Support the Armed Forces of Ukraine and People Affected by Russia’s Aggression on UNITED24, the official fundraising platform of Ukraine: https://u24.gov.ua.
Слава Україні!
Lenovo Legion Toolkit (LLT) is a utility created for Lenovo Legion series laptops, that allows changing a couple of features that are only available in Lenovo Vantage or Legion Zone.
If your laptop is not part of Legion series, this software is not for you. Please do NOT open compatibility requests for other devices. Issues will be closed and not looked at!
It runs no background services, uses less memory, uses virtually no CPU, and contains no telemetry. Just like Lenovo Vantage, this application is Windows only.
Join the Legion Series Discord: https://discord.com/invite/legionseries!
If you are looking for a Vantage alternative that was made for Linux, check LenovoLegionLinux project.
Click here for more screenshots...
| Keyboard | Battery |
|---|---|
 |
 |
| Actions | Downloads |
|---|---|
 |
 |
| Custom Mode | Custom Mode |
|---|---|
 |
 |
- Disclaimer
- Download
- Compatibility
- Features
- Donate
- Credits
- FAQ
- Arguments
- How to collect logs?
- Contribution
The tool comes with no warranty. Use at your own risk.
Please be patient and read through this readme carefully - it contains important information.
You can download the installer from the Releases page or install using winget:
winget install BartoszCichecki.LenovoLegionToolkit
LLT works best when it's running in the background, so go to Settings and enable Autorun and Minimize on close. Next thing is to either disable Vantage and Hotkeys or just uninstall them. After that LLT will always run on startup and will take over all functions that were handled by Vantage and Hotkeys.
If you close LLT completely some functions will not work, like synchronizing power plans with current Power Mode or Actions.
If you installed LLT on a clean Windows install, make sure to have necessary drivers installed. If drivers are missing, some options might not be available. Especially make sure that these two are installed on your system:
- Lenovo Energy Management
- Lenovo Vantage Gaming Feature Driver
If for whatever reason LLT installer did not setup .NET properly:
- Go to https://dotnet.microsoft.com/en-us/download/dotnet/6.0
- Find section ".NET Desktop Runtime"
- Download x64 Windows installer
- Run the installer
After following these steps, you can open Terminal and type: dotnet --info. In the output look for section .NET runtimes installed, in this section you should see something like:
Microsoft.NETCore.App 6.0.15 [C:\Program Files\dotnet\shared\Microsoft.NETCore.App]
and
Microsoft.WindowsDesktop.App 6.0.15 [C:\Program Files\dotnet\shared\Microsoft.WindowsDesktop.App]
The exact version number can be different, but as long as it is 6.x.x it should be fine. If after these steps LLT still shows an error on startup that .NET couldn't be found or similar, the problem is on your machine and not with LLT.
Join the Legion Series Discord and head to #legion-toolkit channel. Beta versions of future releases are posted there frequently!
Lenovo Legion Toolkit is made for Lenovo Legion laptops, and other similar laptops like Ideapad Gaming, LOQ and their Chinese variants.
Generations 6 (MY2021), 7 (MY2022) and 8 (MY2023) are supported, although some features also work on the 5th generation (MY2020).
If you are getting an incompatible message on startup, you can check the Contribution section down at the bottom, to see how can you help. Keep in mind, that not always I can make all options compatible with all hardware since I do not have access to it.
Support for other laptop that are not part of Legion series is not planned.
Overall the recommendation is to disable or uninstall Vantage, Hotkeys and Legion Zone while using LLT. There are some functions that cause conflicts or may not work properly when LLT is working along side other Lenovo apps.
LLT currently does not support installation for multiple users, so if you need to have multiple users on you laptop you might encounter issues. Same goes for accounts without Administrator rights - LLT needs an account with Administrator rights. If you install LLT on an account without such rights, LLT will not work properly.
The app allows to:
- Change settings like power mode, battery charging mode, etc. that are available only through Vantage.
- Spectrum RGB, 4-zone RGB and White backlight keyboards support.
- Deactivate discrete GPU (nVidia only).
- View battery statistics.
- Download software updates.
- Define Actions that will run when the laptop is i.e. connected to AC power.
- Disable/enable Lenovo Vantage, Legion Zone and Lenovo Hotkeys service without uninstalling it.
- ... and more!
Custom Mode is available on all devices that support it. You can find it in the Power Mode dropdown as it basically is 4th power mode. Custom Mode can't be accessed with Fn+Q shortcut. Not all features of Custom Mode are supported by all devices.
If you have one of the following BIOSes:
- G9CN (24 or higher)
- GKCN (46 or higher)
- H1CN (39 or higher)
- HACN (31 or higher)
- HHCN (20 or higher)
Make sure to update it to at least minimum version mentioned above for Custom Mode to function properly.
Both Spectrum per-key RGB and 4-zone RGB backlight is supported. Vantage and it's services need to be disabled to avoid conflicts when communicating with hardware. If you use other RGB apps that might conflict with LLT, check FAQ for solutions.
Other lighting features like both 1 and 3 level white keyboard backlight, panel logo and rear ports backlight are also supported, however there are some constraints:
- GKCN54WW and lower - some lighting features are disabled due to a bug in these BIOS versions causing BSOD
- some (mostly Gen 6) laptops models might not show all options - this is due misconfigured BIOS that doesn't report availability of these features
Lighting that required Corsair iCue is not supported by LLT.
Sometimes discrete GPU stays active even when it should not. This can happen for example, if you work with an external screen and you disconnect it - some processes will keep running on discrete GPU keeping it alive and shortening battery life.
There are two ways to help the GPU deactivate:
- killing all processes running on dGPU (this one seems to work better),
- disabling dGPU for a short amount of time, which will force all processes to move to the integrated GPU.
Deactivate button will be enabled when dGPU is active, you have Hybrid mode enabled and there are no screens connected to dGPU. If you hover over the button, you will see the current P state of dGPU and the list of processes running on it.
Keep in mind that some apps may not like this feature and crash when you deactivate dGPU.
The overclock option is intended for simple overclocking, similar to the one available in Vantage. It is not intended to replace tools like Afterburner. Here are some points to keep in mind:
- Make sure GPU overclocking is enabled in BIOS, if your laptop has such option.
- Overclocking does not work with Vantage or LegionZone running in the background.
- It is not recommended to use the option while using other tools like Afterburner.
- If you edited your Dashboard, you might need to add the control manually.
Lenovo Legion Toolkit will automatically switch Windows power plans when Power Mode changes and when Lenovo Vantage is disabled.
On some laptops though, Lenovo Vantage never switched power plans. If you have one of the laptops where Lenovo Vantage does not change Windows power plans automatically you can override this behavior in Settings. This will allow Toolkit to always change Windows power plans, even if Lenovo Vantage is running in the background.
Laptops that have S0 Low Power mode enabled, also known as Modern Standby, do not work well with mutliple power plans, especially with performance power plans.
If you enjoy using the Lenovo Legion Toolkit, consider donating.
Special thanks to:
- ViRb3, for creating Lenovo Controller, which was used as a base for this tool
- falahati, for creating NvAPIWrapper and WindowsDisplayAPI
- SmokelessCPU, for help with 4-zone RGB and Sprectrum keyboard support
- Mario Bălănică, for all contributions
Translations provided by:
- Bulgarian - Ekscentricitet
- Chinese (Simplified) - 凌卡Karl
- Chinese (Traditional) - flandretw
- Czech - J0sef
- Dutch - Melm, JarneStaalPXL
- French - EliotAku, Georges de Massol, Rigbone, ZeroDegree
- German - Sko-Inductor, Running_Dead89
- Greek - GreatApo
- Italian - Lampadina17
- Karakalpak - KarLin, Gulnaz, Niyazbek Tolibaev, Shingis Joldasbaev
- Latvian - RJSkudra
- Romanian - Mario Bălănică
- Slovak - Mitschud, Newbie414
- Spanish - M.A.G.
- Portugese - dvsilva
- Portuguese (Brasil) - Vernon
- Russian - Edward Johan
- Turkish - Undervolt
- Ukrainian - Vladyslav Prydatko
- Vietnamese - Not_Nhan, Kuri
Many thanks to everyone else, who monitors and corrects translations!
- Why do I get a message that Vantage is still running, even though I uninstalled it?
- Why is my antivirus reporting that the installer contains a virus/trojan/malware?
- Can I customize hotkeys?
- Why can't I switch to Performance or Custom Power Mode on battery?
- Why does switching to Performance mode seem buggy, when AI Engine is enabled?
- Why am I getting incompatible message after motherboard replacement?
- Why isn't a game detected, even though Actions are configured properly?
- Can I use other RGB software while using LLT?
- Will iCue RGB keyboards be supported?
- Can I have more RGB effects?
- Can you add fan control to other models?
- Why don't I see the custom tooltip when I hover LLT icon in tray?
- What, if I overclocked my GPU too much?
- Which generation is my laptop?
Starting from version 2.14.0, LLT is much more strict about detecting leftover processes related to Vantage. Vantage installs 3 components:
- Lenovo Vantage app
- Lenovo Vantage Service
- System Interface Foundation V2 Device
The easiest solution is to go into LLT settings and selection options to disable Lenovo Vantage, LegionZone and Hotkeys (only still installed ones are shown).
If you want to remove them instead, make sure that you uninstall all 3, otherwise some options in LLT will not be available. You can check Task Manager for any processes containing Vantage or ImController. You can also check this guide for more info: Uninstalling System Interface Foundation V2 Device, if you have troubles getting rid of ImController processes.
LLT makes use of many low-level Windows APIs that can be falsely flagged by antiviruses as suspicious, resulting in a false-positive. LLT is open source and can easily be audited by anyone who has any doubts as to what this software does. All installers are built directly on GitHub with GitHub Actions, so that there is no doubt what they contain. This problem could be solved by signing all code, but I can't afford spending hundreds of dollars per year for an Extended Validation certificate.
If you downloaded the installer from this projects website, you shouldn't worry - the warning is a false-positive. That said, if you can help with resolving this issue, let's get in touch.
You can customize Fn+F9 hotkey in LLT settings. Other hotkeys can't be customized.
Starting with version 2.11.0, LLT's behavior was aligned with Vantage and Legion Zone and it does not allow using them without an appropriate power source.
If for whatever reason you want to use these modes on battery anyway, you can use --allow-all-power-modes-on-battery argument. Check Arguments section for more details.
Note that power limits and other settings are not applied correctly on most devices when laptop is not connected to full power AC adapter and unpredictable and weird behavior is expected. Therefore, no support is provided for issues related to using this argument.
It seems that some BIOS versions indeed have weird issues when using Fn+Q. Only hope is to wait for Lenovo to fix it.
Sometimes new motherboard does not contain correct model numbers and serial numbers. You should try this tutorial to try and recover them. If that method does not succeed, you can workaround it with --skip-compat-check argument. Check Arguments section for more details.
Game detection feature is built on top of Windows' game detection, meaning LLT will react to EXE files that Windows considers "a game". That also means that if you nuked Xbox Game Bar from your installation, there is 99.9% chance this feature will not work.
Windows probably doesn't recognize all games properly, but you can mark any program as game in Xbox Game Bar settings (Win+G). You can find list of recognized games in registry: HKEY_CURRENT_USER\System\GameConfigStore\Children.
In general yes. LLT will disable RGB controls when Vantage is running to avoid conflicts. If you use other RGB software like L5P-Keyboard-RGB or OpenRGB, you can disable RGB in LLT to avoid conflicts with --force-disable-rgbkb or --force-disable-spectrumkb argument. Check Arguments section for more details.
No. Check out OpenRGB project.
Only options natively supported by hardware are available; adding support for custom effects is not planned. If you would like more customization check out L5P-Keyboard-RGB or OpenRGB.
Fan control is available on Gen 7 and later models. Older models will not be supported due to technical limitations.
In Windows 10 and 11, Microsoft did plenty of changes to the tray, breaking a lot of things on the way. As a results custom tooltips not always work properly. Solution? Update your Windows and keep fingers crossed.
If you end up in a situation where your GPU is not stable and you can't boot into Windows, there are two things you can do:
- Go into BIOS and try to find and option similar to "Enabled GPU Overclocking" and disable it, start Windows, and toggle the BIOS option again to Enabled.
- Start Windows in Safe Mode, and delete
gpu_oc.jsonfile under LLT settings, which are located in"%LOCALAPPDATA%\LenovoLegionToolkit.
Check the model number. Example model numbers are 16ACH6H or 16IAX7. The last number of the model number indicates generation.
Some, less frequently needed, features or options can be enabled by using additional arguments. These arguments can either be passed as parameters or added to args.txt file.
--trace- enables logging to%LOCALAPPDATA%\LenovoLegionToolkit\log--minimized- starts LLT minimized to tray--skip-compat-check- disables compatibility check on startup--disable-tray-tooltip- disables tray tooltip that is shown when you hover the cursors over tray icon--allow-all-power-modes-on-battery- allows using all Power Modes without AC adapter--force-disable-rgbkb- disables all lighting features for 4-zone RGB keyboards--force-disable-spectrumkb- disables all lighting features for Spectrum per-key RGB keyboards--force-disable-lenovolighting- disables all lighting features related to panel logo, ports backlight and some white backlit keyboards--legacy-gpu-working-mode- changes GPU Working Mode switch to use legacy, less reliable, method
If you decide to use the arguments with args.txt file:
- Go to
%LOCALAPPDATA%\LenovoLegionToolkit - Create or edit
args.txtfile in there - Paste one argument per line
- Start LLT
Arguments not listed above are no longer needed or available.
In some cases it will be super useful if you can provide logs that this app can create. This helps with debugging and other issue solving.
To collect logs:
- Make sure that Lenovo Legion Toolkit is not running (also gone from tray area).
- Open
Run(Win+R) and type there:"%LOCALAPPDATA%\Programs\LenovoLegionToolkit\Lenovo Legion Toolkit.exe" --traceand hit OK - LLT will start and in the title bar you should see:
[LOGGING ENABLED] - Reproduce the issue you have (i.e. try to use the option that causes issues)
- Close LLT (also make sure it's gone from tray area)
- Again, in
Run(Win+R) type"%LOCALAPPDATA%\LenovoLegionToolkit\log" - You should see at least one file. Theses are the logs you should attach to the issue.
I appreciate any feedback that you have, so please do not hesitate to report issues. Pull Requests are also welcome, but make sure to check out CONTRIBUTING.md first!
Crowdin has been selected as the tool for handling translations. If you want to contribute, go to https://crowdin.com/project/llt and request access.
If you find any bugs in the app, please report them. It will be very helpful if you attach logs that will help to trace the root cause of the issue. You can find logs in %LOCALAPPDATA%\LenovoLegionToolkit\log. Of course attach the latest log to the issue here on GitHub.
It would be great to expand the list of compatible devices, but to do it your help is needed!
If you are willing to check if this app works correctly on your device that is currently unsupported, click Continue on the popup you saw on startup. Lenovo Legion Toolkit will start logging automatically so you can submit them if anything goes wrong.
Remember that some functions may not function properly, so keep this in mind.
I would appreciate it, if you create an issue here on GitHub with the results of your testing.
Make sure to include the following information in your issue:
- Full model name (i.e. Legion 5 Pro 16ACH6H)
- List of features that are working as expected.
- List of features that seem to not work.
- List of features that crash the app.
The more info you add, the better the app will get over time. If anything seems off, write down precisely what was wrong and attach logs (%LOCALAPPDATA%\LenovoLegionToolkit\log).
Thanks in advance!