmd <arch>
- (Linux)
./set_grub_cpu.sh <arch>
Where<arch>
is one ofia32
,x64
,arm
,aarch64
orriscv64
.
Note that you MUST invoke theset_grub_cpu
script every time you switch target.
- (Windows)
- After having invoked
edksetup.bat
(Windows) oredksetup.sh
(Linux) run something like:wherebuild -a X64 -b RELEASE -t <toolchain> -p EfiFsPkg/EfiFsPkg.dsc
<toolchain>
is something likeVS2022
(Windows) orGCC5
(Linux).
NB: To build an individual driver, such as NTFS, you can also use something like:build -a X64 -b RELEASE -t <toolchain> -p EfiFsPkg/EfiFsPkg.dsc -m EfiFsPkg/EfiFsPkg/Ntfs.inf
- A Windows script to build the drivers, using EDK2 with VS2022 is also provided
as
edk2_build_drivers.cmd
.
If QEMU is installed, the Visual Studio solution will set up and test the
drivers using QEMU (by also downloading a sample image for each target file
system). Note however that VS debugging expects a 64-bit version of QEMU to be
installed in C:\Program Files\qemu\
(which you can download here).
If that is not the case, you should edit .msvc\debug.vbs
accordingly.
For testing outside of Visual Studio, make sure you have at least one disk with a target partition using the target filesystem, that is not being handled by other EFI filesystem drivers. Then boot into the EFI shell and run the following:
load fs0:\<fs_name>_<arch>.efi
or wherever your driver was copiedmap -r
this should make a newfs#
available, egfs2:
- You should now be able to navigate and access content (in read-only mode)
- For logging output, set the
FS_LOGGING
shell variable to 1 or more - To unload use the
drivers
command, thenunload
with the driver ID
Please be mindful that, to enable ARM/ARM64 compilation support in Visual Studio 2022, you MUST go to the Individual components screen in the setup application and select the ARM compilers and libraries there, as they do NOT appear in the default Workloads screen:
This is a pure GPLv3+ implementation of EFI drivers. Great care was taken not to
use any code from non GPLv3 compatible sources, such as rEFInd's fsw_efi
(GPLv2 only) or Intel's FAT driver (requires an extra copyright notice).
Note however that some files (the non grub_####
sources under ./src/
) are
licensed under GPLv2+ rather than GPLv3+ and that, just like the GPLv3+ sources,
we took great care of ensuring that we are fully compliant with any licensing
or relicensing matters, so that they can legally be reused into GPLv2+ works.
sudo apt install nasm uuid-dev gcc-multilib gcc-aarch64-linux-gnu gcc-arm-linux-gnueabi gcc-riscv64-linux-gnu
git clone --recurse-submodules https://github.com/tianocore/edk2.git
cd edk2
make -C BaseTools
git clone --recurse-submodules https://github.com/pbatard/EfiFs.git EfiFsPkg
cd EfiFsPkg/grub
git apply ../0001-GRUB-fixes.patch
cd -
export GCC5_ARM_PREFIX=arm-linux-gnueabi-
export GCC5_AARCH64_PREFIX=aarch64-linux-gnu-
export GCC5_RISCV64_PREFIX=riscv64-linux-gnu-
source edksetup.sh --reconfig
./EfiFsPkg/set_grub_cpu.sh X64
build -a X64 -b RELEASE -t GCC5 -p EfiFsPkg/EfiFsPkg.dsc
./EfiFsPkg/set_grub_cpu.sh IA32
build -a IA32 -b RELEASE -t GCC5 -p EfiFsPkg/EfiFsPkg.dsc
./EfiFsPkg/set_grub_cpu.sh AARCH64
build -a AARCH64 -b RELEASE -t GCC5 -p EfiFsPkg/EfiFsPkg.dsc
./EfiFsPkg/set_grub_cpu.sh ARM
build -a ARM -b RELEASE -t GCC5 -p EfiFsPkg/EfiFsPkg.dsc
./EfiFsPkg/set_grub_cpu.sh RISCV64
build -a RISCV64 -b RELEASE -t GCC5 -p EfiFsPkg/EfiFsPkg.dsc