Skip to content

Latest commit

 

History

History
162 lines (115 loc) · 8.14 KB

README.md

File metadata and controls

162 lines (115 loc) · 8.14 KB

ESP8266-WiFi-Socket-3

Alternative Firmware for

Precompiled Firmware

Find binaries in github releases

Compile

This is a PlatformIO project.

Firmware Reset

  1. Power on the WiFi Socket (plug in)
  2. Press down and hold the Power-Button during the first 5s
  3. Release Power-Button when the WiFi LED starts rapidly fast blinking
  4. The firmware reset ends after about 30s indicated by a permanent WiFi LED on.

Default Settings

After a firmware reset the following values are set.

value description
Admin password admin Setup admin password
WiFi Mode AP Accesspoint- or Station-Mode
WiFi SSID WifiSocketII-esp id SSID in accesspoint mode
WiFi Password 12345678 Default WiFi password
Network Mode DHCP Network mode STATIC or DHCP *1
Network IP-Address 192.168.192.1 device ip address *2
Network Mask 255.255.255.0 Subnet mask *2
Network Gateway 192.168.192.1 Default gateway *2
Network DNS 192.168.192.1 DNS server address *2
OTA Hostname wifi-socket-1 Over The Air hostname
OTA Password otapass OTA firmware upload password
OpenHAB Callback Enabled false
OpenHAB Version 1 Callback for OpenHAB version 1 or 2
OpenHAB Item Voltage PowerMeter1Voltage ('-' = disables this item)
OpenHAB Item Current PowerMeter1Current ('-' = disables this item)
OpenHAB Item Power PowerMeter1Power ('-' = disables this item)
OpenHAB Item Name WifiSocket1
OpenHAB Host 192.168.1.1
OpenHAB Port 80
OpenHAB Use Authentication false
OpenHAB User user  
OpenHAB Password password  
OpenHAB SendingInterval 60 interval time in seconds (0=disable)
MQTT Enabled false  
MQTT ClientId WifiSocket1  
MQTT Host 192.168.1.1
MQTT Port 1883
MQTT Use Authentication false
MQTT User user  
MQTT Password password  
MQTT In Topic socket1/in  receiving commands
MQTT Out Topic socket1/out  sending callback
MQTT Topic Voltage powermeter1/voltage  ('-' = disables this topic)
MQTT Topic Current powermeter1/current  ('-' = disables this topic)
MQTT Topic Power powermeter1/power  ('-' = disables this topic)
MQTT Topic JSON powermeter1/json  sending all values in JSON format
MQTT Sending Interval 60  interval time in seconds (0=disable)

*1 In WiFi Station-Mode only

*2 will be overwritten from DHCP-Response

Hardware

OpenHAB

OpenHAB - HTTP Binding sample

Switch LivingRoom_Power "Living Room Outlet" {http=">[ON:GET:http://wifi-socket.ip/on] >[OFF:GET:http://wifi-socket.ip/off]"}

If you like to read the state of the socket by OpenHAB. First create a file getState.js in the transform directory with the following content:

JSON.parse(input).state;

add

<[http://wifi-socket.ip/state:30000:JS(getState.js)]

to the Switch definition. Every 30s the state of the socket will be checked.

OpenHAB - MQTT binding sample for the switch and the energy monitor values

MQTT Binding Version 1.x

Switch WifiSocketBwShp6 "BW SHP6 Ein / Aus" {mqtt=">[mosquitto:socket-bw/in:command:ON:1],>[mosquitto:socket-bw/in:command:OFF:0],<[mosquitto:socket-bw/out:state:default]"}

Number WifiSocketBwShp6Voltage "BW SHP6 Voltage [%.1fV]" {mqtt="<[mosquitto:socket-bw/voltage:state:default]"}

Number WifiSocketBwShp6Current "BW SHP6 Current [%.2fA]" {mqtt="<[mosquitto:socket-bw/current:state:default]"}

Number WifiSocketBwShp6Power "BW SHP6 Power [%.1fW]" {mqtt="<[mosquitto:socket-bw/power:state:default]"}

MQTT Binding Version 2.x

For the Binding Version 2.x it is necessary to configure the MQTT Thing and according to that the items.

mqtt.things:

Bridge mqtt:broker:mosquitto "Mosquitto" [ host="127.0.0.1", secure=false, clientID="MotherShip", username="$MQTT_USERNAME", password="$MQTT_PASSWORD"]
{
   Thing topic socket-bw "BW SHP6" {
    Channels:
     Type switch : state "BW SHP6 Ein / Aus" [ stateTopic="wsocket-bw/out", on="ON", off="OFF", commandTopic="socket-bw/in", on="ON", off="OFF" ]
     Type string : voltage [ stateTopic="wsocket-bw/voltage" ]
     Type string : current [ stateTopic="wsocket-bw/current" ]
     Type string : power [ stateTopic="wsocket-bw/power" ]
   }

}

mqtt.items:

Switch WifiSocketBwShp6 "BW SHP6 Ein / Aus" { channel="mqtt:topic:mosquitto:socket-bw:state" }

Number WifiSocketBwShp6Voltage "BW SHP6 Voltage [%.1fV]" { channel="mqtt:topic:mosquitto:socket-bw:voltage" }

Number WifiSocketBwShp6Current "BW SHP6 Current [%.2fA]" { channel="mqtt:topic:mosquitto:socket-bw:current" }

Number WifiSocketBwShp6Power "BW SHP6 Power [%.1fW]" { channel="mqtt:topic:mosquitto:socket-bw:power" }

References