Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Remember Feed- and Flow-Rate #643

Merged
merged 1 commit into from
May 15, 2020
Merged

Remember Feed- and Flow-Rate #643

merged 1 commit into from
May 15, 2020

Conversation

UnchartedBull
Copy link
Owner

Fixes #640

@UnchartedBull UnchartedBull merged commit 7be368b into master May 15, 2020
@UnchartedBull UnchartedBull deleted the fix/remember-feed-and-flow-rate branch May 15, 2020 14:38
@thegarbz
Copy link
Collaborator

Erm sorry to raise this point again even though you just corrected it. On the discussion with the OctoPrint developer he was completely resistant to maintaining a value that is ephemeral in Octoprint. Meaning that if the firmware can't confirm what the rate currently is the software shouldn't attempt to memorise it. His view has actually been to blank out the feedrate and flowrate when the user leaves the tab or after the user submits a new value to the printer.

For consistency sake this may be a better solution for Octodash as well. Frankly I'm okay with either option. But Octoprint's solution does reflect that Octoprint doesn't actually know what the printer is doing.

But anyway this is just for consideration.

UnchartedBull added a commit that referenced this pull request May 15, 2020
@UnchartedBull @jneilliii @dependabot-preview
merge master (#645)
fa13e96 
* Additional Thumbnail Support (#601)

* Changes necessary to support both PrusaSlicerThumbnails and UltimakerFormatPackage plugin's extracted thumbnails

* Update src/app/files/files.component.html

Co-Authored-By: Timon G. <[email protected]>

* Update src/app/files.service.ts

Co-Authored-By: Timon G. <[email protected]>

* Update src/app/files.service.ts

Co-Authored-By: Timon G. <[email protected]>

* change to string for thumbnail

Co-authored-by: Timon G. <[email protected]>

* Bump electron from 8.2.3 to 8.2.4 (#602)

* Properly handle Connection Errors (#569)

* ignore first 500 error

* properly check for connection errors

* check against connecting state as well

* Bump @angular/language-service from 9.1.3 to 9.1.4 (#604)

* Bump @angular/cli from 9.1.3 to 9.1.4 (#605)

* Bump @angular-devkit/build-angular from 0.901.3 to 0.901.4 (#606)

* Bump electron from 8.2.4 to 8.2.5 (#608)

* Bump electron-builder from 22.5.1 to 22.6.0 (#603)

* Bump ts-node from 8.9.1 to 8.10.0 (#611)

* Bump ts-node from 8.10.0 to 8.10.1 (#612)

* Bump wait-on from 4.0.2 to 5.0.0 (#618)

* Bump @types/node from 13.13.4 to 13.13.5 (#619)

* Bump tslib from 1.11.1 to 1.11.2 (#621)

* Bump @angular/language-service from 9.1.4 to 9.1.5 (#626)

* Bump @angular/language-service from 9.1.5 to 9.1.6 (#628)

* Bump @angular/cli from 9.1.4 to 9.1.5 (#629)

* Bump @angular-devkit/build-angular from 0.901.4 to 0.901.5 (#630)

* Bump tslib from 1.11.2 to 1.12.0 (#632)

* Bump @types/node from 13.13.5 to 14.0.0 (#634)

* Bump @types/node from 14.0.0 to 14.0.1 (#635)

* Bump @angular/language-service from 9.1.6 to 9.1.7 (#636)

* Bump tslib from 1.12.0 to 1.13.0 (#637)

* Bump @angular/cli from 9.1.5 to 9.1.6 (#638)

* Bump electron from 8.2.5 to 8.3.0 (#641)

* Bump @angular-devkit/build-angular from 0.901.5 to 0.901.6 (#639)

* Filament Change Process (#642)

* basic pagination

* styling filament list

* load spools from FilamentManager

* spool list almost done, some regex issues

* Finished Spool Listing

* Started working on heating screen

* finish page 2 design

* update config for extruder speed

* add config parameter + update initial setup screen

* progress on page 2

* finish filament unload

* finished screen 3

* finish page 4 design

* finish page 5 styling

* some fixes

* starting to add functionality

* Should be all working now

* make extruder movements works

* some fixes

* Add settings

* naming and default values

* CodeFactor issues

* disable extruder after unloading filament

* Bump @types/lodash from 4.14.150 to 4.14.151 (#644)

* working (#643)

* Update README

* 1.5.0

* Update Changelog

* fix config error

Co-authored-by: jneilliii <[email protected]>
Co-authored-by: dependabot-preview[bot] <27856297+dependabot-preview[bot]@users.noreply.github.com>
UnchartedBull added a commit that referenced this pull request May 15, 2020
@UnchartedBull @dependabot-preview
merge master (#646)
8af05d1 
* Bump ts-node from 8.9.1 to 8.10.0 (#611)

* Bump ts-node from 8.10.0 to 8.10.1 (#612)

* Bump wait-on from 4.0.2 to 5.0.0 (#618)

* Bump @types/node from 13.13.4 to 13.13.5 (#619)

* Bump tslib from 1.11.1 to 1.11.2 (#621)

* Bump @angular/language-service from 9.1.4 to 9.1.5 (#626)

* Bump @angular/language-service from 9.1.5 to 9.1.6 (#628)

* Bump @angular/cli from 9.1.4 to 9.1.5 (#629)

* Bump @angular-devkit/build-angular from 0.901.4 to 0.901.5 (#630)

* Bump tslib from 1.11.2 to 1.12.0 (#632)

* Bump @types/node from 13.13.5 to 14.0.0 (#634)

* Bump @types/node from 14.0.0 to 14.0.1 (#635)

* Bump @angular/language-service from 9.1.6 to 9.1.7 (#636)

* Bump tslib from 1.12.0 to 1.13.0 (#637)

* Bump @angular/cli from 9.1.5 to 9.1.6 (#638)

* Bump electron from 8.2.5 to 8.3.0 (#641)

* Bump @angular-devkit/build-angular from 0.901.5 to 0.901.6 (#639)

* Filament Change Process (#642)

* basic pagination

* styling filament list

* load spools from FilamentManager

* spool list almost done, some regex issues

* Finished Spool Listing

* Started working on heating screen

* finish page 2 design

* update config for extruder speed

* add config parameter + update initial setup screen

* progress on page 2

* finish filament unload

* finished screen 3

* finish page 4 design

* finish page 5 styling

* some fixes

* starting to add functionality

* Should be all working now

* make extruder movements works

* some fixes

* Add settings

* naming and default values

* CodeFactor issues

* disable extruder after unloading filament

* Bump @types/lodash from 4.14.150 to 4.14.151 (#644)

* working (#643)

* Update README

* 1.5.0

* Update Changelog

* fix config error

Co-authored-by: dependabot-preview[bot] <27856297+dependabot-preview[bot]@users.noreply.github.com>
UnchartedBull added a commit that referenced this pull request Aug 20, 2020
@UnchartedBull @jneilliii
@dependabot-preview @code-factor
OctoDash Website (#924)
70d1623 
* starting the website

* more cleanup, add screenshots, installation

* add supported plugins

* Add tips and tricks

* Finish up design so far

* move style sheets

* merge master (#645)

* Additional Thumbnail Support (#601)

* Changes necessary to support both PrusaSlicerThumbnails and UltimakerFormatPackage plugin's extracted thumbnails

* Update src/app/files/files.component.html

Co-Authored-By: Timon G. <[email protected]>

* Update src/app/files.service.ts

Co-Authored-By: Timon G. <[email protected]>

* Update src/app/files.service.ts

Co-Authored-By: Timon G. <[email protected]>

* change to string for thumbnail

Co-authored-by: Timon G. <[email protected]>

* Bump electron from 8.2.3 to 8.2.4 (#602)

* Properly handle Connection Errors (#569)

* ignore first 500 error

* properly check for connection errors

* check against connecting state as well

* Bump @angular/language-service from 9.1.3 to 9.1.4 (#604)

* Bump @angular/cli from 9.1.3 to 9.1.4 (#605)

* Bump @angular-devkit/build-angular from 0.901.3 to 0.901.4 (#606)

* Bump electron from 8.2.4 to 8.2.5 (#608)

* Bump electron-builder from 22.5.1 to 22.6.0 (#603)

* Bump ts-node from 8.9.1 to 8.10.0 (#611)

* Bump ts-node from 8.10.0 to 8.10.1 (#612)

* Bump wait-on from 4.0.2 to 5.0.0 (#618)

* Bump @types/node from 13.13.4 to 13.13.5 (#619)

* Bump tslib from 1.11.1 to 1.11.2 (#621)

* Bump @angular/language-service from 9.1.4 to 9.1.5 (#626)

* Bump @angular/language-service from 9.1.5 to 9.1.6 (#628)

* Bump @angular/cli from 9.1.4 to 9.1.5 (#629)

* Bump @angular-devkit/build-angular from 0.901.4 to 0.901.5 (#630)

* Bump tslib from 1.11.2 to 1.12.0 (#632)

* Bump @types/node from 13.13.5 to 14.0.0 (#634)

* Bump @types/node from 14.0.0 to 14.0.1 (#635)

* Bump @angular/language-service from 9.1.6 to 9.1.7 (#636)

* Bump tslib from 1.12.0 to 1.13.0 (#637)

* Bump @angular/cli from 9.1.5 to 9.1.6 (#638)

* Bump electron from 8.2.5 to 8.3.0 (#641)

* Bump @angular-devkit/build-angular from 0.901.5 to 0.901.6 (#639)

* Filament Change Process (#642)

* basic pagination

* styling filament list

* load spools from FilamentManager

* spool list almost done, some regex issues

* Finished Spool Listing

* Started working on heating screen

* finish page 2 design

* update config for extruder speed

* add config parameter + update initial setup screen

* progress on page 2

* finish filament unload

* finished screen 3

* finish page 4 design

* finish page 5 styling

* some fixes

* starting to add functionality

* Should be all working now

* make extruder movements works

* some fixes

* Add settings

* naming and default values

* CodeFactor issues

* disable extruder after unloading filament

* Bump @types/lodash from 4.14.150 to 4.14.151 (#644)

* working (#643)

* Update README

* 1.5.0

* Update Changelog

* fix config error

Co-authored-by: jneilliii <[email protected]>
Co-authored-by: dependabot-preview[bot] <27856297+dependabot-preview[bot]@users.noreply.github.com>

* update to match wiki

* Update FAQ

* fixed some issue with mobile devices

* Language + Formatting

* update images

* [CodeFactor] Apply fixes

* Codefactor

Co-authored-by: jneilliii <[email protected]>
Co-authored-by: dependabot-preview[bot] <27856297+dependabot-preview[bot]@users.noreply.github.com>
Co-authored-by: codefactor-io <[email protected]>
kantlivelong pushed a commit to kantlivelong/OctoDash that referenced this pull request May 5, 2021
@UnchartedBull @jneilliii
@dependabot-preview @code-factor @kantlivelong
OctoDash Website (UnchartedBull#924)
0ff93dc 
* starting the website

* more cleanup, add screenshots, installation

* add supported plugins

* Add tips and tricks

* Finish up design so far

* move style sheets

* merge master (UnchartedBull#645)

* Additional Thumbnail Support (UnchartedBull#601)

* Changes necessary to support both PrusaSlicerThumbnails and UltimakerFormatPackage plugin's extracted thumbnails

* Update src/app/files/files.component.html

Co-Authored-By: Timon G. <[email protected]>

* Update src/app/files.service.ts

Co-Authored-By: Timon G. <[email protected]>

* Update src/app/files.service.ts

Co-Authored-By: Timon G. <[email protected]>

* change to string for thumbnail

Co-authored-by: Timon G. <[email protected]>

* Bump electron from 8.2.3 to 8.2.4 (UnchartedBull#602)

* Properly handle Connection Errors (UnchartedBull#569)

* ignore first 500 error

* properly check for connection errors

* check against connecting state as well

* Bump @angular/language-service from 9.1.3 to 9.1.4 (UnchartedBull#604)

* Bump @angular/cli from 9.1.3 to 9.1.4 (UnchartedBull#605)

* Bump @angular-devkit/build-angular from 0.901.3 to 0.901.4 (UnchartedBull#606)

* Bump electron from 8.2.4 to 8.2.5 (UnchartedBull#608)

* Bump electron-builder from 22.5.1 to 22.6.0 (UnchartedBull#603)

* Bump ts-node from 8.9.1 to 8.10.0 (UnchartedBull#611)

* Bump ts-node from 8.10.0 to 8.10.1 (UnchartedBull#612)

* Bump wait-on from 4.0.2 to 5.0.0 (UnchartedBull#618)

* Bump @types/node from 13.13.4 to 13.13.5 (UnchartedBull#619)

* Bump tslib from 1.11.1 to 1.11.2 (UnchartedBull#621)

* Bump @angular/language-service from 9.1.4 to 9.1.5 (UnchartedBull#626)

* Bump @angular/language-service from 9.1.5 to 9.1.6 (UnchartedBull#628)

* Bump @angular/cli from 9.1.4 to 9.1.5 (UnchartedBull#629)

* Bump @angular-devkit/build-angular from 0.901.4 to 0.901.5 (UnchartedBull#630)

* Bump tslib from 1.11.2 to 1.12.0 (UnchartedBull#632)

* Bump @types/node from 13.13.5 to 14.0.0 (UnchartedBull#634)

* Bump @types/node from 14.0.0 to 14.0.1 (UnchartedBull#635)

* Bump @angular/language-service from 9.1.6 to 9.1.7 (UnchartedBull#636)

* Bump tslib from 1.12.0 to 1.13.0 (UnchartedBull#637)

* Bump @angular/cli from 9.1.5 to 9.1.6 (UnchartedBull#638)

* Bump electron from 8.2.5 to 8.3.0 (UnchartedBull#641)

* Bump @angular-devkit/build-angular from 0.901.5 to 0.901.6 (UnchartedBull#639)

* Filament Change Process (UnchartedBull#642)

* basic pagination

* styling filament list

* load spools from FilamentManager

* spool list almost done, some regex issues

* Finished Spool Listing

* Started working on heating screen

* finish page 2 design

* update config for extruder speed

* add config parameter + update initial setup screen

* progress on page 2

* finish filament unload

* finished screen 3

* finish page 4 design

* finish page 5 styling

* some fixes

* starting to add functionality

* Should be all working now

* make extruder movements works

* some fixes

* Add settings

* naming and default values

* CodeFactor issues

* disable extruder after unloading filament

* Bump @types/lodash from 4.14.150 to 4.14.151 (UnchartedBull#644)

* working (UnchartedBull#643)

* Update README

* 1.5.0

* Update Changelog

* fix config error

Co-authored-by: jneilliii <[email protected]>
Co-authored-by: dependabot-preview[bot] <27856297+dependabot-preview[bot]@users.noreply.github.com>

* update to match wiki

* Update FAQ

* fixed some issue with mobile devices

* Language + Formatting

* update images

* [CodeFactor] Apply fixes

* Codefactor

Co-authored-by: jneilliii <[email protected]>
Co-authored-by: dependabot-preview[bot] <27856297+dependabot-preview[bot]@users.noreply.github.com>
Co-authored-by: codefactor-io <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.

Current feedrate not correctly shown in the adjust menu
2 participants
@UnchartedBull @thegarbz