pico w support

[f3bandit]

Answer some general questions first
Are you my GitHub sponsor?	no
Did you check older issues to see if it was requested before?	yes
Can we get a build for the pico w that enables the led, as the led is not
tapped to a gpio pin, apparently it's tied to the wifi chipset some how.
I'm not looking for the wifi to be supported yet as I know that will take
time. Just want to use a pico w to be future proof for when that happens
I don't need to unsolder the pico and solder in a pico w, when I can just
solder once and be done. thx

[webhdx]

You can use Pico W with the existing firmware. The LED doesn't serve any meaningful purpose at the moment. It won't be future proof because you'll need to change the wiring with new firmware anyway.

[catb50]

It's a different definition in the code WL_GPIO0 vs GPIO25 plus as mentioned above it doesn't even provide proper visuals. I don't think @webhdx will recompile and re-upload just to change a LED light, but will to allow other fun features to take advantage of the Pico W in the future. Open source is available if you wanted to try and change the definition in the code yourself and recompile.