Skip to content

Latest commit

 

History

History
39 lines (27 loc) · 2.71 KB

Importing_Racer_tracks.md

File metadata and controls

39 lines (27 loc) · 2.71 KB
Raw

Directions for importing Racer tracks

  • Unzip and put racer files in temporary folder RACER_TP (temporary track path). Make sure the path has no spaces (dof2joe doesn't like spaces).

  • Create new folder for track in track editor folder TRACKEDITOR_TP.

  • Convert all texture names to lowercase in RACER_TP via

    find . -type f -name \*.tga|sort -r|awk '{f=tolower($1);
if(f!=$1 && p[f]!=1){print "mv "$1" "f}p[$1]=1}' | /bin/sh

  • Make folder TRACKEDITOR_TP/objects/

  • Run the following command:

    dof2joe/dof2joe -p TRACKEDITOR_TP/objects/ RACER_TP/*.dof

If there are thousands of .dof files, you may have to do this in steps to avoid a "too many arguments" error from your shell. This will take a while. Textures are automatically converted using nconvert. No filenames should have spaces.

  • Open track editor data/tracks/editor.config and set active track to TRACKEDITOR_TP.

  • Run the track editor. Trace the roadways and mark the starting position (press H for help).

  • cd to the TRACKEDITOR_TP/objects folder (this is important, the packfile stores relative paths) and run

    joepack/joepack -c objects.jpk *.joe

  • Copy TRACKEDITOR_TP into the main VDrift tracks folder VDRIFT_TP. Erase VDRIFT_TP/objects/*.joe (since they are in the pack file).

  • Add VDRIFT_TP/about.txt and ensure that the first line is the name of the track.

  • Run VDrift and check out what the track looks like in-game. Note that you will only be able to drive on the roadways you defined in the track editor since no other surfaces have been flagged as collideable. Also take a screenshot for the track selection screen.

  • Add the track selection screenshot to VDRIFT_TP/trackshot.png (hopefully these png files will be moved into the folders of the individual tracks soon).

  • Open up all of the texture files in TRACKEDITOR_TP/objects and review which textures belong to objects that should be collide-able (roads and walls), have full brightness (trees), be mipmapped (fences and fine transparent objects should not be mipmapped), or be skyboxes.

  • Any textures that have transparent areas are usually colored #FF00FF in the Racer textures. You'll need to make these truly transparent in the PNG files. An easy way to do this is to use ImageMagick. Use the commands

    mogrify -transparent rgb`\(255,0,255\)` *.png
mogrify -fill rgb`\(128,128,128\)` -opaque rgba`\(255,0,255,0\)` *.png

This can be scripted to speed things up of course.

  • Set the correct object properties using the trackeditor/listedit Listedit tool.
  • Done!

Category:Tracks