Skip to content

Latest commit

 

History

History
199 lines (151 loc) · 6.75 KB

config.md

File metadata and controls

199 lines (151 loc) · 6.75 KB
Raw

Configuration

If you use the scripts provided, sslh will get its configuration from /etc/sslh.cfg. Please refer to example.cfg for an overview of all the settings.

A good scheme is to use the external name of the machine in listen, and bind httpd to localhost:443 (instead of all binding to all interfaces): that way, HTTPS connections coming from inside your network don't need to go through sslh, and sslh is only there as a frontal for connections coming from the internet.

Note that 'external name' in this context refers to the actual IP address of the machine as seen from your network, i.e. that that is not 127.0.0.1 in the output of ifconfig(8).

Libwrap support

Sslh can optionally perform libwrap checks for the sshd service: because the connection to sshd will be coming locally from sslh, sshd cannot determine the IP of the client.

OpenVPN support

OpenVPN clients connecting to OpenVPN running with -port-share reportedly take more than one second between the time the TCP connection is established and the time they send the first data packet. This results in sslh with default settings timing out and assuming an SSH connection. To support OpenVPN connections reliably, it is necessary to increase sslh's timeout to 5 seconds.

Instead of using OpenVPN's port sharing, it is more reliable to use sslh's --openvpn option to get sslh to do the port sharing.

Using proxytunnel with sslh

If you are connecting through a proxy that checks that the outgoing connection really is SSL and rejects SSH, you can encapsulate all your traffic in SSL using proxytunnel (this should work with corkscrew as well). On the server side you receive the traffic with stunnel to decapsulate SSL, then pipe through sslh to switch HTTP on one side and SSL on the other.

In that case, you end up with something like this:

ssh -> proxytunnel -e ----[ssh/ssl]---> stunnel ---[ssh]---> sslh --> sshd
Web browser -------------[http/ssl]---> stunnel ---[http]--> sslh --> httpd

Configuration goes like this on the server side, using stunnel3:

stunnel -f -p mycert.pem  -d thelonious:443 -l /usr/local/sbin/sslh -- \
	sslh -i  --http localhost:80 --ssh localhost:22

  • stunnel options:

    • -f for foreground/debugging
    • -p for specifying the key and certificate
    • -d for specifying which interface and port we're listening to for incoming connections
    • -l summons sslh in inetd mode.

  • sslh options:

    • -i for inetd mode
    • --http to forward HTTP connections to port 80, and SSH connections to port 22.

Capabilities support

On Linux (only?), you can compile sslh with USELIBCAP=1 set in the Makefile to make use of POSIX capabilities; this will save the required capabilities needed for transparent proxying for unprivileged processes.

Alternatively, you may use filesystem capabilities instead of starting sslh as root and asking it to drop privileges. You will need CAP_NET_BIND_SERVICE for listening on port 443 and CAP_NET_RAW for transparent proxying (see capabilities(7)).

You can use the setcap(8) utility to give these capabilities to the executable:

sudo setcap cap_net_bind_service,cap_net_raw+pe sslh-select

Then you can run sslh-select as an unprivileged user, e.g.:

sslh-select -p myname:443 --ssh localhost:22 --tls localhost:443

Transparent proxy support

Transparent proxying is described in its own document.

Systemd Socket Activation

If compiled with USESYSTEMD then it is possible to activate the service on demand and avoid running any code as root.

In this mode any listen configuration options are ignored and the sockets are passed by systemd to the service.

Example socket unit:

[Unit]
Before=sslh.service

[Socket]
ListenStream=1.2.3.4:443
ListenStream=5.6.7.8:444
ListenStream=9.10.11.12:445
FreeBind=true

[Install]
WantedBy=sockets.target

Example service unit:

[Unit]
PartOf=sslh.socket

[Service]
ExecStart=/usr/sbin/sslh -v -f --ssh 127.0.0.1:22 --tls 127.0.0.1:443
KillMode=process
CapabilityBoundingSet=CAP_NET_BIND_SERVICE CAP_NET_RAW
PrivateTmp=true
PrivateDevices=true
ProtectSystem=full
ProtectHome=true
User=sslh

With this setup only the socket needs to be enabled. The sslh service will be started on demand and does not need to run as root to bind the sockets as systemd has already bound and passed them over. If the sslh service is started on its own without the sockets being passed by systemd then it will look to use those defined on the command line or config file as usual. Any number of ListenStreams can be defined in the socket file and systemd will pass them all over to sslh to use as usual.

To avoid inconsistency between starting via socket and starting directly via the service Requires=sslh.socket can be added to the service unit to mandate the use of the socket configuration.

Rather than overwriting the entire socket file drop in values can be placed in /etc/systemd/system/sslh.socket.d/.conf with additional ListenStream values that will be merged.

In addition to the above with manual .socket file configuration there is an optional systemd generator which can be compiled - systemd-sslh-generator

This parses the /etc/sslh.cfg (or /etc/sslh/sslh.cfg file if that exists instead) configuration file and dynamically generates a socket file to use.

This will also merge with any sslh.socket.d drop in configuration but will be overridden by a /etc/systemd/system/sslh.socket file.

To use the generator place it in /usr/lib/systemd/system-generators and then call systemctl daemon-reload after any changes to /etc/sslh.cfg to generate the new dynamic socket unit.

Fail2ban

If using transparent proxying, just use the standard ssh rules. If you can't or don't want to use transparent proxying, you can set fail2ban rules to block repeated ssh connections from an IP address (obviously this depends on the site, there might be legitimate reasons you would get many connections to ssh from the same IP address...)

See example files in scripts/fail2ban.

UDP

sslh can perform demultiplexing on UDP packets as well. This does not work with sslh-fork (it is not possible to support UDP with a forking model). Specify a listening address and target protocols with is_udp: true. sslh will wait for incoming UDP packets, run the probes in the usual fashion, and forward packets to the appropriate target. sslh will then remember the association between remote host to target server for 60 seconds by default, which can be overridden with udp_timeout. This allows to process both single-datagram protocols such as DNS, and connection-based protocols such as QUIC.

An example for supporting QUIC is shown in example.cfg.