Merge pull request #3977 from LordMike/feature/aht10_usermod

Add a usermod for AHT10, AHT15 and AHT20 temperature/humidity sensors

.gitignore

@@ -21,4 +21,4 @@ wled-update.sh
 /wled00/my_config.h
 /wled00/Release
 /wled00/wled00.ino.cpp
-/wled00/html_*.h
+/wled00/html_*.h

platformio_override.sample.ini

@@ -94,6 +94,9 @@ build_flags = ${common.build_flags} ${esp8266.build_flags}
 ;   -D USERMOD_AUTO_SAVE
 ;   -D AUTOSAVE_AFTER_SEC=90
 ;
+; Use AHT10/AHT15/AHT20 usermod
+;   -D USERMOD_AHT10
+;
 ; Use INA226 usermod
 ;   -D USERMOD_INA226
 ;

usermods/AHT10_v2/README.md

@@ -0,0 +1,36 @@
+# Usermod AHT10
+This Usermod is designed to read a `AHT10`, `AHT15` or `AHT20` sensor and output the following:
+- Temperature
+- Humidity
+
+Configuration is performed via the Usermod menu. The following settings can be configured in the Usermod Menu:
+- I2CAddress: The i2c address in decimal. Set it to either 56 (0x38, the default) or 57 (0x39).
+- SensorType, one of:
+  - 0 - AHT10
+  - 1 - AHT15
+  - 2 - AHT20
+- CheckInterval: Number of seconds between readings
+- Decimals: Number of decimals to put in the output
+
+Dependencies, These must be added under `lib_deps` in your `platform.ini` (or `platform_override.ini`).
+- Libraries
+  - `enjoyneering/AHT10@~1.1.0` (by [enjoyneering](https://registry.platformio.org/libraries/enjoyneering/AHT10))
+  - `Wire`
+
+## Author
+[@LordMike](https://github.com/LordMike)
+
+# Compiling
+
+To enable, compile with `USERMOD_AHT10` defined  (e.g. in `platformio_override.ini`)
+```ini
+[env:aht10_example]
+extends = env:esp32dev
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_AHT10
+  ; -D USERMOD_AHT10_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  enjoyneering/AHT10@~1.1.0
+```

usermods/AHT10_v2/platformio_override.ini

@@ -0,0 +1,9 @@
+[env:aht10_example]
+extends = env:esp32dev
+build_flags =
+  ${common.build_flags} ${esp32.build_flags}
+  -D USERMOD_AHT10
+  ; -D USERMOD_AHT10_DEBUG ; -- add a debug status to the info modal
+lib_deps = 
+  ${esp32.lib_deps}
+  enjoyneering/AHT10@~1.1.0

usermods/AHT10_v2/usermod_aht10.h

@@ -0,0 +1,327 @@
+#pragma once
+
+#include "wled.h"
+#include <AHT10.h>
+
+#define AHT10_SUCCESS 1
+
+class UsermodAHT10 : public Usermod
+{
+private:
+  static const char _name[];
+
+  unsigned long _lastLoopCheck = 0;
+
+  bool _settingEnabled : 1;    // Enable the usermod
+  bool _mqttPublish : 1;       // Publish mqtt values
+  bool _mqttPublishAlways : 1; // Publish always, regardless if there is a change
+  bool _mqttHomeAssistant : 1; // Enable Home Assistant docs
+  bool _initDone : 1;          // Initialization is done
+
+  // Settings. Some of these are stored in a different format than they're user settings - so we don't have to convert at runtime
+  uint8_t _i2cAddress = AHT10_ADDRESS_0X38;
+  ASAIR_I2C_SENSOR _ahtType = AHT10_SENSOR;
+  uint16_t _checkInterval = 60000; // milliseconds, user settings is in seconds
+  float _decimalFactor = 100;      // a power of 10 factor. 1 would be no change, 10 is one decimal, 100 is two etc. User sees a power of 10 (0, 1, 2, ..)
+
+  uint8_t _lastStatus = 0;
+  float _lastHumidity = 0;
+  float _lastTemperature = 0;
+
+#ifndef WLED_MQTT_DISABLE
+  float _lastHumiditySent = 0;
+  float _lastTemperatureSent = 0;
+#endif
+
+  AHT10 *_aht = nullptr;
+
+  float truncateDecimals(float val)
+  {
+    return roundf(val * _decimalFactor) / _decimalFactor;
+  }
+
+  void initializeAht()
+  {
+    if (_aht != nullptr)
+    {
+      delete _aht;
+    }
+
+    _aht = new AHT10(_i2cAddress, _ahtType);
+
+    _lastStatus = 0;
+    _lastHumidity = 0;
+    _lastTemperature = 0;
+  }
+
+  ~UsermodAHT10()
+  {
+    delete _aht;
+    _aht = nullptr;
+  }
+
+#ifndef WLED_DISABLE_MQTT
+  void mqttInitialize()
+  {
+    // This is a generic "setup mqtt" function, So we must abort if we're not to do mqtt
+    if (!WLED_MQTT_CONNECTED || !_mqttPublish || !_mqttHomeAssistant)
+      return;
+
+    char topic[128];
+    snprintf_P(topic, 127, "%s/temperature", mqttDeviceTopic);
+    mqttCreateHassSensor(F("Temperature"), topic, F("temperature"), F("°C"));
+
+    snprintf_P(topic, 127, "%s/humidity", mqttDeviceTopic);
+    mqttCreateHassSensor(F("Humidity"), topic, F("humidity"), F("%"));
+  }
+
+  void mqttPublishIfChanged(const __FlashStringHelper *topic, float &lastState, float state, float minChange)
+  {
+    // Check if MQTT Connected, otherwise it will crash the 8266
+    // Only report if the change is larger than the required diff
+    if (WLED_MQTT_CONNECTED && _mqttPublish && (_mqttPublishAlways || fabsf(lastState - state) > minChange))
+    {
+      char subuf[128];
+      snprintf_P(subuf, 127, PSTR("%s/%s"), mqttDeviceTopic, (const char *)topic);
+      mqtt->publish(subuf, 0, false, String(state).c_str());
+
+      lastState = state;
+    }
+  }
+
+  // Create an MQTT Sensor for Home Assistant Discovery purposes, this includes a pointer to the topic that is published to in the Loop.
+  void mqttCreateHassSensor(const String &name, const String &topic, const String &deviceClass, const String &unitOfMeasurement)
+  {
+    String t = String(F("homeassistant/sensor/")) + mqttClientID + "/" + name + F("/config");
+
+    StaticJsonDocument<600> doc;
+
+    doc[F("name")] = name;
+    doc[F("state_topic")] = topic;
+    doc[F("unique_id")] = String(mqttClientID) + name;
+    if (unitOfMeasurement != "")
+      doc[F("unit_of_measurement")] = unitOfMeasurement;
+    if (deviceClass != "")
+      doc[F("device_class")] = deviceClass;
+    doc[F("expire_after")] = 1800;
+
+    JsonObject device = doc.createNestedObject(F("device")); // attach the sensor to the same device
+    device[F("name")] = serverDescription;
+    device[F("identifiers")] = "wled-sensor-" + String(mqttClientID);
+    device[F("manufacturer")] = F(WLED_BRAND);
+    device[F("model")] = F(WLED_PRODUCT_NAME);
+    device[F("sw_version")] = versionString;
+
+    String temp;
+    serializeJson(doc, temp);
+    DEBUG_PRINTLN(t);
+    DEBUG_PRINTLN(temp);
+
+    mqtt->publish(t.c_str(), 0, true, temp.c_str());
+  }
+#endif
+
+public:
+  void setup()
+  {
+    initializeAht();
+  }
+
+  void loop()
+  {
+    // if usermod is disabled or called during strip updating just exit
+    // NOTE: on very long strips strip.isUpdating() may always return true so update accordingly
+    if (!_settingEnabled || strip.isUpdating())
+      return;
+
+    // do your magic here
+    unsigned long currentTime = millis();
+
+    if (currentTime - _lastLoopCheck < _checkInterval)
+      return;
+    _lastLoopCheck = currentTime;
+
+    _lastStatus = _aht->readRawData();
+
+    if (_lastStatus == AHT10_ERROR)
+    {
+      // Perform softReset and retry
+      DEBUG_PRINTLN(F("AHTxx returned error, doing softReset"));
+      if (!_aht->softReset())
+      {
+        DEBUG_PRINTLN(F("softReset failed"));
+        return;
+      }
+
+      _lastStatus = _aht->readRawData();
+    }
+
+    if (_lastStatus == AHT10_SUCCESS)
+    {
+      float temperature = truncateDecimals(_aht->readTemperature(AHT10_USE_READ_DATA));
+      float humidity = truncateDecimals(_aht->readHumidity(AHT10_USE_READ_DATA));
+
+#ifndef WLED_DISABLE_MQTT
+      // Push to MQTT
+
+      // We can avoid reporting if the change is insignificant. The threshold chosen is below the level of accuracy, but way above 0.01 which is the precision of the value provided.
+      // The AHT10/15/20 has an accuracy of 0.3C in the temperature readings
+      mqttPublishIfChanged(F("temperature"), _lastTemperatureSent, temperature, 0.1f);
+
+      // The AHT10/15/20 has an accuracy in the humidity sensor of 2%
+      mqttPublishIfChanged(F("humidity"), _lastHumiditySent, humidity, 0.5f);
+#endif
+
+      // Store
+      _lastTemperature = temperature;
+      _lastHumidity = humidity;
+    }
+  }
+
+#ifndef WLED_DISABLE_MQTT
+  void onMqttConnect(bool sessionPresent)
+  {
+    mqttInitialize();
+  }
+#endif
+
+  uint16_t getId()
+  {
+    return USERMOD_ID_AHT10;
+  }
+
+  void addToJsonInfo(JsonObject &root) override
+  {
+    // if "u" object does not exist yet wee need to create it
+    JsonObject user = root["u"];
+    if (user.isNull())
+      user = root.createNestedObject("u");
+
+#ifdef USERMOD_AHT10_DEBUG
+    JsonArray temp = user.createNestedArray(F("AHT last loop"));
+    temp.add(_lastLoopCheck);
+
+    temp = user.createNestedArray(F("AHT last status"));
+    temp.add(_lastStatus);
+#endif
+
+    JsonArray jsonTemp = user.createNestedArray(F("Temperature"));
+    JsonArray jsonHumidity = user.createNestedArray(F("Humidity"));
+
+    if (_lastLoopCheck == 0)
+    {
+      // Before first run
+      jsonTemp.add(F("Not read yet"));
+      jsonHumidity.add(F("Not read yet"));
+      return;
+    }
+
+    if (_lastStatus != AHT10_SUCCESS)
+    {
+      jsonTemp.add(F("An error occurred"));
+      jsonHumidity.add(F("An error occurred"));
+      return;
+    }
+
+    jsonTemp.add(_lastTemperature);
+    jsonTemp.add(F("°C"));
+
+    jsonHumidity.add(_lastHumidity);
+    jsonHumidity.add(F("%"));
+  }
+
+  void addToConfig(JsonObject &root)
+  {
+    JsonObject top = root.createNestedObject(FPSTR(_name));
+    top[F("Enabled")] = _settingEnabled;
+    top[F("I2CAddress")] = static_cast<uint8_t>(_i2cAddress);
+    top[F("SensorType")] = _ahtType;
+    top[F("CheckInterval")] = _checkInterval / 1000;
+    top[F("Decimals")] = log10f(_decimalFactor);
+#ifndef WLED_DISABLE_MQTT
+    top[F("MqttPublish")] = _mqttPublish;
+    top[F("MqttPublishAlways")] = _mqttPublishAlways;
+    top[F("MqttHomeAssistantDiscovery")] = _mqttHomeAssistant;
+#endif
+
+    DEBUG_PRINTLN(F("AHT10 config saved."));
+  }
+
+  bool readFromConfig(JsonObject &root) override
+  {
+    // default settings values could be set here (or below using the 3-argument getJsonValue()) instead of in the class definition or constructor
+    // setting them inside readFromConfig() is slightly more robust, handling the rare but plausible use case of single value being missing after boot (e.g. if the cfg.json was manually edited and a value was removed)
+
+    JsonObject top = root[FPSTR(_name)];
+
+    bool configComplete = !top.isNull();
+    if (!configComplete)
+      return false;
+
+    bool tmpBool = false;
+    configComplete &= getJsonValue(top[F("Enabled")], tmpBool);
+    if (configComplete)
+      _settingEnabled = tmpBool;
+
+    configComplete &= getJsonValue(top[F("I2CAddress")], _i2cAddress);
+    configComplete &= getJsonValue(top[F("CheckInterval")], _checkInterval);
+    if (configComplete)
+    {
+      if (1 <= _checkInterval && _checkInterval <= 600)
+        _checkInterval *= 1000;
+      else
+        // Invalid input
+        _checkInterval = 60000;
+    }
+
+    configComplete &= getJsonValue(top[F("Decimals")], _decimalFactor);
+    if (configComplete)
+    {
+      if (0 <= _decimalFactor && _decimalFactor <= 5)
+        _decimalFactor = pow10f(_decimalFactor);
+      else
+        // Invalid input
+        _decimalFactor = 100;
+    }
+
+    uint8_t tmpAhtType;
+    configComplete &= getJsonValue(top[F("SensorType")], tmpAhtType);
+    if (configComplete)
+    {
+      if (0 <= tmpAhtType && tmpAhtType <= 2)
+        _ahtType = static_cast<ASAIR_I2C_SENSOR>(tmpAhtType);
+      else
+        // Invalid input
+        _ahtType = ASAIR_I2C_SENSOR::AHT10_SENSOR;
+    }
+
+#ifndef WLED_DISABLE_MQTT
+    configComplete &= getJsonValue(top[F("MqttPublish")], tmpBool);
+    if (configComplete)
+      _mqttPublish = tmpBool;
+
+    configComplete &= getJsonValue(top[F("MqttPublishAlways")], tmpBool);
+    if (configComplete)
+      _mqttPublishAlways = tmpBool;
+
+    configComplete &= getJsonValue(top[F("MqttHomeAssistantDiscovery")], tmpBool);
+    if (configComplete)
+      _mqttHomeAssistant = tmpBool;
+#endif
+
+    if (_initDone)
+    {
+      // Reloading config
+      initializeAht();
+
+#ifndef WLED_DISABLE_MQTT
+      mqttInitialize();
+#endif
+    }
+
+    _initDone = true;
+    return configComplete;
+  }
+};
+
+const char UsermodAHT10::_name[] PROGMEM = "AHTxx";