Zaytuna is a very simple, lightweight 3D simulator for a mini autonomous self-driving car that is programmable with ROS.
The simulator is meant to be used for educational purposes only!
❗ Note: Not suitable for virtual machine. You'll not be able to run it in Virtualbox or on a guest operating system. And if you've ever got it to run on a guest OS, the scene won't render properly, and therefore will not be suitable to drive with vision. For a simulator you usually need an actual graphic card, and not emulated one.
Here is a rushed walkthrough video! Alternatively, you can also watch it in slow motion on YouTube here.
Zaytuna.mp4
For any bug reports or suggestions, please use the above Issues
/Discussions
dialogs.
Requirements: ROS. "No support for ROS2 yet!"
If you haven't yet, you need to install a ROS version that is supported on your operating system. And make sure that ROS environment variables are setup properly.
Building the package: If you know how to build a ROS package, you probably don't need to read the rest. Otherwise, it's more convenient to go through these tutorials first.
To build the package open a terminal and navigate to src
folder in your catkin workspace, assuming your catkin workspace is named catkin_ws
, then run the following commands:
:~/catkin_ws/src$ git clone https://github.com/ChevronOne/zaytuna.git
:~/catkin_ws/src$ cd ..
:~/catkin_ws$ catkin_make
or:~/catkin_ws$ catkin build
depending on which command you've used when you first build your catkin workspace
If the build was successful, open a second terminal and run the command roscore
, and in the current terminal run the command rosrun zaytuna zay_simu
. And there you have it!
By default, there should be a model vehicle with some obstacles. However, you can delete or add up to 10 model vehicles and up to 5000 obstacles as needed.
To see the topics of the simulated model vehicle, open a third terminal and run the command rostopic list
. Currently there is no documentation or tutorials of how to use them, but if you're familiar with ROS, then most of them should be self-explanatory.
To navigate in the scene use W
, S
, A
, D
, Up
, Down
, Right
and Left
keys. And for orientation use mouse pointer. If a model vehicle is connected to control panel with Key-Controller chosen, you can move it with T
, G
, F
and H
keys, but then you'll need to detach it manually from control panel in order to make it listen to ROS-topics again.
The simulator provides simulations for almost all basic sensors that are needed for a self-driving car to be programmed. The only topic that's missing is LiDAR/Laser Scanner, but a model vehicle still can be fully driven with vision.
The subscribers of speed and steering each takes a value within a range of [-1,1]. For steering value 1.0 simulates 25 degrees right-turn of front wheels, and -1.0 the same for left turn. And for speed 1.0 simulates full speed in forward direction and -1.0 the same for backward direction.
Depending on how much it could be used, there might be a consideration to work on a lidar-simulation as well. However the aim is to keep it simple and lightweight as possible, and avoid using any heavy dependencies or physic libraries.
The View from Vehicle's Camera
Vehicle's Camera from ROS Visualizer App (rviz)
Note: The word Zaytuna means 'an olive tree' 🌱