Companion Python library for plotting configurations and filters for CamillaDSP. It is also used by the web interface.
This library requires Python 3.8 or newer. For plotting configurations with the commandline tool plotcamillaconf
, it also requires numpy
and matplotlib
. These are not required for using only with the web interface, but if numpy
is available it will be used to speed up evaluation of FIR filters.
The easiest way to get the Python environment prepared is to use the setup scripts from camilladsp-setupscripts.
If doing a manual installation, there are many ways of installing Python and setting up environments. Please see the documentation for pycamilladsp for more information.
The dependencies matplotlib
and numpy
are defined as optional,
and the pip command shown above will not install them if they are not already available.
To tell pip to install these dependencies, run:
pip install "camilladsp-plot[plot]@git+https://github.com/HEnquist/[email protected]"
The [plot]
option tells pip to install also the optional dependencies numpy
and matplotlib
.
There is also a [numpy]
option that includes numpy
but not matplotlib
.
This library provides the console command plotcamillaconf
. Once the library is installed, together with the optional dependencies numpy and matplotlib, the command should be available in your terminal.
To use it type:
plotcamillaconf /path/to/some/config.yml
This will plot the frequency response of all the defined filters, and show a block diagram of the pipeline. As a first step, the configuration is validated to ensure it is valid. If errors are found, these will be listed and no plots generated. It also shows a list of warnings. The warnings show possible problems that don't prevent the config from being used.
Example:
Unable to plot, config has errors:
mixers/mono/mapping/sources/channel : -1 is less than the minimum of 0
filters/lowpass_2k/parameters/filename : Unable to find coefficent file 'sometext.txt'
pipeline/1/names/1 : Use of missing filter 'notch_120'
pipeline/2/names/1 : Use of missing filter 'notch_120'
pipeline : Pipeline outputs 4 channels, playback device has 2
The first part, before the ":" is the path in the config to where the error was found. The second part is a description of the error.
To plot the frequency response of a filter, use the function plot_filter
. This is mostly meant for internal use by the plotcamillaconf
command.
plot_filter(filterconf, name=None, samplerate=44100, npoints=1000, toimage=False)
This will plot using PyPlot. The filter configuration filterconf
must be provided. The samplerate
defaults to 44100 if not given. The filter name
is used for labels. The number of points in the plot is set with npoints
. If toimage
is set to True, then it will instead return the plot as an svg image.
It's also possible to plot the combined frequency response of a Filter step in the pipeline.
plot_filterstep(conf, pipelineindex, name="filterstep", npoints=1000, toimage=False)
This command takes a full configuration as conf
. It will then plot the step with index pipelineindex
in the pipeline where 0 is the first step. The name
is used for the plot title. The number of points in the plot is set with npoints
. If toimage
is set to True, then it will instead return the plot as an svg image.
To plot a block diagram of the pipeline, use the function plot_pipeline
. This is mostly meant for internal use by the plotcamillaconf
command.
plot_pipeline(conf, toimage=False)
This takes a full CamillaDSP configuration, conf
. It will then plot the pipeline using PyPlot. If toimage
is set to True, then it will instead return the plot as an svg image.
To evaluate the frequency response of a filter, use the function eval_filter
. This is mostly meant for internal use by the plotcamillaconf
command as well as the web gui.
eval_filter(filterconf, name=None, samplerate=44100, npoints=1000)
This will evaluate the filter and return the result as a dictionary. The filter configuration filterconf
must be provided. The samplerate
defaults to 44100 if not given. The filter name
is used for labels. The number of points in the plot is set with npoints
. The contents of the returned dictionary depends on the filter type. A Biquad returns name
, samplerate
, f
, magnitude
and phase
. A Conv filter additionally return the impulse response in time
and impulse
.
It's also possible to evaluate the combined frequency response of a Filter step in the pipeline.
eval_filterstep(conf, pipelineindex, name="filterstep", npoints=1000)
This command takes a full configuration as conf
. It will evaluate the step with index pipelineindex
in the pipeline where 0 is the first step. As for eval_filter, the result is returned as a dictionary with the same fields as for a Biquad.
A config file can be validated against a set of rules that match the ones in camilladsp.
This example loads and validates a config from a path supplied on the command line. This example is for a Linux machine that does not have Pulse installed. Therefore, the list of supported device types is updated to include only those supported on this system. It then gets the error and warning lists, and the processed config.
import sys
from camilladsp_plot.validate_config import CamillaValidator
file_validator = CamillaValidator()
file_validator.set_supported_playback_types(["Alsa", "File", "Stdout"])
file_validator.set_supported_capture_types(["Alsa", "File", "Stdin"])
file_validator.validate_file(sys.argv[1])
errors = file_validator.get_errors()
warnings = file_validator.get_warnings()
config_with_defaults = file_validator.get_processed_config()
CamillaValidator also has validate_yamlstring
which is used for a config supplied as a yaml string. There is also validate_config
for configs that have already been parsed into a python object.
- pipeline view: leave out bypassed blocks
- pipeline view: indicate muted channels in mixers