Introduction

This application is build to show some basic options in the Cross Point Access Point API. The API is build on wamp. See http://www.wamp.ws for more information about the wamp protocol.

The endpoint to which you can connect to the CCAP API is: ws://ccap-ip-address:9000/

(This will be changed to ws://ccap-ip-address/api/ in the future).

What to expect

Multiple example scripts are included to demonstrate various commands and events. The data is extracted from the CCAP through the wamp interface. The include examples are:

counting.html

Display the visitor counting data from the connected antennas in a graph. Listens to visitor counter changed messages and updates adds the new data to this graph.

alarms.html

Loads the entrance configuration of the system and listens to new tag detected events. When an event is raised the information is written into a list with alarms. The entrance information for the device on which the alarm was raised is included.

alarmregistration.html

When an alarm event is raised the information is written into a list with alarms. A reason can be selected and this reason will be send back to the CCAP so it can be processed in the CCAP reports.

Todo list

1. Modify the endpoint to listen on port 80 with a correct URL.

Run the example

1. Get an Access Point which include the Wamp API (> v7.01)
2. Open one of the html files in a browser
3. Enter the IP address of your Access Point device in the input field
4. Press connect button