This application does upgrade firmware of the built-in keyboard and touchpad.
git clone https://github.com/ayufan-rock64/pinebook-pro-keyboard-updater
cd pinebook-pro-keyboard-updater
sudo apt-get install build-essential libusb-1.0-0-dev xxd
make
Pinebook Pro offers two keyboard types: ISO
and ANSI
.
Append your model type after the step-1
or step-2
command specifying iso
or ansi
.
In order to update with ANSI
keyboard the external keyboard will be required as for the duration of the process the keyboard will stop working.
You need to do all of that in correct order, if at any point process fails, start it from point 1.:
- Run
step-1 iso
orstep-1 ansi
of update process:sudo ./updater step-1 iso
, - After
step-1 iso
orstep-1 ansi
touchpad will not work, keyboard works as normal (this is true only for ISO, the ANSI keyboard will not work afterstep-1
), - Reboot with
sudo reboot
, - After reboot, run
step-2 iso
orstep-2 ansi
of update process:sudo ./updater step-2
, - Reboot with
sudo reboot
, - After reboot, your keyboard and touchpad firmware should be updated.
# compile
git clone https://github.com/ayufan-rock64/pinebook-pro-keyboard-updater
cd pinebook-pro-keyboard-updater
sudo apt-get install build-essential libusb-1.0-0-dev xxd
make
# For ISO keyboard
# step-1
sudo ./updater step-1 iso
sudo reboot
# after reboot, step-2
sudo ./updater step-2 iso
sudo reboot
# For ANSI keyboard
# step-1
sudo ./updater step-1 ansi
sudo reboot
# after reboot, step-2
sudo ./updater step-2 ansi
sudo reboot
$ sudo ./updater step-1 iso
Running STEP-1...
[*] Flashing keyboard updater firmware...
>>> Fix hex file
[*] Opening in user mode...
>>> Trying to open VID:258a PID:001e...
>>> Device not found
>>> Trying to open VID:258a PID:001f...
[*] Sending command to switch to boot mode...
[*] Command send
>>> release interface
[*] Opening in boot mode
>>> Trying to open VID:0603 PID:1020...
>>> Device not found
>>> Trying to open VID:0603 PID:1020...
>>> Kernel Driver Active
[*] Erasing flash
[*] Writing firmware...
>>> USB: write_block_start (length=14336)
>>> USB: write_block (offset=0, length=2048)
>>> USB: write_block (offset=2048, length=2048)
>>> USB: write_block (offset=4096, length=2048)
>>> USB: write_block (offset=6144, length=2048)
>>> USB: write_block (offset=8192, length=2048)
>>> USB: write_block (offset=10240, length=2048)
>>> USB: write_block (offset=12288, length=2048)
>>> USB: write_block_start (length=14336)
>>> USB: write_block (offset=0, length=2048)
[*] Reading back firmware...
>>> USB: read_block_start (length=14336)
>>> USB: read_block (offset=0, length=2048)
>>> USB: read_block (offset=2048, length=2048)
>>> USB: read_block (offset=4096, length=2048)
>>> USB: read_block (offset=6144, length=2048)
>>> USB: read_block (offset=8192, length=2048)
>>> USB: read_block (offset=10240, length=2048)
>>> USB: read_block (offset=12288, length=2048)
[*] Comparing firmwares...
[*] Reseting device?
[*] Finished succesfully!
>>> release interface
[*] Please reboot now, and run `step-2`.
$ sudo ./updater step-2 iso
Running STEP-2...
[*] Flashing touchpad firmware...
[*] Opening in touchpad mode
>>> Trying to open VID:258a PID:001f...
>>> Kernel Driver Active
>>> Writing offset:0 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:1024 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:2048 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:3072 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:4096 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:5120 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:6144 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:7168 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:8192 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:9216 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:10240 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:11264 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:12288 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:13312 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:14336 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:15360 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:16384 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:17408 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:18432 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:19456 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:20480 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:21504 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:22528 length:1024...
>>> Verifying '1k-data'...
>>> Writing offset:23552 length:1024...
>>> Verifying '1k-data'...
[*] Verifying 'end-program'...
[*] Verifying 'checksum'...
[*] Verifying 'program'...
[*] Finished succesfully!
>>> release interface
[*] Flashing ISO keyboard firmware...
>>> Fix hex file
[*] Opening in user mode...
>>> Trying to open VID:258a PID:001e...
>>> Device not found
>>> Trying to open VID:258a PID:001f...
[*] Sending command to switch to boot mode...
[*] Command send
>>> release interface
[*] Opening in boot mode
>>> Trying to open VID:0603 PID:1020...
>>> Device not found
>>> Trying to open VID:0603 PID:1020...
>>> Kernel Driver Active
[*] Erasing flash
[*] Writing firmware...
>>> USB: write_block_start (length=14336)
>>> USB: write_block (offset=0, length=2048)
>>> USB: write_block (offset=2048, length=2048)
>>> USB: write_block (offset=4096, length=2048)
>>> USB: write_block (offset=6144, length=2048)
>>> USB: write_block (offset=8192, length=2048)
>>> USB: write_block (offset=10240, length=2048)
>>> USB: write_block (offset=12288, length=2048)
>>> USB: write_block_start (length=14336)
>>> USB: write_block (offset=0, length=2048)
[*] Reading back firmware...
>>> USB: read_block_start (length=14336)
>>> USB: read_block (offset=0, length=2048)
>>> USB: read_block (offset=2048, length=2048)
>>> USB: read_block (offset=4096, length=2048)
>>> USB: read_block (offset=6144, length=2048)
>>> USB: read_block (offset=8192, length=2048)
>>> USB: read_block (offset=10240, length=2048)
>>> USB: read_block (offset=12288, length=2048)
[*] Comparing firmwares...
[*] Reseting device?
[*] Finished succesfully!
>>> release interface
[*] All done! Your keyboard and touchpad should be updated.
MIT, 2019, SHEN ZHEN HAI LUCK ELECTRONIC TECHNOLOGY CO., LTD