Skip to content

OpenSolo/mavlink-solo

 
 

Repository files navigation

Build Status

MAVLink

MAVLink -- Micro Air Vehicle Message Marshalling Library.

This is a library for lightweight communication between Micro Air Vehicles (swarm) and/or ground control stations. It allows for defining messages within XML files, which then are converted into appropriate source code for different languages. These XML files are called dialects, most of which build on the common dialect provided in common.xml.

The MAVLink protocol performs byte-level serialization and so is appropriate for use with any type of radio modem.

This repository is largely Python scripts that convert XML files into language-specific libraries. There are additional Python scripts providing examples and utilities for working with MAVLink data. These scripts, as well as the generated Python code for MAVLink dialects, require Python 2.7 or greater.

Note that there are two incompatible versions of the MAVLink protocol: v0.9 and v1.0. Most programs, including QGroundControl, have switched over to v1.0. The v0.9 protocol is DEPRECATED and should only be used to maintain backwards compatibility where necessary.

Requirements

  • Python 2.7+
    • Tkinter (if GUI functionality is desired)

Installation

  1. Clone into a user-writable directory.
  2. Add the repository directory to your PYTHONPATH
  3. Generate MAVLink parser files following the instructions in the next section AND/OR run included helper scripts described in the Scripts/Examples secion.

Generating Language-specific Source Files

Language-specific files can be generated via a Python script from the command line or using a GUI. If a dialect XML file has a dependency on another XML file, they must be located in the same directory. Since most MAVLink dialects depend on the common messageset, it is recommend that you place your dialect with the others in /message_definitions/v1.0/.

Available languages are:

  • C
  • C#
  • Java
  • JavaScript
  • Lua
  • Python, version 2.7+

From a GUI (recommended)

mavgenerate.py is a header generation tool GUI written in Python. It requires Tkinter, which is only included with Python on Windows, so it will need to be installed separately on non-Windows platforms. It can be run from anywhere using Python's -m argument:

$ python -m mavgenerate

From the command line

mavgen.py is a command-line interface for generating a language-specific MAVLink library. This is actually the backend used by mavgenerate.py. After the mavlink directory has been added to the Python path, it can be run by executing from the command line:

$ python -m pymavlink.tools.mavgen

Usage

Using the generated MAVLink dialect libraries varies depending on the language, with language-specific details below:

C

To use MAVLink, include the mavlink.h header file in your project:

#include <mavlink.h>

Do not include the individual message files. In some cases you will have to add the main folder to the include search path as well. To be safe, we recommend these flags:

$ gcc -I mavlink/include -I mavlink/include/<your message set, e.g. common>

The C MAVLink library utilizes a channels metaphor to allow for simultaneous processing of multiple MAVLink streams in the same program. It is therefore important to use the correct channel for each operation as all receiving and transmitting functions provided by MAVLink require a channel. If only one MAVLink stream exists, channel 0 should be used by using the MAVLINK_COMM_0 constant.

Receiving

MAVLink reception is then done using mavlink_helpers.h:mavlink_parse_char().

Transmitting

Transmitting can be done by using the mavlink_msg_*_pack() function, where one is defined for every message. The packed message can then be serialized with mavlink_helpers.h:mavlink_msg_to_send_buffer() and then writing the resultant byte array out over the appropriate serial interface.

It is possible to simplify the above by writing wrappers around the transmitting/receiving code. A multi-byte writing macro can be defined, MAVLINK_SEND_UART_BYTES(), or a single-byte function can be defined, comm_send_ch(), that wrap the low-level driver for transmitting the data. If this is done, MAVLINK_USE_CONVENIENCE_FUNCTIONS must be defined.

Scripts/Examples

This MAVLink library also comes with supporting libraries and scripts for using, manipulating, and parsing MAVLink streams within the pymavlink, pymav link/tools, and pymavlink/examples directories.

The scripts have the following requirements:

  • Python 2.7+
  • mavlink repository folder in PYTHONPATH
  • Write access to the entire mavlink folder.
  • Your dialect's XML file is in message_definitions/*/

Running these scripts can be done by running Python with the '-m' switch, which indicates that the given script exists on the PYTHONPATH. This is the proper way to run Python scripts that are part of a library as per PEP-328 (and the rejected PEP-3122). The following code runs mavlogdump.py in /pymavlink/tools/ on the recorded MAVLink stream test_run.mavlink (other scripts in /tools and /scripts can be run in a similar fashion):

$ python -m pymavlink.tools.mavlogdump test_run.mavlink

License

MAVLink is licensed under the terms of the Lesser General Public License (version 3) of the Free Software Foundation (LGPLv3). The C-language version of MAVLink is a header-only library, and as such compiling an application with it is considered "using the library", not a derived work. MAVLink can therefore be used without limits in any closed-source application without publishing the source code of the closed-source application.

See the COPYING file for more info.

Credits

© 2009-2014 Lorenz Meier

About

MAVlink Protocol Setup for solo

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 66.1%
  • C 20.5%
  • CMake 5.3%
  • Objective-C 2.3%
  • C# 2.3%
  • JavaScript 1.6%
  • Other 1.9%