Settings

---

Settings

Setting	Default	Info
version		Version number, i.e. v1.0. Can only be changed in the source code.
ssid	DeautherX	SSID of access point used for the web interface (if enabled). The length must be between 1 and 31 characters.
password	BlackTechX	Password of access point used for the web interface (if enabled). The length must be between 8 and 31 characters.
channel	1	Default WiFi channel used when starting.
hidden	false	Hides the access point used for the web interface.
captivePortal	true	Enables captive portal for access point (if enabled).
lang	en	Default language for the web interface. Be sure the language file exists!
autosave	true	Enables automatic saving of SSIDs, device names, and settings.
autosaveTime	30000	Time interval for automatic saving in milliseconds.
displayInterface	false	Enables display interface.
displayTimeout	600	Time in seconds, after which the display turns off when inactive. To disable the timeout, set it to 0.
serialInterface	true	Enables serial interface.
serialEcho	true	Enables echo for each incoming message over serial.
webInterface	false	Enables web interface.
webSpiffs	false	Enables SPIFFS for all web files. Makes uploading new web files easier, at the cost of longer loading times.
ledEnabled	true	Enables the (RGB) LED feature.
maxCh	13	Max channel to scan on. US = 11, EU = 13, Japan = 14.
macAP		Mac address used for the access point mode. Set a random mac address with set macap random.
macSt		Mac address used for the station mode. Set a random mac address with set macst random.
chTime	384	Time for scanning one channel before going to the next in milliseconds (only if channel hopping is enabled).
minDeauths	3	Minimum number of deauthentication frames when scanning to change the LED to deauth mode.
attackTimeout	600	Amount of time (in seconds), after which the attack will stop automatically. Set it to 0 to disable it.
forcePackets	1	How many attempts to send out a packet. Set this value higher to achieve a better packet rate in a busy area. This setting could make the device slower or more unstable. Max value is 255.
deauthsPerTarget	10	Amount of deauthentication and disassociation frames sent per target.
deauthReason	1	The reason code sent in the deauth frames. Tells the target device why the connection will be closed.
beaconChannel	false	Sends all beacon and probe frames on different channels.
beaconInterval	false	Send beacon frame each second (true). Or send them each 100ms (false). A longer interval means more stability and less spamming of packets, but it could take longer until clients see them.
randomTX	false	Enables randomized transmission power for sending out beacon and probe request frames.
probesPerSSID	1	How many probe requests send per SSID.

Changing Settings (Web Interface)

1. Connect to the WiFi network DeautherXwith password BlackTechX
2. Open 192.168.4.1 in a browser
3. Navigate to Settings (navbar on the right)
4. Adjust the settings to your preference
5. Click save (on the left, above the list)

Changing Settings (Serial)

1. Open a Serial Terminal of your choice
2. Connect your Deauther/ESP8266 Board (115200baud, \n)
3. To view your current settings type get settings
4. To change a setting, use the set command. For example: set password "my new cool pswd"
5. To save your settings type save

---