Skip to content

Hamid-R-Tanhaei/FPGA_Pulsed_ADC

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

3 Commits
 
 
 
 
 
 
 
 

Repository files navigation

block diagram
In this sample project a transistor-based analog-to-digital converter is interfaced to FPGA to implement a low-cost ADC. To design the ADC, an especial technique is developed based of the idea behind SAR (successive accumulation register) technique and pulse width modulation. The designed ADC consists of two blocks: comparator and integrator which are implemented by BJT transistors. The duty-cycle of output pulses of ADC is proportional to the differential of the input analog signal. At the FPGA side, an integrator is applied to the input pulse to reconstruct the original input signal. However a problem arises if there is a mismatch between zero and one periods of the pulse (because of mismatch in low-side and high-side of integrator circuit). So there's a need to compensate this mismatch inside the FPGA. Moreover, a high-pass FIR filter (with 16-tap) with a cut-off frequency around few KHz is used to eliminate any DC value as well as errors caused by imperfection in compensator mechanism. The output results are send through WIFI to the PC with a Java app running to monitor the outcome of ADC process.

ADC schematic:

schematic

Spice simulation:

waveform

Monitoring with Java Application:

Java_waveform

VHDL_code_preview

Information about WIFI and Java application are provided in repository: ADC_FPGA_WIFI



Author:

Hamid Reza Tanhaei

About

Interfacing FPGA with pulse modulation ADC

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages