Skip to content

Latest commit

 

History

History
44 lines (33 loc) · 2.2 KB

readme.md

File metadata and controls

44 lines (33 loc) · 2.2 KB
Raw

Using Mods with Node-RED MCU Edition

Copyright 2023, Moddable Tech, Inc. All rights reserved.
Peter Hoddie
Updated January 9, 2023

Introduction

Mods are a Moddable SDK feature for adding JavaScript code into a firmware image. For Node-RED MCU Edition mods allow you to install most of the code once and then install your Node-RED flows on top of that. Building and installing the mod is considerably faster, making for much faster development turnaround. Mods are compiled to byte-code on your development computer before being installed.

To learn about Mods in-depth see the Mods documentation.

Using Mods

Build & Install the Host

Node-RED MCU Edition provides a basic mod host. It is built and installed using mcconfig:

cd $(PATH TO node-red-mcu)
mcconfig -d -m -p esp32 ./mods/host/manifest.json

Build & Run a Mod

Use mcrun to install the flows. If your flows are located at (PATH to node-red-mcu)/flows.json, do this:

cd $(PATH TO node-red-mcu)
mcrun -d -m -p esp32 ./mods/mod/manifest.json

Configuring Wi-Fi

There are two options for configuring Wi-Fi:

  1. Pass the ssid and password to mcconfig as usual. These will be the default credentials for any mod loaded
  2. Pass the ssid and password to mcrun. These will be used in place of the default credentials
mcrun -d -m -p esp32 ssid="my wi-fi" password="secret" ./mods/mod/manifest.json

Notes

  • It is important to use the correct platform identifier (esp32, esp32/moddable_two, etc) for your target device. If there is a mismatch between the platform used to build the host and to build the mod, the mod may not work.
  • Not all hosts support mods. If the installed host does not support mods, mcrun reports an error.
  • Installing mods with mcrun requires a debug build. Instrumented and Release builds do not support mods in Node-RED MCU Edition at this time.
  • Using a Host plus Mod requires more flash storage and memory. As a result, Mods are not practical for all projects on all devices. For example, they are not recommended on ESP8266.
  • Mods are supported in the mcsim simulator on macOS, Windows, and Linux.