Welcome to EmuFlight Discussions! #477
Replies: 13 comments 8 replies
-
i just flew a few packs on emuflight an look for tuning notes to help understand more .motors are a little warm i made a few little trys of trying a slight tune.like hoe emu feels from beta just need guideince. an i would test also have 8 quads a7 inch 3 5inch little whoops |
Beta Was this translation helpful? Give feedback.
-
Thank you for your Emuflight development. I installed a Walksnail Kit V2 on a 5” quad with heliospring FC. Used your Emuflight Configurator and flashed FC. Initial flights went well, good Betaflight OSD. Now OSD is freezing First noticed frozen data in flight at 3 minute mark. Then after cycling power to quad same frozen data persisted. After cycling power to both quad and Tx (ELRS) no BF OSD at all. Later at home powered up and good OSD data reappeared, but when I armed the quad it froze again instantly, timer 2 at 0 seconds. |
Beta Was this translation helpful? Give feedback.
-
Emuflight 0.4.1 configurator (unstable)
EMUF 0.4.2 HELIOSPRING target (unstable)
OSD Video Format HD
Should it be set to PAL?
…On Wed, Feb 14, 2024 at 7:07 AM nerdCopter ***@***.***> wrote:
what git commit? (master?)
what configurator commit?
set PAL for Walksnail?
—
Reply to this email directly, view it on GitHub
<#477 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BGDG6CAYSNOAKOSCSLPDOPDYTTHMVAVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNBWG4YDQMI>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Thanks I’ll switch to OSD PAL and see if it is better. HD looks good with
the small font but freezes too much. As long as I can place data on the
screen where I want it I’ll be happy.
…On Wed, Feb 14, 2024 at 9:17 AM nerdCopter ***@***.***> wrote:
i believe so, this is what other Walksnail users have done for text
alignment.
for HelioSPring I suggest UART3 for MSP-Display-port. (or specifically not
UART1)
if you want MSP-Displayport be sure to use latest development builds:
I'm running HDZero (MSP-Displayport) on HelioSpring v1 without freezes.
using these two builds:
https://github.com/emuflight/dev-unstable/releases/tag/20240124.171109-hex
https://github.com/emuflight/dev-unstable/releases/tag/20240124.164604-cfg
—
Reply to this email directly, view it on GitHub
<#477 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BGDG6CBOVD3ZIXVWSTH4VUTYTTWULAVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNBWHEYTKOA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Oh yeah of course I tried to use UART1 first. Then I realized that could
not be done. No biggie.
…On Wed, Feb 14, 2024 at 9:17 AM nerdCopter ***@***.***> wrote:
i believe so, this is what other Walksnail users have done for text
alignment.
for HelioSPring I suggest UART3 for MSP-Display-port. (or specifically not
UART1)
if you want MSP-Displayport be sure to use latest development builds:
I'm running HDZero (MSP-Displayport) on HelioSpring v1 without freezes.
using these two builds:
https://github.com/emuflight/dev-unstable/releases/tag/20240124.171109-hex
https://github.com/emuflight/dev-unstable/releases/tag/20240124.164604-cfg
—
Reply to this email directly, view it on GitHub
<#477 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BGDG6CBOVD3ZIXVWSTH4VUTYTTWULAVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNBWHEYTKOA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
okay, i dont understand the freezes. but i do not have prior reports of freezing, nor do i have Walksnail for testing. |
Beta Was this translation helpful? Give feedback.
-
PID's for OSD? Way over my head but thank you. I will see if I can get a
PAL format Emuflight OSD in my Walksnail goggles and fly without having the
Emuflight OSD data freeze in the goggles. Just to be clear, The Walksnail
video and data is fine and I can continue flying, it is just the
Emuflight FC data like battery voltage, flight time, LQI and RSSI etc. that
freezes.
…On Thu, Feb 15, 2024 at 5:58 AM nerdCopter ***@***.***> wrote:
okay, i dont understand the freezes. but i do not have prior reports of
freezing, nor do i have Walksnail for testing.
you might consider a lower pid-loop, but i dont know for fact. i set my
pid denominator to 3 to fly at 10.67k pid/gyro loops.
—
Reply to this email directly, view it on GitHub
<#477 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BGDG6CGCQOFLEL5ZJHW4H4DYTYIAHAVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNBYGAZDCMA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Thanks, I joined github to send you my findings but had trouble navigating
it, to have a conversation. I will try Discord. I will let you know if PAL
solves the problem or if I can see how to change the PID loop frequency but
(like I suspect most of us modern flyers) I may just install a current FC.
I am more of a build and fly guy than a problem solver, LOL.
…On Fri, Feb 16, 2024 at 6:05 AM nerdCopter ***@***.***> wrote:
1. not PID's per se... "PID loop frequency in kilohertz". smaller
value will allow for more time for processes to finish and use less CPU
resources.
2. The PAL thing was needed in older builds, but maybe not this newer
build. i dont know as i cannot test, and pilots no longer providing
feedback. i encourage you to join Emuflight's Discord server for easier
communications, but not 100% necessary if you prefer not.
—
Reply to this email directly, view it on GitHub
<#477 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BGDG6CCTE6N7BMGWS6W7Z4LYT5RSVAVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNBZGMYDGNY>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I will, I'll let you know how it works out.
…On Fri, Feb 16, 2024 at 7:09 AM nerdCopter ***@***.***> wrote:
👍
try
image.png (view on web)
<https://github.com/emuflight/EmuFlight/assets/56646290/449c932f-210d-4fb2-82ca-47ca2a514bb4>
or try
image.png (view on web)
<https://github.com/emuflight/EmuFlight/assets/56646290/d6f3315f-1503-4e7a-9957-fa0e5e42ae0c>
—
Reply to this email directly, view it on GitHub
<#477 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BGDG6CHYIBTRO3KAFG4ZB6DYT5ZCFAVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNBZGM4DKMQ>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Awesome, thanks for the update!
…On Sat, Feb 17, 2024 at 10:50 AM nerdCopter ***@***.***> wrote:
i found a bug when i merged HD to master (but may have only affected
analog, unsure). master is fixed. i will build new hex, watch dev-unstable
repo. will take a couple hours.
—
Reply to this email directly, view it on GitHub
<#477 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BGDG6CEY3HGQDNQT7N5G4X3YUD3W3AVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNJQGI2DSNA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
FYI I tried the PID settings you gave me but with all three Configuration
PIDs the OSD is intermittent. Im starting to think the Heliospring FC or
Walksnail Kit may be to blame. The Walksnail is a new unit. Ill try your
new brew but it might be your work is fine and something else is the
problem.
Cheers!
On Sat, Feb 17, 2024 at 9:59 PM Eric Schellenberger ***@***.***>
wrote:
… Awesome, thanks for the update!
On Sat, Feb 17, 2024 at 10:50 AM nerdCopter ***@***.***>
wrote:
> i found a bug when i merged HD to master (but may have only affected
> analog, unsure). master is fixed. i will build new hex, watch dev-unstable
> repo. will take a couple hours.
>
> —
> Reply to this email directly, view it on GitHub
> <#477 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/BGDG6CEY3HGQDNQT7N5G4X3YUD3W3AVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNJQGI2DSNA>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
|
Beta Was this translation helpful? Give feedback.
-
I never used stick commands with Walksnail. Don't know how... I only ever
used them with analog vtx smart audio. FYI I have not tried your newest
software revision yet, been busy. I'll let you know if it works better (no
frozen OSD). Thanks!
…On Thu, Feb 29, 2024 at 8:42 AM nerdCopter ***@***.***> wrote:
Another user reports he cannot enter into OSD-menu with stick-command on
WlakSnail. Are you able?
—
Reply to this email directly, view it on GitHub
<#477 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BGDG6CF4T6OT3WVI22CUOLLYV5M6TAVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNRTGM2DAOA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Hey I wanted you to know I have started having the same video problems with
my other Walksnail equipped quads which are using current versions of
BetaFlight. Namely frozen OSD data and even frozen video (crashing!) it is
a bummer and I will have to send my Walksnail GogglesX back in for service.
I have to assume that your programming to allow HD OSD with Emuflight is
fine. The goggles appear to be at fault.
On Thu, Feb 29, 2024 at 1:16 PM Eric Schellenberger ***@***.***>
wrote:
… I never used stick commands with Walksnail. Don't know how... I only ever
used them with analog vtx smart audio. FYI I have not tried your newest
software revision yet, been busy. I'll let you know if it works better (no
frozen OSD). Thanks!
On Thu, Feb 29, 2024 at 8:42 AM nerdCopter ***@***.***>
wrote:
> Another user reports he cannot enter into OSD-menu with stick-command on
> WlakSnail. Are you able?
>
> —
> Reply to this email directly, view it on GitHub
> <#477 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/BGDG6CF4T6OT3WVI22CUOLLYV5M6TAVCNFSM4WXML2MKU5DIOJSWCZC7NNSXTOKENFZWG5LTONUW63SDN5WW2ZLOOQ5TQNRTGM2DAOA>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
|
Beta Was this translation helpful? Give feedback.
-
👋 Welcome!
We’re using Discussions as a place to connect with other members of our community. We hope that you:
EmuFlight testers wanted!
#testers-rollcall
channel.EmuFlight contributors wanted!
#contributors
channel as well.Beta Was this translation helpful? Give feedback.
All reactions