Skip to content

0ff/esptool

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

16 Commits
 
 
 
 
 
 

Repository files navigation

esptool

A cute Python utility to communicate with the ROM bootloader in Espressif ESP8266. It is intended to be a simple, platform independent, open source replacement for XTCOM.

This is a work in progress; it is usable but expect some rough edges.

Usage

This utility actually have a user interface! It uses Argparse and is rather self-documenting. Try running esptool -h. Or hack the script to your hearts content.

Examples

The probably most useful command; writing an application to flash:

./esptool.py write_flash 0x000000 wi07c.rom

Creating an application image:

./esptool.py make_image -f app.text.bin -a 0x40100000 -f app.data.bin -a 0x3ffe8000 -f app.rodata.bin -a 0x3ffe8c00 app.flash.bin

Dumping the ROM:

./esptool.py dump_mem 0x40000000 65536 iram0.bin

Protocol

If GPIO0 and GPIO15 is pulled down and GPIO2 is pulled high when the module leaves reset, then the bootloader will enter the UART download mode. It communicates over 115200 8N1.

The bootloader protocol uses SLIP framing. Each packet begin and end with 0xC0, all occurrences of 0xC0 and 0xDB inside the packet are replaced with 0xDB 0xDC and 0xDB 0xDD, respectively.

Inside the frame, the packet consists of a header and a variable-length body. All multi-byte fields are little-endian.

Request

Byte Name Comment
0 Direction Always 0x00 for requests
1 Command Requested operation, according to separate table
2-3 Size Size of body
4-7 Checksum XOR checksum of payload, only used in block transfer packets
8..n Body Depends on operation

Response

Byte Name Comment
0 Direction Always 0x01 for responses
1 Command Same value as in the request packet that trigged the response
2-3 Size Size of body
4-7 Value Response data for some operations
8..n Body Depends on operation

Opcodes

Byte Name Input Output
0x02 Flash Download Start total size, 0x200, block size, offset
0x03 Flash Download Data size, sequence number, data. checksum in dedicated field.
0x04 Flash Download Finish reboot flag?
0x05 RAM Download Start total size, packet size, number of packets, memory offset
0x06 RAM Download Finish execute flag, entry point
0x07 RAM Download Data size, sequence numer, data. checksum in dedicated field.
0x08 Sync Frame 0x07 0x07 0x12 0x20, 0x55 32 times
0x09 Write register Four 32-bit words: address, value, mask and delay (in microseconds) Body is 0x00 0x00 if successful
0x0a Read register Address as 32-bit word Read data as 32-bit word in value field

Checksum

Each byte in the payload is XOR'ed together, as well as the magic number 0xEF. The result is stored as a zero-padded byte in the 32-bit checksum field in the header.

Firmware image format

The firmware file consists of a header, a variable number of data segments and a footer. Multi-byte fields are little-endian.

File header

Byte Description
0 Always 0xE9
1 Number of segments
2-3 Padding/unused
4-7 Entry point
8-n Segments

Segment

Byte Description
0-3 Memory offset
4-7 Segment size
8...n Data

Footer

The file is padded with zeros until its size is one byte less than a multiple of 16 bytes. A last byte (thus making the file size a multiple of 16) is the checksum of the data of all segments. The checksum is defined as the xor-sum of all bytes and the byte 0xEF.

Boot log

The boot rom writes a log to the UART when booting. The timing is a little bit unusual: 75000 baud (at least on my modules, when doing a cold boot)

ets Jan  8 2014,rst cause 1, boot mode:(3,7)

load 0x40100000, len 24236, room 16 
tail 12
chksum 0xb7
ho 0 tail 12 room 4
load 0x3ffe8000, len 3008, room 12 
tail 4
chksum 0x2c
load 0x3ffe8bc0, len 4816, room 4
tail 12
chksum 0x46
csum 0x46

About

This information is collected through research by Fredrik Ahlberg. Feel free to contact me on GitHub or through fredrik at z80 dot se.

This document and the attached source code is released under GPLv2.

About

ESP8266 ROM Bootloader utility

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published