- NUCLEO-L432
- NUCLEO-L476
- Download and install the Arduino IDE (at least version v1.6.8)
- Start the Arduino IDE
- Go into Preferences
- Add
https://grumpyoldpizza.github.io/arduino-STM32L4/package_STM32L4_boards_index.json
as an "Additional Board Manager URL" - Open the Boards Manager from the Tools -> Board menu and install "STM32L4 Boards by Tlera Corp"
- Select your STM32L4 board from the Tools -> Board menu
- Go to ~/.arduino15/packages/grumpyoldpizza/hardware/stm32l4/
<VERSION>
/drivers/linux/ - sudo cp *.rules /etc/udev/rules.d
- reboot
- Download Zadig
- Plugin STM32L4 board and toggle the RESET button while holding down the BOOT button
- Let Windows finish searching for drivers
- Start
Zadig
- Select
Options -> List All Devices
- Select
STM32 BOOTLOADER
from the device dropdown - Select
WinUSB (v6.1.7600.16385)
as new driver - Click
Replace Driver
- Go to ~/AppData/Local/Arduino15/packages/grumpypoldpizza/hardware/stm32l4/
<VERSION>
/drivers/windows - Right-click on
dpinst_x86.exe
(32 bit Windows) ordpinst_amd64.exe
(64 bit Windows) and selectRun as administrator
- Click on
Install this driver software anyway
at theWindows Security
popup as the driver is unsigned
- Plugin NUCLEO board
- Download and install ST-Link USB Drivers
- Follow steps from Board Manager section above
cd <SKETCHBOOK>
, where<SKETCHBOOK>
is your Arduino Sketch folder:
- OS X:
~/Documents/Arduino
- Linux:
~/Arduino
- Windows:
~/Documents/Arduino
- Create a folder named
hardware
, if it does not exist, and change directories to it - Clone this repo:
git clone https://github.com/grumpyoldpizza/arduino-STM32L4.git grumpyoldpizza/stm32l4
- Restart the Arduino IDE
Sometimes a faulty sketch can render the normal USB Serial based integration into the Arduindo IDE not working. In this case plugin the STM32L4 board and toggle the RESET button while holding down the BOOT button and program a known to be working sketch to go ack to a working USB Serial setup.
This core is based on the Arduino SAMD Core