Skip to content

Board Support Crate for the BetaFPV F3 Drone Flight Controller

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE.txt
MIT
LICENSE-MIT.txt
Notifications You must be signed in to change notification settings

JoshMcguigan/betafpv-f3

Repository files navigation

betafpv-f3

Board Support Crate for the BetaFPV F3 Drone Flight Controller

What works

  • LED control
  • Motor control
  • Serial communication
  • Basic gyro/accelerometer functionality
  • A script to build each example and flash it onto the controller

TODO

  • Sensor fusion
  • Radio receiver
  • USB port support

Use

To build the led-control example and flash it onto a BetaFPV F3 board, first plug the board into your computer while holding down the BOOT button to enable bootloader mode, then run the following command:

    ./flash-example led-control

License

Licensed under either of

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.

About

Board Support Crate for the BetaFPV F3 Drone Flight Controller

Topics

Resources

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE.txt
MIT
LICENSE-MIT.txt

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published