Makefile.user.default

#User-defined values for ML build system
#Copy me to Makefile.user, keeping ONLY the options that you want to customize

UNAME:=$(shell uname)

ifeq ($(UNAME), Darwin)
	# Variable declaration for Mac OS X
	UMOUNT=hdiutil unmount
	CF_CARD="/Volumes/EOS_DIGITAL"
	STAT_CMD=stat -f "%N: %z bytes"
else
	# Default settings for remaining operating systems
	UMOUNT=umount
	# some distros may require:
	# UMOUNT=sudo umount
	# CF_CARD=/media/EOS_DIGITAL
	CF_CARD = $(call eval_once,CF_CARD,$(shell mount | grep -oE "[^ ]+/EOS_DIGITAL[^ ]*"))
	STAT_CMD=stat -c "%n: %s bytes"
endif

# change this if you have to mount the card every time you run "make install"
# examples:
# MOUNT_CARD=gio mount -d /dev/mmcblk0p1
# MOUNT_CARD=gio mount dav://192.168.0.1/
MOUNT_CARD=

# Experimental setup for Wi-Fi SD cards
# to enable, run this before "make install":
#    export WIFI_SD=y
# alternatives: "make install WIFI_SD=y", "WIFI_SD=y make install"
# override network names and IP address in Makefile.user
# fixme: how to enable it from Makefile.user?
ifeq ($(WIFI_SD),y)
  # fill in the name of your regular wifi network
  # leave this empty to disable wifi after installation
  WIFI_MAIN_NETWORK=<your regular wifi network>
  
  # these are for Toshiba FlashAir; you may have to change them for other wifi cards
  # note: if the wifi card connects directly to a router and gets a fixed IP,
  # just enter your regular wifi network name here as well
  WIFI_CARD_NETWORK=flashair
  WIFI_CARD_IP=192.168.0.1
  CF_CARD=/run/user/1000/gvfs/dav:host=$(WIFI_CARD_IP),ssl=false
  
  # executed before installation
  # connect to WIFI_CARD_NETWORK if not already,
  # and mount card directory via WebDAV
  # also monitor the connection in background while the card is mounted (signal tends to be weak)
  INSTALL_PREPARE=$(call build,WIFI_SET,\
    if ! nmcli conn show --active | grep $(WIFI_CARD_NETWORK) > /dev/null; then \
      while ! nmcli device wifi list | grep $(WIFI_CARD_NETWORK); do \
        if [ `nmcli radio wifi` = disabled ]; \
          then nmcli radio wifi on; sleep 5; \
          else nmcli dev wifi rescan 2>/dev/null || true; sleep 2; \
        fi; \
        echo -n "."; \
      done; \
      nmcli conn up $(WIFI_CARD_NETWORK); \
    fi; \
    for i in `seq 1 20`; do \
        if ping -c 3 -l 3 -W 1 $(WIFI_CARD_IP) > /dev/null; then break; fi; \
        echo -n "."; \
    done; \
    if ping -c 3 -l 3 -W 1 $(WIFI_CARD_IP) > /dev/null; then \
      if ! gio mount -l | grep "dav://$(WIFI_CARD_IP)/"; then \
        gio mount dav://$(WIFI_CARD_IP)/ ; \
      fi; \
    else \
      echo "$(WIFI_CARD_IP) appears to be offline." ; \
      exit 1; \
    fi; \
    ( while gio mount -l | grep -q "dav://$(WIFI_CARD_IP)/"; do \
        if ! ping -c 3 -l 3 -W 1 $(WIFI_CARD_IP) > /dev/null; then \
           echo -n "!"; \
        fi; \
        sleep 1; \
     done \
     ) & \
  )
  
  # restore connection to your main wifi network
  # or just turn it off if you are using a wired network
  WIFI_RESTORE=$(call build,WIFI_END,\
    if [ "$(WIFI_MAIN_NETWORK)" = "" ]; then \
      echo "Turning off Wi-Fi..."; \
      nmcli radio wifi off; \
    elif ! nmcli conn show --active | grep $(WIFI_MAIN_NETWORK) > /dev/null; then \
      echo "Connecting to $(WIFI_MAIN_NETWORK)..."; \
      nmcli conn up $(WIFI_MAIN_NETWORK); \
    fi; )
  
  UMOUNT_CARD=$(call build,UNMOUNT,\
    while ! gio mount -u dav://$(WIFI_CARD_IP)/; do \
      sleep 2; \
    done \
  )
  
  # executed after installation
  define INSTALL_FINISH =
	$(UMOUNT_CARD)
	$(WIFI_RESTORE)
	@printf "\nFinished.\nMake sure the camera will not write anything to the card until restart.\n"
  endef
endif

# GCC-related stuff
# for yagarto or the official ARM toolchain use ARM_ABI=none-eabi otherwise use ARM_ABI=elf
# for linaro bare-metal toolchain, use ARM_ABI=eabi
ARM_ABI=none-eabi

# example: GCC_VERSION=-5.4.1
# use default if unspecified
GCC_VERSION=

# use this one if installed on the system
# otherwise, use the one from executable PATH
PREFERRED_ARM_PATH=~/gcc-arm-none-eabi-5_4-2016q3
#PREFERRED_ARM_PATH=~/gcc-linaro-7.1.1-2017.08-i686_arm-eabi

DIETLIB_VERSION=0.33
DIETLIBC_OPT_LEVEL=Os
NEWLIB_OPT_LEVEL=O3

NEWLIB_PATH=$(SRC_DIR)/libs/arm-$(ARM_ABI_LIB)-$(NEWLIB_OPT_LEVEL)
DIETLIBC_PATH=$(SRC_DIR)/libs/dietlib-$(DIETLIB_VERSION)-$(ARM_ABI_LIB)-$(DIETLIBC_OPT_LEVEL)

# Static libraries used
ARM_LIBGCC_A=$(shell $(CC) -print-libgcc-file-name)
NEWLIB_LIBM_A=$(NEWLIB_PATH)/libm.a
NEWLIB_LIBC_A=$(NEWLIB_PATH)/libc.a
DIETLIBC_A=$(DIETLIBC_PATH)/dietlibc.a

ML_LIBC = dietlibc.a newlib-libc.a newlib-libm.a gcc-libgcc.a

OBJCOPY=$(CROSS_COMPILE)objcopy
OBJDUMP=$(CROSS_COMPILE)objdump
AR=$(CROSS_COMPILE)ar
RANLIB=$(CROSS_COMPILE)ranlib
READELF=$(CROSS_COMPILE)readelf
LD=$(CROSS_COMPILE)ld
STRIP=$(CROSS_COMPILE)strip

#
# Host compiler settings
# 
HOST_CC=$(shell which gcc)
HOST_LD=$(shell which ld)
HOST_AR=$(shell which ar)

# You can customize CFLAG here
HOST_CFLAGS=-g -O3 -W -Wall -fms-extensions -std=c99 
HOST_LFLAGS=
HOST_LIBS=

# large file support
# you can also get them with $(shell getconf LFS_CFLAGS)
HOST_LFS_FLAGS=-DLARGEFILES -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 


#
# mingw cross compiler settings
# 
MINGW=i686-w64-mingw32
MINGW_GCC=$(MINGW)-gcc
MINGW_AR=$(MINGW)-ar

MINGW_CFLAGS=-g -O3 -W -Wall -fms-extensions -std=c99 -m32
MINGW_LFLAGS=
MINGW_LIBS=
MINGW_LFS_FLAGS=-DLARGEFILES -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 

#
# Additional binaries
#
CCACHE=ccache
GREP=grep
AWK=awk
PYTHON=python2
RST2LATEX=rst2latex.py

#
# QEMU installation directory
# used for "make install_qemu"
#
QEMU_DIR ?= qemu-eos
QEMU_PATH=$(TOP_DIR)/../$(QEMU_DIR)

# Naming convention for Magic Lantern builds:
# General rules:
# - Always specify the camera and its firmware version number in the build name (e.g. 550d.fw109)
# - For non-release builds, specify the build date and author's (nick)name.
# - For experimental builds, add a short keyword indicating the particular feature tested.

# Examples for experimental builds:
# magiclantern-2010dec07.550d.fw108.cropmarks.a1ex.zip 
# magiclantern-2010nov23.550d.fw108.selectable-audio.piers.zip 

# Example for pre-release builds:
# magiclantern-2010dec17.550d.fw109.PRERELEASE.alex.zip

# Release builds:
# magiclantern-0.2.0.rc1.550d.fw109.zip
#~ VERSION=0.2.0.rc1.550d.fw109
BUILDVER=$(shell whoami).$(shell hg id -i -r .)
VERSION = $(call eval_once,VERSION,Nightly.$(shell LC_TIME=EN date +'%Y%b%d').$(MODEL)$(FW_VERSION))

# Build configuration - untested and debug stuff handy for devs
# these can be specified either in Makefile.user, or in the command line:
# 
#   make clean; make CONFIG_QEMU=y

# FIXME: you will need to use "make clean" before recompiling with different options.

CONFIG_PTP          = n
CONFIG_PTP_CHDK     = n
CONFIG_PTP_ML       = n
CONFIG_GDB          = n
CONFIG_GDBSTUB      = n
CONFIG_CONSOLE      = y
CONFIG_DEBUGMSG     = 0
CONFIG_CCACHE       = n
CONFIG_TCC          = y
CONFIG_MODULES      = y
CONFIG_TINYPY       = n

# Work in progress - would be nice to run the unmodified autoexec.bin in QEMU, but we are not there yet
# so, for now, we'll just hack the source code to work around the limitations of the emulator
CONFIG_QEMU         = n
CONFIG_QEMU_MENU_SCREENSHOTS = n

# Work in progress - load ML as position-independent code (PIC)
CONFIG_PIC          = n