Skip to content

Latest commit

 

History

History
70 lines (39 loc) · 1.73 KB

README.md

File metadata and controls

70 lines (39 loc) · 1.73 KB
Raw

BML-Bluetooth_Module_Library_for_HC06

it's library for HC-06 bluetooth module library, which giva you a chance to configure your bt module.

Begin with library

After adding library to arduino IDE, you must add library to your sketch

#include <BML.h>

Next you must create object. If you want use hardware library it should looks that:

BML bml(Serial)

If you want use software serial you must first add library:

#include <SoftwareSerial.h>

and create object:

SoftwareSerial softS(RXPin, TXPin);

Where RXPin and TXPin are pins which are used to connect bt module. Next you can create the library object.

BML bml(softS);

Available methods

Attention! The methods works only if any bluetooth device isn't connected to bluetooth module.

void waitTime(unsigned int time)

Set default value for time in other methods.

bool convertBaudrate(unsigned long baudRate, unsigned int time);

It available to set baudrate in bt module. In arduino you must do it manualy. You can set consecutive baudrate:

  • 1200bps
  • 2400bps
  • 4800bps
  • 9600bps
  • 19200bps
  • 38400bps
  • 57600bps
  • 115200bps

It return true if get respond, that baudrate was changed.

bool setDeviceName(String deviceName, unsigned int time);

Set device name. Returns true if get respond in set time (you don't have to set it here).

bool setPin(String Pin, unsigned int time);

Set bt PIN. Returns true if get respond in set time (you don't have to set it here).

String deviceVersion(unsigned int time);

Return information about version of bt module.

void reset();

Reset bt module.

bool untilPlug(unsigned int time);

Returns true if get respond.

Until arduino doesn't get respond, that bt module is connected or blow over time, it waits.