You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
To limit EEPROM overwriting, I try to use remotecontrol_power_control for the following scenario:
I have a Solax Hybrid Gen4 10kW inverter with 13kWp panels + 3x T58 batteries. I have 9.5kW grid export enabled. So far I have been using automation that if the sky is supposed to be clear, switches at SOC 80% to Feedin Priority and switches back to Self use at late hours when no generation greater than 10kW is expected. In this way I will use maximum PV power, as the inverter produces 11kW AC + a few kW DC to charge the battery. It works very well - however there are 2 writes to the EEPROM every day.
However, if I use remotecontrol_power_control = Enabled Feedin Priority there is a significant reduction in PV power - one string almost does not produce. I have attached screenshots, once with remotecontrol_power_control disabled and once with remotecontrol_power_control = Enabled Feedin Priority.
Translated with DeepL.com (free version)
Integration Version
2024.05.7
Homeassistant core version
2024.6.2
Inverter brand
Solax Power
Plugin used
plugin_solax.py
Serial prefix
H34A10
Inverter firmware versions
DSP: 1.4 ARM: 1.39
Connection Method
Solax Pocket WiFi 3.0
Dongle firmware
V3.010.16
Detailed Error Log
To limit EEPROM overwriting, I try to use remotecontrol_power_control for the following scenario:
I have a Solax Hybrid Gen4 10kW inverter with 13kWp panels + 3x T58 batteries. I have 9.5kW grid export enabled. So far I have been using automation that if the sky is supposed to be clear, switches at SOC 80% to Feedin Priority and switches back to Self use at late hours when no generation greater than 10kW is expected. In this way I will use maximum PV power, as the inverter produces 11kW AC + a few kW DC to charge the battery. It works very well - however there are 2 writes to the EEPROM every day.
However, if I use remotecontrol_power_control = Enabled Feedin Priority there is a significant reduction in PV power - one string almost does not produce. I have attached screenshots, once with remotecontrol_power_control disabled and once with remotecontrol_power_control = Enabled Feedin Priority.
Additional context
No response
The text was updated successfully, but these errors were encountered:
Describe the bug
To limit EEPROM overwriting, I try to use remotecontrol_power_control for the following scenario:
I have a Solax Hybrid Gen4 10kW inverter with 13kWp panels + 3x T58 batteries. I have 9.5kW grid export enabled. So far I have been using automation that if the sky is supposed to be clear, switches at SOC 80% to Feedin Priority and switches back to Self use at late hours when no generation greater than 10kW is expected. In this way I will use maximum PV power, as the inverter produces 11kW AC + a few kW DC to charge the battery. It works very well - however there are 2 writes to the EEPROM every day.
However, if I use remotecontrol_power_control = Enabled Feedin Priority there is a significant reduction in PV power - one string almost does not produce. I have attached screenshots, once with remotecontrol_power_control disabled and once with remotecontrol_power_control = Enabled Feedin Priority.
Translated with DeepL.com (free version)
Integration Version
2024.05.7
Homeassistant core version
2024.6.2
Inverter brand
Solax Power
Plugin used
plugin_solax.py
Serial prefix
H34A10
Inverter firmware versions
DSP: 1.4 ARM: 1.39
Connection Method
Solax Pocket WiFi 3.0
Dongle firmware
V3.010.16
Detailed Error Log
To limit EEPROM overwriting, I try to use remotecontrol_power_control for the following scenario:
I have a Solax Hybrid Gen4 10kW inverter with 13kWp panels + 3x T58 batteries. I have 9.5kW grid export enabled. So far I have been using automation that if the sky is supposed to be clear, switches at SOC 80% to Feedin Priority and switches back to Self use at late hours when no generation greater than 10kW is expected. In this way I will use maximum PV power, as the inverter produces 11kW AC + a few kW DC to charge the battery. It works very well - however there are 2 writes to the EEPROM every day.
However, if I use remotecontrol_power_control = Enabled Feedin Priority there is a significant reduction in PV power - one string almost does not produce. I have attached screenshots, once with remotecontrol_power_control disabled and once with remotecontrol_power_control = Enabled Feedin Priority.
Additional context
No response
The text was updated successfully, but these errors were encountered: