Export Control is 10x higher than configured.

[Maergsche]

Describe the bug

Hello, I have a Solax Gen3 Hybrid. The Sliders of the Export Control shows 1448w after I configured the parameter over the Solax App to 14480.

The Value is 1/10 .
In the Solax App Values can be set in 20w steps.

Integration Version

2024.05.7

Homeassistant core version

2024.6.1

Inverter brand

Solax X3 Hybrid 8.0-D-E

Plugin used

plugin_solax.py

Serial prefix

H3UE08

Inverter firmware versions

DSP v3.63 ARM v3.53

Connection Method

Default inten

Dongle firmware

None

Detailed Error Log

No response

Additional context

No response

[Codiwr]

Another thread with this issue was closed 2 weeks ago on the assumption it had been solved - but it's still an issue.

[wills106]

This is implemented in 2024.07.0b1

[Xeudoron]

Hi,

I'd like to report same behavior on inverters:

X3-Hybrid-10.0
Firmware: DSP v1.35 ARM v1.34
Hardware: Gen4
SN prefix: H34A10

X3-Hybrid-15.0
Firmware: DSP v1.42 ARM v1.41
Hardware: Gen4
SN prefix: H34A15

Integration version: 2024.05.7
HA Core version: 2024.6.4

When export control is set through solaxcloud to any value, then the HA modbus integration shows 0.1x that value for number.solax_export_control_user_limit

same on the other inverter

[KOPRajs]

I'm having the same issue (export control is scaled by 0.1) with the current 2024.08.8 version.

HA: 2024.8.0
SolaX: 2024.08.8
Model: X3-Ultra 30 kW
Firmware: DSP 80 ARM 14.8
Hardware: Gen5
Serial number: H3BC30JC18xxxx

EDIT:
I've found out that I can solve this by adding H3BC to the EXPORT_LIMIT_SCALE_EXCEPTIONS in plugin_solax.py, however I'm still able to set only 2500 as a maximum export limit.