______ ______ __ __ _ _
| ____| ____| \/ | | | |
| |__ | |__ | \ / | | | |
| __| | __| | |\/| | | | |
| | | |____| | | | |__| |
|_| |______|_| |_|\____/ -- A QEMU-based and DRAM-backed NVMe SSD Emulator
Maintainer: Huaicheng Li, Email: [email protected]
Research opportunities: Huaicheng Li is hiring Ph.D. students to join his group, feel free to contact him for details!
Feel free to contact Huaicheng for any suggestions/feedback, bug reports, or general discussions.
Please consider citing our FEMU paper at FAST 2018 if you use FEMU. The bib entry is
@InProceedings{Li+18-FEMU,
Author = {Huaicheng Li and Mingzhe Hao and Michael Hao Tong
and Swaminathan Sundararaman and Matias Bj{\o}rling and Haryadi S. Gunawi},
Title = "The CASE of FEMU: Cheap, Accurate, Scalable and Extensible Flash Emulator",
Booktitle = {Proceedings of 16th USENIX Conference on File and Storage Technologies (FAST)},
Address = {Oakland, CA},
Month = {February},
Year = {2018}
}
Please Check the growing list of research papers using FEMU here, including papers at ASPLOS, OSDI, SOSP and FAST, etc.
+--------------------+
| VM / Guest OS |
| |
| |
| NVMe Block Device |
+--------^^----------+
||
PCIe/NVMe
||
+------------------------------vv----------------------------+
| +---------+ +---------+ +---------+ +---------+ +------+ |
| | Blackbox| | OCSSD | | ZNS-SSD | | NoSSD | | ... | |
| +---------+ +---------+ +---------+ +---------+ +------+ |
| FEMU NVMe SSD Controller |
+------------------------------------------------------------+
Briefly speaking, FEMU is a fast, accurate, scalable, and extensible NVMe SSD Emulator. Based upon QEMU/KVM, FEMU is exposed to Guest OS (Linux) as an NVMe block device (e.g. /dev/nvme0nX). It supports emulating different types of SSDs:
-
Whitebox mode
(OCSSD
) (a.k.a. Software-Defined Flash (SDF), or OpenChannel-SSD) with host side FTL (e.g. LightNVM or SPDK FTL), both OpenChannel Spec 1.2 and 2.0 are supported. -
Blackbox mode
(BBSSD
) with FTL managed by the device (like most of current commercial SSDs). A page-level mapping based FTL is included. -
ZNS mode
(ZNSSD
), exposing NVMe Zone interface for the host to directly read/write/append to the device following certain rules. -
NoSSD mode
, emulating a as-fast-as-possible NVMe device with sub-10 microsecond latency. This is to emualte SCM-class block devices such as Optane or Z-NAND SSDs.
FEMU design aims to achieve the benefits of both SSD Hardware platforms (e.g. CNEX OpenChannel SSD, OpenSSD, etc.) and SSD simulators (e.g. DiskSim+SSD, FlashSim, SSDSim, etc.). Like hardware platforms, FEMU can support running full system stack (Applications + OS + NVMe interface) on top, thus enabling Software-Defined Flash (SDF) alike research with modifications at application, OS, interface or SSD controller architecture level. Like SSD simulators, FEMU can also support internal-SSD/FTL related research. Users can feel free to experiment with new FTL algorithms or SSD performance models to explore new SSD architecture innovations as well as benchmark the new arch changes with real applications, instead of using decade-old disk trace files.
- Make sure you have installed necessary libraries for building QEMU. The dependencies can be installed by following instructions below:
git clone https://github.com/vtess/femu.git
cd femu
mkdir build-femu
# Switch to the FEMU building directory
cd build-femu
# Copy femu script
cp ../femu-scripts/femu-copy-scripts.sh .
./femu-copy-scripts.sh .
# only Debian/Ubuntu based distributions supported
sudo ./pkgdep.sh
- Compile & Install FEMU:
./femu-compile.sh
FEMU binary will appear as x86_64-softmmu/qemu-system-x86_64
Tested host environment (For successful FEMU compilation):
Linux Distribution | Kernel | Gcc | Ninja | Python |
---|---|---|---|---|
Gentoo | 5.10 | 9.3.0 | 1.10.1 | 3.7.9 |
Ubuntu 16.04.5 | 4.15.0 | 5.4.0 | 1.8.2 | 3.6.0 |
Ubuntu 20.04.1 | 5.4.0 | 9.3.0 | 1.10.0 | 3.8.2 |
Ubutnu 22.04.2 | 5.15.0 | 11.3.0 | 1.10.1 | 3.10.6 |
Tested VM environment (Whether a certain FEMU mode works under a certain guest kernel version):
Mode \ Guest Kernel | 4.16 | 4.20 | 5.4 | 5.10 | 6.1 | 6.9 |
---|---|---|---|---|---|---|
NoSSD | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
BlackBox SSD | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
OpenChannel-SSD v1.2 | ✓ | ✓ | ✓ | ✓ | ✗ | ✗ |
OpenChannel-SSD v2.0 | ✗ | ✓ | ✓ | ✓ | ✗ | ✗ |
Zoned-Namespace (ZNS) SSD | ✗ | ✗ | ✗ | ✓ | ✓ | ✓ |
- Prepare the VM image (For performance reasons, we suggest to use a server version guest OS [e.g. Ubuntu Server 22.04, 20.04, 18.04, 16.04])
You can either build your own VM image, or use the VM image provided by us
Option 1: This is the recommended way to get FEMU running quickly - Use our VM image file. You can download it from our FEMU-VM-image-site. After you fill in the form, VM image downloading instructions will be sent to your email address shortly.
Option 2: Build your own VM image by following instructions: After the guest OS is installed, make following changes to redirect VM output to the console, instead of using a separate GUI window. (Desktop version guest OS is not tested)
Note: Please ask for help from Google if any of the steps doesn't work. In general, it gives you a basic idea to build your own VM image and make it run in text console.
# Download a Ubuntu server ISO file
$ mkdir -p ~/images/
$ cd ~/images
$ wget http://releases.ubuntu.com/20.04/ubuntu-20.04.3-live-server-amd64.iso
$ sudo apt-get install qemu-system-x86
# Create a QCOW2 disk image
$ qemu-img create -f qcow2 femu.qcow2 80G
# install guest OS to femu.qcow2 (You need a GUI environment to prepare the VM image)
$ qemu-system-x86_64 -cdrom ubuntu-20.04.3-live-server-amd64.iso -hda femu.qcow2 -boot d -net nic -net user -m 8192 -localtime -smp 8 -cpu host -enable-kvm
- After guest OS is installed, boot it with
$ qemu-system-x86_64 -hda femu.qcow2 -net nic -net user -m 8192 -localtime -smp 8 -cpu host -enable-kvm
If the OS is installed into femu.qcow2
, you should be able to enter the
guest OS. Inside the VM, edit /etc/default/grub
, make sure the following
options are set.
GRUB_CMDLINE_LINUX="ip=dhcp console=ttyS0,115200 console=tty console=ttyS0"
GRUB_TERMINAL=serial
GRUB_SERIAL_COMMAND="serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1"
Still in the VM, update the grub
$ sudo update-grub
$ sudo shutdown -h now
Now you're ready to Run FEMU
. If you stick to a Desktop version guest OS,
please remove "-nographics" command option from the running script before
running FEMU.
- Login to FEMU VM
- If you correctly setup the aforementioned configurations, you should be able to see text-based VM login in the same terminal where you issue the running scripts.
- Or, more conveniently, FEMU running script has mapped host port
8080
to guest VM port22
, thus, after you install and runopenssh-server
inside the VM, you can also ssh into the VM via below command line. (Please run it from your host machine)
$ ssh -p8080 $user@localhost
-
Run FEMU on a physical machine, not inside a VM (if the VM has nested virtualization enabled, you can also give it a try, but FEMU performance will suffer, this is not recommended.)
-
At least 8 cores and 12GB DRAM in the physical machine to enable seamless run of the following default FEMU scripts emulating a 4GB SSD in a VM with 4 vCPUs and 4GB DRAM.
-
If you intend to emulate a larger VM (more vCPUs and DRAM) and an SSD with larger capacity, make sure refer to the resource provisioning tips here.
TODO: currently blackbox SSD parameters are hard-coded in
hw/femu/ftl/ftl.c
, please change them accordingly and re-compile FEMU.
Boot the VM using the following script:
./run-blackbox.sh
Both OCSSD Specification 1.2 and Specification 2.0 are supported, to run FEMU OCSSD mode:
./run-whitebox.sh
By default, FEMU will run OCSSD in 2.0 mode. To run OCSSD in 1.2, make sure
OCVER=1
is set in the run-whitebox.sh
Inside the VM, you can play with LightNVM.
./run-nossd.sh
In this nossd
mode, no SSD emulation logic (either blackbox or whitebox
emulation) will be executed. Base NVMe specification is supported, and FEMU in
this case handles IOs as fast as possible. It can be used for basic performance
benchmarking, as well as fast storage-class memory (SCM, or Intel Optane SSD)
emulation.
./run-zns.sh
Stay tuned.
Stay tuned.
Github issue
and pull request
are preferred. Do let
us know if you have any thoughts!
FEMU is inspired by many prior SSD simulators/emulators (SSDSim, FlashSim,
VSSIM) as well as hardware development platforms (OpenSSD, DFC), but FEMU has
gone far beyond what prior platforms can achieve in terms of performance
,
extensibility
, and usability
.
FEMU's NVMe controller logic is based on QEMU/NVMe, LightNVM/QEMU and ZNS/QEMU.