Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Update Battery usermod documentation #3968

Merged
merged 2 commits into from
May 21, 2024
Merged

Update Battery usermod documentation #3968

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
2 commits
Select commit Hold shift + click to select a range
6b8d8bf
Update Battery usermod documentation
adamsthws May 11, 2024
19ccff9
Merge branch '0_15' into 0_15_battery_usermod_readme
adamsthws May 15, 2024
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
Binary file added usermods/Battery/assets/battery_connection_schematic_esp32.png
View file
Open in desktop
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
Binary file added usermods/Battery/assets/battery_connection_schematic_esp32_v2.png
View file
Open in desktop
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
Binary file added usermods/Battery/assets/installation_my_config_h.png
View file
Open in desktop
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
Binary file added usermods/Battery/assets/installation_platformio_override_ini.png
View file
Open in desktop
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
155 changes: 100 additions & 55 deletions usermods/Battery/readme.md
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -6,121 +6,166 @@

Enables battery level monitoring of your project.

For this to work, the positive side of the (18650) battery must be connected to pin `A0` of the d1 mini/esp8266 with a 100k Ohm resistor (see [Useful Links](#useful-links)).

If you have an ESP32 board, connect the positive side of the battery to ADC1 (GPIO32 - GPIO39)

<p align="center">
<img width="500" src="assets/battery_info_screen.png">
<p align="left">
<img width="700" src="assets/battery_info_screen.png">
</p>

<br>

## ⚙️ Features

- 💯 Displays current battery voltage
- 💯 Displays current battery voltage
- 🚥 Displays battery level
- 🚫 Auto-off with configurable Threshold
- 🚫 Auto-off with configurable threshold
- 🚨 Low power indicator with many configuration possibilities

<br><br>

## 🎈 Installation

define `USERMOD_BATTERY` in `wled00/my_config.h`
| **Option 1** | **Option 2** |
|--------------|--------------|
| In `wled00/my_config.h`<br>Add the line: `#define USERMOD_BATTERY`<br><br>[Example: my_config.h](assets/installation_my_config_h.png) | In `platformio_override.ini` (or `platformio.ini`)<br>Under: `build_flags =`, add the line: `-D USERMOD_BATTERY`<br><br>[Example: platformio_override.ini](assets/installation_platformio_override_ini.png) |

### Example wiring
<br><br>

<p align="center">
<img width="300" src="assets/battery_connection_schematic_01.png">
</p>
## 🔌 Example wiring

- (see [Useful Links](#useful-links)).

<table style="width: 100%; table-layout: fixed;">
<tr>
<!-- Column for the first image -->
<td style="width: 50%; vertical-align: bottom;">
<img width="300" src="assets/battery_connection_schematic_01.png" style="display: block;">
<p><strong>ESP8266</strong><br>
With a 100k Ohm resistor, connect the positive<br>
side of the battery to pin `A0`.</p>
</td>
<!-- Column for the second image -->
<td style="width: 50%; vertical-align: bottom;">
<img width="250" src="assets/battery_connection_schematic_esp32.png" style="display: block;">
<p><strong>ESP32</strong> (+S2, S3, C3 etc...)<br>
Use a voltage divider (two resistors of equal value).<br>
Connect to ADC1 (GPIO32 - GPIO39). GPIO35 is Default.</p>
</td>
</tr>
</table>

### Define Your Options
<br><br>

## Define Your Options

| Name | Unit | Description |
| ----------------------------------------------- | ----------- |-------------------------------------------------------------------------------------- |
| `USERMOD_BATTERY` | | define this (in `my_config.h`) to have this usermod included wled00\usermods_list.cpp |
| `USERMOD_BATTERY_MEASUREMENT_PIN` | | defaults to A0 on ESP8266 and GPIO35 on ESP32 |
| `USERMOD_BATTERY_INITIAL_DELAY` | ms | delay before initial reading. defaults to 10 seconds to allow voltage stabilization
| `USERMOD_BATTERY_MEASUREMENT_INTERVAL` | ms | battery check interval. defaults to 30 seconds |
| `USERMOD_BATTERY_{TYPE}_MIN_VOLTAGE` | v | minimum battery voltage. default is 2.6 (18650 battery standard) |
| `USERMOD_BATTERY_{TYPE}_MAX_VOLTAGE` | v | maximum battery voltage. default is 4.2 (18650 battery standard) |
| `USERMOD_BATTERY_{TYPE}_TOTAL_CAPACITY` | mAh | the capacity of all cells in parallel summed up |
| `USERMOD_BATTERY_{TYPE}_CALIBRATION` | | offset / calibration number, fine tune the measured voltage by the microcontroller |
| `USERMOD_BATTERY` | | Define this (in `my_config.h`) to have this usermod included wled00\usermods_list.cpp |
| `USERMOD_BATTERY_MEASUREMENT_PIN` | | Defaults to A0 on ESP8266 and GPIO35 on ESP32 |
| `USERMOD_BATTERY_MEASUREMENT_INTERVAL` | ms | Battery check interval. defaults to 30 seconds |
| `USERMOD_BATTERY_INITIAL_DELAY` | ms | Delay before initial reading. defaults to 10 seconds to allow voltage stabilization |
| `USERMOD_BATTERY_{TYPE}_MIN_VOLTAGE` | v | Minimum battery voltage. default is 2.6 (18650 battery standard) |
| `USERMOD_BATTERY_{TYPE}_MAX_VOLTAGE` | v | Maximum battery voltage. default is 4.2 (18650 battery standard) |
| `USERMOD_BATTERY_{TYPE}_TOTAL_CAPACITY` | mAh | The capacity of all cells in parallel summed up |
| `USERMOD_BATTERY_{TYPE}_CALIBRATION` | | Offset / calibration number, fine tune the measured voltage by the microcontroller |
| Auto-Off | --- | --- |
| `USERMOD_BATTERY_AUTO_OFF_ENABLED` | true/false | enables auto-off |
| `USERMOD_BATTERY_AUTO_OFF_THRESHOLD` | % (0-100) | when this threshold is reached master power turns off |
| `USERMOD_BATTERY_AUTO_OFF_ENABLED` | true/false | Enables auto-off |
| `USERMOD_BATTERY_AUTO_OFF_THRESHOLD` | % (0-100) | When this threshold is reached master power turns off |
| Low-Power-Indicator | --- | --- |
| `USERMOD_BATTERY_LOW_POWER_INDICATOR_ENABLED` | true/false | enables low power indication |
| `USERMOD_BATTERY_LOW_POWER_INDICATOR_PRESET` | preset id | when low power is detected then use this preset to indicate low power |
| `USERMOD_BATTERY_LOW_POWER_INDICATOR_THRESHOLD` | % (0-100) | when this threshold is reached low power gets indicated |
| `USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION` | seconds | for this long the configured preset is played |
| `USERMOD_BATTERY_LOW_POWER_INDICATOR_ENABLED` | true/false | Enables low power indication |
| `USERMOD_BATTERY_LOW_POWER_INDICATOR_PRESET` | preset id | When low power is detected then use this preset to indicate low power |
| `USERMOD_BATTERY_LOW_POWER_INDICATOR_THRESHOLD` | % (0-100) | When this threshold is reached low power gets indicated |
| `USERMOD_BATTERY_LOW_POWER_INDICATOR_DURATION` | seconds | For this long the configured preset is played |

All parameters can be configured at runtime via the Usermods settings page.

<br>

**NOTICE:** Each Battery type can be pre-configured individualy (in `my_config.h`)

| Name | Alias | `my_config.h` example |
| --------------- | ------------- | ------------------------------------- |
| Lithium Polymer | lipo (Li-Po) | `USERMOD_BATTERY_lipo_MIN_VOLTAGE` |
| Lithium Ionen | lion (Li-Ion) | `USERMOD_BATTERY_lion_TOTAL_CAPACITY` |

<br><br>

## 🔧 Calibration

The calibration number is a value that is added to the final computed voltage after it has been scaled by the voltage multiplier.

It fine-tunes the voltage reading so that it more closely matches the actual battery voltage, compensating for inaccuracies inherent in the voltage divider resistors or the ESP's ADC measurements.

Set calibration either in the Usermods settings page or at compile time in `my_config.h` or `platformio_override.ini`.

It can be either a positive or negative number.

<br><br>

## ⚠️ Important

- Make sure you know your battery specifications! All batteries are **NOT** the same!
- Example:
Make sure you know your battery specifications! All batteries are **NOT** the same!

Example:

| Your battery specification table | | Options you can define |
| :-------------------------------- |:--------------- | :---------------------------- |
| Capacity | 3500mAh 12,5 Wh | |
| Minimum capacity | 3350mAh 11,9 Wh | |
| Your battery specification table | | Options you can define |
| --------------------------------- | --------------- | ----------------------------- |
| Capacity | 3500mAh 12.5Wh | |
| Minimum capacity | 3350mAh 11.9Wh | |
| Rated voltage | 3.6V - 3.7V | |
| **Charging end voltage** | **4,2V ± 0,05** | `USERMOD_BATTERY_MAX_VOLTAGE` |
| **Discharge voltage** | **2,5V** | `USERMOD_BATTERY_MIN_VOLTAGE` |
| **Charging end voltage** | **4.2V ± 0.05** | `USERMOD_BATTERY_MAX_VOLTAGE` |
| **Discharge voltage** | **2.5V** | `USERMOD_BATTERY_MIN_VOLTAGE` |
| Max. discharge current (constant) | 10A (10000mA) | |
| max. charging current | 1.7A (1700mA) | |
| ... | ... | ... |
| .. | .. | .. |

Specification from: [Molicel INR18650-M35A, 3500mAh 10A Lithium-ion battery, 3.6V - 3.7V](https://www.akkuteile.de/lithium-ionen-akkus/18650/molicel/molicel-inr18650-m35a-3500mah-10a-lithium-ionen-akku-3-6v-3-7v_100833)
Specification from: [Molicel INR18650-M35A, 3500mAh 10A Lithium-ion battery, 3.6V - 3.7V](https://www.akkuteile.de/lithium-ionen-akkus/18650/molicel/molicel-inr18650-m35a-3500mah-10a-lithium-ionen-akku-3-6v-3-7v_100833)

<br><br>

## 🌐 Useful Links

- https://lazyzero.de/elektronik/esp8266/wemos_d1_mini_a0/start
- https://arduinodiy.wordpress.com/2016/12/25/monitoring-lipo-battery-voltage-with-wemos-d1-minibattery-shield-and-thingspeak/

<br><br>

## 📝 Change Log

2024-04-30
2024-05-11

- improved initial reading accuracy by delaying initial measurement to allow voltage to stabilize at power-on
- Documentation updated

2024-04-30

- integrate factory pattern to make it easier to add other / custom battery types
- update readme
- Integrate factory pattern to make it easier to add other / custom battery types
- Update readme
- Improved initial reading accuracy by delaying initial measurement to allow voltage to stabilize at power-on

2023-01-04

- basic support for LiPo rechargeable batteries ( `-D USERMOD_BATTERY_USE_LIPO`)
- improved support for esp32 (read calibrated voltage)
- corrected config saving (measurement pin, and battery min/max were lost)
- various bugfixes
- Basic support for LiPo rechargeable batteries (`-D USERMOD_BATTERY_USE_LIPO`)
- Improved support for ESP32 (read calibrated voltage)
- Corrected config saving (measurement pin, and battery min/max were lost)
- Various bugfixes

2022-12-25

- added "auto-off" feature
- added "low-power-indication" feature
- added "calibration/offset" field to configuration page
- added getter and setter, so that user usermods could interact with this one
- update readme (added new options, made it markdownlint compliant)
- Added "auto-off" feature
- Added "low-power-indication" feature
- Added "calibration/offset" field to configuration page
- Added getter and setter, so that user usermods could interact with this one
- Update readme (added new options, made it markdownlint compliant)

2021-09-02

- added "Battery voltage" to info
- added circuit diagram to readme
- added MQTT support, sending battery voltage
- minor fixes
- Added "Battery voltage" to info
- Added circuit diagram to readme
- Added MQTT support, sending battery voltage
- Minor fixes

2021-08-15

- changed `USERMOD_BATTERY_MIN_VOLTAGE` to 2.6 volt as default for 18650 batteries
- Changed `USERMOD_BATTERY_MIN_VOLTAGE` to 2.6 volt as default for 18650 batteries
- Updated readme, added specification table

2021-08-10
Expand Down