Skip to content
This repository has been archived by the owner on Oct 12, 2020. It is now read-only.

OPHoperHPO/lilygo-ttgo-twatch-2020-micropython-lobo

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

MicroPython_lobo for LilyGO TTGO T-Watch-2020 Build firmware

UPD 22.07.2020. Deprecated. Checkout this micropython for this watch.

Add the following drivers

  • IR. Not Tested! If you test this library, open a new issue and report the results to me.
  • PCF8563 Real-time clock/calendar driver
  • BMA423 Low-g acceleration sensor driver
  • LVGL popular embedded graphics library
  • FT5x/6x touch screen driver (Updated to latest) Use ft5206.FT5206 instead of TouchScreen module
  • AXP202 advanced multi-channel power management chip driver (Updated to latest)

Examples:

IR example:

import time
from machine import Pin
from ir_rx.mce import MCE 
def callback(data, addr, ctrl):
    if data < 0: 
        print('Repeat code.')
    else:
        print('Data {:02x} Addr {:04x}'.format(data, addr))
ir = MCE(Pin(13, Pin.IN), callback)        

BMA423 interrupt example

from machine import I2C
from machine import Pin
import bma423 as bma

def handle_interrupt(pin):
	state = bma.read_irq()
	if state == bma.IRQ_STEP_COUNTER:
		s = bma.stepcount()
		print('IRQ_STEP_COUNTER %u' % s)
	elif state == bma.IRQ_DOUBLE_WAKEUP:
		print('IRQ_DOUBLE_WAKEUP')

i2c = I2C(scl=22, sda=21,speed=400000)
bma.init(i2c,irq=True)
irq = Pin(39, mode=Pin.IN,handler=handle_interrupt,trigger=Pin.IRQ_RISING)

BMA423 accel example

from machine import I2C
from machine import Pin
import bma423 as bma
import time

i2c = I2C(scl=22, sda=21,speed=400000)
bma.init(i2c)

while True:
	bma.accel()
	time.sleep_ms(200)

FT5x/6x touchscreen example

import machine
import ft5206
import time

i2c = machine.I2C(scl=32, sda=23, speed=400000)
ts = ft5206.FT5206(i2c)
while True:
  ts.get_point()
  time.sleep(0.2);

PCF8563 RTC example

import utime
import time
import pcf8563
from machine import I2C
from machine import Pin

def handle_interrupt(pin):
    if r.check_for_alarm_interrupt():
        print('is alarm clock interrupt')
    else:
        print('is not for alarm interrupt')
    r.clear_alarm()

irq = Pin(37, mode=Pin.IN,handler=handle_interrupt,trigger=Pin.IRQ_FALLING)
i2c = I2C(scl=22, sda=21)
r = pcf8563.PCF8563(i2c)

print('rtc time')
r.datetime()
time.sleep(1)

print('Clear alarm config register')
r.clear_alarm()

print('Setting current clock datetime')
r.write_all(50,30,15,3,17,9,49)

print('Set the alarm to match for minutes')
r.set_daily_alarm(minutes=31)

print('Enable rtc chip interrupt')
r.enable_alarm_interrupt()

while True:
    r.datetime()
    time.sleep(1)

AXP202 Power example

from machine import I2C
from machine import Pin
import axp202
import time

i2c = I2C(scl=22, sda=21)
print(i2c)
pmu = axp202.PMU(i2c)
pmu.enablePower(axp202.AXP202_LDO2)
pmu.setLDO2Voltage(3300)
bl = Pin(12, Pin.OUT)
bl.value(1)

'''
enable axp202 adc 
'''
pmu.enableADC(axp202.AXP202_ADC1,axp202.AXP202_BATT_VOL_ADC1)
pmu.enableADC(axp202.AXP202_ADC1, axp202.AXP202_BATT_CUR_ADC1)
pmu.enableADC(axp202.AXP202_ADC1, axp202.AXP202_VBUS_VOL_ADC1)
pmu.enableADC(axp202.AXP202_ADC1, axp202.AXP202_VBUS_CUR_ADC1)


while True:
  if pmu.isVBUSPlug():
    vbus = pmu.getVbusVoltage()
    cbus = pmu.getVbusCurrent()
    print("vbus is connect VBUS is {} mV Current is {} mA".format( vbus , cbus))

  if pmu.isBatteryConnect():
    vbatt = pmu.getBattVoltage()
    percent = pmu.getBattPercentage()
    print("battery percent is {}% battery is {} mV".format(percent , vbatt))
  time.sleep(1)

lvgl example

import lvgl as lv
import lvgl_helper as lv_h
import lvesp32
import display
import time
import machine
import ft5206
import axp202
import random

i2c0 = machine.I2C(scl=22, sda=21)
pmu = axp202.PMU(i2c0)
pmu.enablePower(axp202.AXP202_LDO2)
pmu.setLDO2Voltage(3300)
tft = display.TFT()

i2c = machine.I2C(id=1, scl=32, sda=23, speed=400000)
ts = ft5206.FT5206(i2c)

tft.init(tft.ST7789,width=240, invrot=3,rot=1,bgr=False, height=240, miso=2, mosi=19, clk=18, cs=5, dc=27,speed=40000000,color_bits=tft.COLOR_BITS16,backl_pin=12,backl_on=1)

lv.init()
disp_buf1 = lv.disp_buf_t()
buf1_1 = bytes(240*10)
lv.disp_buf_init(disp_buf1,buf1_1, None, len(buf1_1)//4)
disp_drv = lv.disp_drv_t()
lv.disp_drv_init(disp_drv)
disp_drv.buffer = disp_buf1
disp_drv.flush_cb = lv_h.flush
disp_drv.hor_res = 240
disp_drv.ver_res = 240
lv.disp_drv_register(disp_drv)

indev_drv = lv.indev_drv_t()
lv.indev_drv_init(indev_drv) 
indev_drv.type = lv.INDEV_TYPE.POINTER
indev_drv.read_cb = ts.lvgl_touch_read
lv.indev_drv_register(indev_drv)

scr = lv.obj()
btn = lv.btn(scr)
btn.set_drag(True)
btn.align(lv.scr_act(), lv.ALIGN.CENTER, 0, 0)
label = lv.label(btn)
label.set_text("Button")
lv.scr_load(scr)

Examples can be found in the modules_examples directory.

The following is Lobo original Readme, I am not going to delete it.

MicroPython for ESP32

with support for 4MB of psRAM


This repository can be used to build MicroPython for ESP32 boards/modules with psRAM as well as for ESP32 boards/modules without psRAM.

Building on Linux, MacOS and Windows (including Linux Subsystem on Windows 10) is supported.

MicroPython works great on ESP32, but the most serious issue is still (as on most other MicroPython boards) limited amount of free memory.
This repository contains all the tools and sources necessary to build working MicroPython firmware which can fully use the advantages of 4MB (or more) of psRAM.
It is huge difference between MicroPython running with less than 100KB of free memory and running with 4MB of free memory.


ESP32 can use external SPIRAM (psRAM) to expand available RAM up to 16MB.

Currently, there are several modules & development boards which incorporates 4MB of psRAM:


Wiki pages with detailed documentation specific to this MicroPython port are available.

Some examples can be found in modules_examples directory.


This repository contains all the tools and sources necessary to build working MicroPython firmware which can fully use the advantages of 4MB (or more) of psRAM

It is huge difference between MicroPython running with less than 100KB of free memory and running with 4MB of free memory.


The MicroPython firmware is built as esp-idf component

This means the regular esp-idf menuconfig system can be used for configuration. Besides the ESP32 configuration itself, many MicroPython options can also be configured via menuconfig.

This way many features not available in standard ESP32 MicroPython are enabled, like unicore/dualcore, all Flash speed/mode options etc. No manual sdkconfig.h editing and tweaking is necessary.


Features

  • MicroPython core based on latest build from main Micropython repository
  • added changes needed to build for ESP32 with psRAM
  • Default configuration has 2MB of MicroPython heap, 20KB of MicroPython stack, ~200KB of free DRAM heap for C modules and functions
  • MicroPython can be built in unicore (FreeRTOS & MicroPython task running only on the first ESP32 core, or dualcore configuration (MicroPython task running on ESP32 App core)
  • ESP32 Flash can be configured in any mode, QIO, QOUT, DIO, DOUT
  • BUILD.sh script is provided to make building MicroPython firmware as easy as possible
  • Internal Fat filesystem is built with esp-idf wear leveling driver, so there is less danger of damaging the flash with frequent writes.
  • SPIFFS filesystem is supported and can be used instead of FatFS in SPI Flash. Configurable via menuconfig
  • Flexible automatic and/or manual filesystem configuration
  • sdcard support is included which uses esp-idf sdmmc driver and can work in SD mode (1-bit and 4-bit) or in SPI mode (sd card can be connected to any pins). For imformation on how to connect sdcard see the documentation.
  • Files timestamp is correctly set to system time both on internal fat filesysten and on sdcard
  • Native ESP32 VFS support for spi Flash & sdcard filesystems.
  • RTC Class is added to machine module, including methods for synchronization of system time to ntp server, deepsleep, wakeup from deepsleep on external pin level, ...
  • Time zone can be configured via menuconfig and is used when syncronizing time from NTP server
  • Built-in ymodem module for fast transfer of text/binary files to/from host
  • Some additional frozen modules are added, like pye editor, urequests, functools, logging, ...
  • Btree module included, can be Enabled/Disabled via menuconfig
  • _threads module greatly improved, inter-thread notifications and messaging included
  • Neopixel module using ESP32 RMT peripheral with many new features
  • DHT module implemented using ESP32 RMT peripheral
  • 1-wire module implemented using ESP32 RMT peripheral
  • i2c module uses ESP32 hardware i2c driver
  • spi module uses ESP32 hardware spi driver
  • adc module improved, new functions added
  • pwm module, ESP32 hardware based
  • timer module improved, new timer types and features
  • curl module added, many client protocols including FTP and eMAIL
  • ssh module added with sftp/scp support and exec function to execute program on server
  • display module added with full support for spi TFT displays
  • mqtt module added, implemented in C, runs in separate task
  • mDNS module added, implemented in C, runs in separate task
  • telnet module added, connect to REPL via WiFi using telnet protocol
  • ftp server module added, runs as separate ESP32 task
  • GSM/PPPoS support, connect to the Internet via GSM module
  • OTA Update supported, various partitions layouts
  • Eclipse project files included. To include it into Eclipse goto File->Import->Existing Projects into Workspace->Select root directory->[select MicroPython_BUILD directory]->Finish. Rebuild index.

How to Build


Detailed instructions on MicroPython building process are available in the Wiki.


Using file systems

Detailed information about using MicroPython file systems are available in the Wiki.


Some examples

Using new machine methods and RTC:

import machine

rtc = machine.RTC()

rtc.init((2017, 6, 12, 14, 35, 20))

rtc.now()

rtc.ntp_sync(server="<ntp_server>" [,update_period=])
  # <ntp_server> can be empty string, then the default server is used ("pool.ntp.org")

rtc.synced()
  # returns True if time synchronized to NTP server

rtc.wake_on_ext0(Pin, level)
rtc.wake_on_ext1(Pin, level)
  # wake up from deepsleep on pin level

machine.deepsleep(10000)
ESP32: DEEP SLEEP

# ...
# ...

Reset reason: Deepsleep wake-up
Wakeup source: RTC wake-up
    uPY stack: 19456 bytes
     uPY heap: 3073664/5664/3068000 bytes (in SPIRAM using malloc)

MicroPython ESP32_LoBo_v3.1.0 - 2017-01-03 on ESP32 board with ESP32
Type "help()" for more information.

machine.wake_reason()
  # returns tuple with reset & wakeup reasons
machine.wake_description()
  # returns tuple with strings describing reset & wakeup reasons

Using sdcard module:

import uos

uos.mountsd()
uos.listdir('/sd')

Working directory can be changed to root of the sd card automatically on mount:

>>> import uos
>>> uos.mountsd(True)
---------------------
 Mode:  SD (4bit)
 Name: NCard
 Type: SDHC/SDXC
Speed: default speed (25 MHz)
 Size: 15079 MB
  CSD: ver=1, sector_size=512, capacity=30881792 read_bl_len=9
  SCR: sd_spec=2, bus_width=5

>>> uos.listdir()
['overlays', 'bcm2708-rpi-0-w.dtb', ......
>>>

Tested on ESP-WROVER-KIT v3 Tested on


Example terminal session

I (0) cpu_start: App cpu up.
I (1569) spiram: SPI SRAM memory test OK
I (1570) heap_init: Initializing. RAM available for dynamic allocation:
D (1570) heap_init: New heap initialised at 0x3ffae6e0
I (1575) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
D (1581) heap_init: New heap initialised at 0x3ffc1a00
I (1586) heap_init: At 3FFC1A00 len 0001E600 (121 KiB): DRAM
I (1593) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM
I (1599) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
D (1606) heap_init: New heap initialised at 0x4009d70c
I (1611) heap_init: At 4009D70C len 000028F4 (10 KiB): IRAM
I (1617) cpu_start: Pro cpu start user code
I (1622) spiram: Adding pool of 4096K of external SPI memory to heap allocator
I (1630) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations
D (1646) clk: RTC_SLOW_CLK calibration value: 3305242
D (89) intr_alloc: Connected src 46 to int 2 (cpu 0)
D (90) intr_alloc: Connected src 57 to int 3 (cpu 0)
D (90) intr_alloc: Connected src 24 to int 9 (cpu 0)
I (95) cpu_start: Starting scheduler on PRO CPU.
D (0) intr_alloc: Connected src 25 to int 2 (cpu 1)
I (4) cpu_start: Starting scheduler on APP CPU.
D (119) heap_init: New heap initialised at 0x3ffe0440
D (125) heap_init: New heap initialised at 0x3ffe4350
D (130) intr_alloc: Connected src 16 to int 12 (cpu 0)
D (145) nvs: nvs_flash_init_custom partition=nvs start=9 count=4
D (178) intr_alloc: Connected src 34 to int 3 (cpu 1)
D (187) intr_alloc: Connected src 22 to int 4 (cpu 1)

Internal FS (SPIFFS): Mounted on partition 'internalfs' [size: 1048576; Flash address: 0x2D0000]
----------------
Filesystem size: 956416 B
           Used: 512 B
           Free: 955904 B
----------------

FreeRTOS running on BOTH CORES, MicroPython task running on both cores.
Running from partition at 10000, type 10 [MicroPython_1].

 Reset reason: Power on reset
    uPY stack: 19456 bytes
     uPY heap: 3073664/5664/3068000 bytes (in SPIRAM using malloc)

MicroPython ESP32_LoBo_v3.1.0 - 2017-01-03 on ESP32 board with ESP32
Type "help()" for more information.
>>> 
>>> import micropython, machine
>>> 
>>> micropython.mem_info()
stack: 752 out of 19456
GC: total: 3073664, used: 5904, free: 3067760
 No. of 1-blocks: 19, 2-blocks: 7, max blk sz: 325, max free sz: 191725
>>> 
>>> machine.heap_info()
Heap outside of MicroPython heap:
---------------------------------
              Free: 239920
         Allocated: 52328
      Minimum free: 233100
      Total blocks: 85
Largest free block: 113804
  Allocated blocks: 79
       Free blocks: 6

SPIRAM info:
------------
              Free: 1048532
         Allocated: 3145728
      Minimum free: 1048532
      Total blocks: 2
Largest free block: 1048532
  Allocated blocks: 1
       Free blocks: 1
>>>

About

Lobo_MicroPython for LilyGO TTGO T-Watch-2020

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 89.5%
  • C++ 4.8%
  • Python 3.2%
  • Makefile 0.8%
  • Shell 0.5%
  • CMake 0.3%
  • Other 0.9%