You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
in the /boot/config.txt and configuring the screen setup with wdisplay | Screen Configuration (ARandR) I have the hyperpixel4 properly working alongside an HDMI display with the touchscreen working as intended. But... When logging in via ReelVNC I have two issues:
1 - the x and y axis of the mouse input are swapped
2 - the resolution of RealVNC defaults to DPI-1 = 800x480 and not the HDMI main display
Any help to resolve this is much appreciated!
Output from the debug script:
# Platform Information
Revision : d03114
No LSB modules are available.
Description: Debian GNU/Linux 12 (bookworm)
6.1.0-rpi7-rpi-v8
## Touchscreen logs
Rectangular: Goodix
[ 8.634057] Goodix-TS 22-0014: supply AVDD28 not found, using dummy regulator
[ 8.675878] Goodix-TS 22-0014: supply VDDIO not found, using dummy regulator
[ 8.684017] Goodix-TS 22-0014: ID 911, version: 1060
[ 8.856850] input: 22-0014 Goodix Capacitive TouchScreen as /devices/platform/i2c@0/i2c-22/22-0014/input/input67
[ 8.945740] Goodix-TS 22-005d: supply AVDD28 not found, using dummy regulator
[ 8.946418] Goodix-TS 22-005d: supply VDDIO not found, using dummy regulator
[ 8.993898] Goodix-TS 22-005d: Error reading 1 bytes from 0x8140: -6
[ 9.019819] Goodix-TS 22-005d: Error reading 1 bytes from 0x8140: -6
[ 9.063501] Goodix-TS 22-005d: I2C communication failure: -6
Square: ft5
## I2C Devices and Mappings
/dev/i2c-20
/dev/i2c-21
/dev/i2c-22
Error: Could not open file `/dev/i2c-2' or `/dev/i2c/2': No such file or directory
## Boot Config
# For more options and information see
# http://rptl.io/configtxt
# Some settings may impact device functionality. See link above for details
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
# Additional overlays and parameters are documented
# /boot/firmware/overlays/README
# Automatically load overlays for detected cameras
camera_auto_detect=1
# Automatically load overlays for detected DSI displays
display_auto_detect=1
# Automatically load initramfs files, if found
auto_initramfs=1
# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d
max_framebuffers=2
# Enable Hyperpixel 4.0 Touchscreen
dtoverlay=vc4-kms-dpi-hyperpixel4
dtparam=rotate=90
# Don't have the firmware create an initial video= setting in cmdline.txt.
# Use the kernel's default instead.
disable_fw_kms_setup=1
# Run in 64-bit mode
arm_64bit=1
# Disable compensation for displays with overscan
disable_overscan=1
# Run as fast as firmware / board allows
arm_boost=1
[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1
[all]
hdmi_enable_4kp60=1
The text was updated successfully, but these errors were encountered:
Habraken
changed the title
Hyperpixel4 | Raspberry Pi OS (64bit) | Bookworm | Wayland | RealVNC
Hyperpixel4 | Raspberry Pi OS (64bit) | Bookworm | Wayland | RealVNC | x and y axis swapped
Jan 8, 2024
After adding the suggested lines
in the /boot/config.txt and configuring the screen setup with wdisplay | Screen Configuration (ARandR) I have the hyperpixel4 properly working alongside an HDMI display with the touchscreen working as intended. But... When logging in via ReelVNC I have two issues:
1 - the x and y axis of the mouse input are swapped
2 - the resolution of RealVNC defaults to DPI-1 = 800x480 and not the HDMI main display
Any help to resolve this is much appreciated!
Output from the debug script:
The text was updated successfully, but these errors were encountered: