Replies: 12 comments 3 replies
-
Hi @Jens314, |
Beta Was this translation helpful? Give feedback.
-
sure, here it is: { |
Beta Was this translation helpful? Give feedback.
-
Hello, good morning, the same thing happened to me, in the pellematic when you activate json you don't have to set compatible mode, after which you will see the correct values
… Il giorno 11 feb 2023, alle ore 17:51, Jens314 ***@***.***> ha scritto:
Hi Dominik, thanks for this wonderful Integration. I have just started playing around and getting into all of this home assistant stuff. Anyway I managed to get things running and I can see the sensor values in HA, see picture. Unfortunately by factor 10x too high.
As I can see in your code at some point you are dividing the values by 10.
Do you have an idea what is going wrong here?
Thanks Jens
<https://user-images.githubusercontent.com/125146110/218270320-adc9455c-40ba-4885-ba7c-569904a7267b.png>
—
Reply to this email directly, view it on GitHub <#11>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A2LNND3KBMIPZXMRVOAMVTLWW67PJANCNFSM6AAAAAAUYZIBNQ>.
You are receiving this because you are subscribed to this thread.
|
Beta Was this translation helpful? Give feedback.
-
Thanks Luca, I can remember that I activated this "compatibility mode" accidentally. But now I can not get back to this option in the menu!? Not by deactivating JSON and not even by switching the complete heater off/on. How did you change it back? |
Beta Was this translation helpful? Give feedback.
-
you must enter the code number hour plus date day
… Il giorno 13 feb 2023, alle ore 21:30, Jens314 ***@***.***> ha scritto:
Thanks Luca, I can remember that I activated this "compatibility mode" accidentally. But now I can not get back to this option in the menu!? Not by deactivating JSON and not even by switching the complete heater off/on. How did you change it back?
|
Beta Was this translation helpful? Give feedback.
-
ok, thanks, I tried this too. Still no possibility to change the "compatibility mode". A technician told me on the phone this may be a bug caused by an old SW version. Well, maybe I can find a solution around this. |
Beta Was this translation helpful? Give feedback.
-
what software version do you have?
… Il giorno 14 feb 2023, alle ore 14:12, Jens314 ***@***.***> ha scritto:
ok, thanks, I tried this too. Still no possibility to change the "compatibility mode". A technician told me on the phone this may be a bug caused by an old SW version. Well, maybe I can find a solution around this.
—
Reply to this email directly, view it on GitHub <#11 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A2LNND2TRTTVFJPRLBT3MGLWXOAEXANCNFSM6AAAAAAUYZIBNQ>.
You are receiving this because you commented.
|
Beta Was this translation helpful? Give feedback.
-
Touch V3.10d |
Beta Was this translation helpful? Give feedback.
-
hello, I absolutely recommend you to upgrade to 4.01
… Il giorno 14 feb 2023, alle ore 17:14, Jens314 ***@***.***> ha scritto:
Touch V3.10d
—
Reply to this email directly, view it on GitHub <#11 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A2LNND7YEE676BXKF2VDQVDWXOVMXANCNFSM6AAAAAAUYZIBNQ>.
You are receiving this because you commented.
|
Beta Was this translation helpful? Give feedback.
-
@Jens314 the issue seems to be that in the compatibility mode the values are all "Strings" and not "Numbers". I will check if I can find a workaround. |
Beta Was this translation helpful? Give feedback.
-
@Jens314 please try my new hot fix "v2.0.2". I updated also the read me that the compatibility mode is not supported/recommended. Please let me know if it is working now for you ... |
Beta Was this translation helpful? Give feedback.
-
Hab den Kommentar schon gelöscht, funktioniert auch so. Danke nochmal
Dominik Amann ***@***.***> schrieb am Mi. 15. Feb. 2023 um
19:52:
… @Jens314 <https://github.com/Jens314> why converting to float? I think
all the values are Integers in the JSON. So I converting "615" (String) to
615 (Integer). That's the hotfix. Then dividing 615 / 10 = 61,5 Degrees as
before.
—
Reply to this email directly, view it on GitHub
<#13 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A52ZH7R4NUKPLFE6H2FHL2LWXUQVTANCNFSM6AAAAAAU5GK4QM>
.
You are receiving this because you were mentioned.Message ID:
<dominikamann/oekofen-pellematic-compact/repo-discussions/13/comments/4986870
@github.com>
|
Beta Was this translation helpful? Give feedback.
-
Hi Dominik, thanks for this wonderful Integration. I have just started playing around and getting into all of this home assistant stuff. Anyway I managed to get things running and I can see the sensor values in HA, see picture. Unfortunately by factor 10x too high.
As I can see in your code at some point you are dividing the values by 10.
Do you have an idea what is going wrong here?
Thanks Jens
Beta Was this translation helpful? Give feedback.
All reactions