Merge tag 'v5.15.161' into 5.15-main

This is the 5.15.161 stable release

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAmZuzxsACgkQONu9yGCS
# aT5CsA/+Mg/+90PCIhz6IEG2Mg37TVNHlnYkHUGugnxt2KoV3LEdkfLFC22HVb+v
# QaBE+/+jU/1mNh4+LQAk5cMBdYfBbunr3e9nDPTtkbVmqsyg/wxgXhRByrL+7FWX
# g+UphmMj8QmL9pWxpTLx9p//J3yptCX/2vSABpd64WEJkET1JSHnmCy8WBWUKVZm
# iIOlA1HfIIQH9RFzHpDD02YzCjWmmTL9dLveqETVKSoGp0dHRk74WValz4yBwutV
# 602JAXGnICg7MEse9E4Y7Ikp1rx9Qxk2fdaKA2yZF0yRIpcEXYQPhGGcLaMyDYS4
# /SshWh0yshIaMAUPZ89dV902V69K8AlOe4FGjlOMGfhsKXMP2w01jVAiMsUlIFhV
# fN3bsQNKHi1sO1CVxZp6JBqZwFmGJRheQd69VthCy1R5rgdqy8x/xI5Le4GVDGBz
# b6Fp+EIYnplJheLGTAGdM5cCMa6s0ogItDwDdtCSQlsnvehCODfUyuEY4jRVN8Vb
# XjNUegb8i7fGeQIMpO+v66WpnwG0mXSpM9X7Dmija8F9YuNPs/YU1VghnnZ3clM0
# kvVo9As1LFnq8/+s0t9hUa2X7RF1VweJVA8ckfkHBr92Y4Ulspo+NEhxGmHJyWAy
# 1CyRMw0cnuarmjxVmHUhUrsld7vzctYfOrkyUwTgWOoxwbc6x0A=
# =ma+c
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun Jun 16 13:40:11 2024 CEST
# gpg:                using RSA key 647F28654894E3BD457199BE38DBBDC86092693E
# gpg: Can't check signature: No public key

Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml

@@ -37,15 +37,15 @@ properties:
       active low.
     maxItems: 1
 
-  dovdd-supply:
+  DOVDD-supply:
     description:
       Definition of the regulator used as interface power supply.
 
-  avdd-supply:
+  AVDD-supply:
     description:
       Definition of the regulator used as analog power supply.
 
-  dvdd-supply:
+  DVDD-supply:
     description:
       Definition of the regulator used as digital power supply.
 
@@ -59,9 +59,9 @@ required:
   - reg
   - clocks
   - clock-names
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
   - reset-gpios
   - port
 
@@ -82,9 +82,9 @@ examples:
                 clock-names = "xvclk";
                 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
-                dovdd-supply = <&sw2_reg>;
-                dvdd-supply = <&sw2_reg>;
-                avdd-supply = <&reg_peri_3p15v>;
+                DOVDD-supply = <&sw2_reg>;
+                DVDD-supply = <&sw2_reg>;
+                AVDD-supply = <&reg_peri_3p15v>;
 
                 port {
                         ov2680_to_mipi: endpoint {

Documentation/devicetree/bindings/pci/rcar-pci-host.yaml

@@ -68,6 +68,18 @@ properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
+  iommu-map: true
+  iommu-map-mask: true
+
 required:
   - compatible
   - reg
@@ -121,5 +133,7 @@ examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };

Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml

@@ -94,16 +94,18 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [emmc, emmc_rst]
+                  items:
+                    enum: [emmc, emmc_rst]
           - if:
               properties:
                 function:
                   const: eth
             then:
               properties:
                 groups:
-                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
-                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+                  items:
+                    enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                           rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
           - if:
               properties:
                 function:
@@ -120,10 +122,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
-                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
-                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
-                         i2s4_out_data]
+                  items:
+                    enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                           i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                           i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                           i2s4_out_data]
           - if:
               properties:
                 function:
@@ -156,10 +159,11 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
-                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
-                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
-                         pcie_wake, pcie_clkreq]
+                  items:
+                    enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                           pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                           pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                           pcie_wake, pcie_clkreq]
           - if:
               properties:
                 function:
@@ -175,11 +179,12 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
-                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
-                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
-                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
-                         pwm_ch7_0, pwm_0, pwm_1]
+                  items:
+                    enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                           pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                           pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                           pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                           pwm_ch7_0, pwm_0, pwm_1]
           - if:
               properties:
                 function:
@@ -257,33 +262,34 @@ patternProperties:
           pins:
             description: |
               An array of strings. Each string contains the name of a pin.
-            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
-                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
-                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
-                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
-                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
-                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
-                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
-                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
-                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
-                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
-                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
-                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
-                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
-                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
-                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
-                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
-                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
-                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
-                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
-                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
-                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
-                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
-                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
-                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
-                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
-                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
-                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+            items:
+              enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                     RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                     I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                     I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                     G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                     G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                     NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                     MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                     MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                     MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                     MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                     PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                     GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                     PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                     AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                     PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                     WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                     WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                     EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                     EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                     WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                     UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                     UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                     PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                     GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                     TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                     WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
 
           bias-disable: true
 

Documentation/devicetree/bindings/soc/rockchip/grf.yaml

@@ -141,6 +141,7 @@ allOf:
           unevaluatedProperties: false
 
         pcie-phy:
+          type: object
           description:
             Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 

Documentation/devicetree/bindings/sound/rt5645.txt

@@ -20,6 +20,11 @@ Optional properties:
   a GPIO spec for the external headphone detect pin. If jd-mode = 0,
   we will get the JD status by getting the value of hp-detect-gpios.
 
+- cbj-sleeve-gpios:
+  a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2
+  contacts to the ground or floating. It could avoid some electric noise from the
+  active speaker jacks.
+
 - realtek,in2-differential
   Boolean. Indicate MIC2 input are differential, rather than single-ended.
 
@@ -68,6 +73,7 @@ codec: rt5650@1a {
 	compatible = "realtek,rt5650";
 	reg = <0x1a>;
 	hp-detect-gpios = <&gpio 19 0>;
+	cbj-sleeve-gpios = <&gpio 20 0>;
 	interrupt-parent = <&gpio>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 	realtek,dmic-en = "true";

Documentation/driver-api/fpga/fpga-region.rst

@@ -46,10 +46,16 @@ API to add a new FPGA region
 ----------------------------
 
 * struct fpga_region - The FPGA region struct
-* devm_fpga_region_create() - Allocate and init a region struct
-* fpga_region_register() -  Register an FPGA region
+* struct fpga_region_info - Parameter structure for __fpga_region_register_full()
+* __fpga_region_register_full() -  Create and register an FPGA region using the
+  fpga_region_info structure to provide the full flexibility of options
+* __fpga_region_register() -  Create and register an FPGA region using standard
+  arguments
 * fpga_region_unregister() -  Unregister an FPGA region
 
+Helper macros ``fpga_region_register()`` and ``fpga_region_register_full()``
+automatically set the module that registers the FPGA region as the owner.
+
 The FPGA region's probe function will need to get a reference to the FPGA
 Manager it will be using to do the programming.  This usually would happen
 during the region's probe function.
@@ -75,11 +81,14 @@ following APIs to handle building or tearing down that list.
 .. kernel-doc:: include/linux/fpga/fpga-region.h
    :functions: fpga_region
 
+.. kernel-doc:: include/linux/fpga/fpga-region.h
+   :functions: fpga_region_info
+
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: devm_fpga_region_create
+   :functions: __fpga_region_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
-   :functions: fpga_region_register
+   :functions: __fpga_region_register
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_unregister

Documentation/networking/device_drivers/ethernet/amazon/ena.rst

@@ -205,6 +205,7 @@ Adaptive coalescing can be switched on/off through `ethtool(8)`'s
 More information about Adaptive Interrupt Moderation (DIM) can be found in
 Documentation/networking/net_dim.rst
 
+.. _`RX copybreak`:
 RX copybreak
 ============
 The rx_copybreak is initialized by default to ENA_DEFAULT_RX_COPYBREAK
@@ -315,3 +316,34 @@ Rx
 - The new SKB is updated with the necessary information (protocol,
   checksum hw verify result, etc), and then passed to the network
   stack, using the NAPI interface function :code:`napi_gro_receive()`.
+
+Dynamic RX Buffers (DRB)
+------------------------
+
+Each RX descriptor in the RX ring is a single memory page (which is either 4KB
+or 16KB long depending on system's configurations).
+To reduce the memory allocations required when dealing with a high rate of small
+packets, the driver tries to reuse the remaining RX descriptor's space if more
+than 2KB of this page remain unused.
+
+A simple example of this mechanism is the following sequence of events:
+
+::
+
+        1. Driver allocates page-sized RX buffer and passes it to hardware
+                +----------------------+
+                |4KB RX Buffer         |
+                +----------------------+
+
+        2. A 300Bytes packet is received on this buffer
+
+        3. The driver increases the ref count on this page and returns it back to
+           HW as an RX buffer of size 4KB - 300Bytes = 3796 Bytes
+               +----+--------------------+
+               |****|3796 Bytes RX Buffer|
+               +----+--------------------+
+
+This mechanism isn't used when an XDP program is loaded, or when the
+RX packet is less than rx_copybreak bytes (in which case the packet is
+copied out of the RX buffer into the linear part of a new skb allocated
+for it and the RX buffer remains the same size, see `RX copybreak`_).

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 160
+SUBLEVEL = 161
 EXTRAVERSION =
 NAME = Trick or Treat
 

arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi

@@ -58,7 +58,7 @@
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
-		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		      <0x0 0xf1002000 0x0 0x2000>;  /* GICC */
 		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;

arch/arm64/boot/dts/nvidia/tegra132-norrin.dts

@@ -9,8 +9,8 @@
 	compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/as3722@40";
-		rtc1 = "/rtc@7000e000";
+		rtc0 = &as3722;
+		rtc1 = &tegra_rtc;
 		serial0 = &uarta;
 	};
 

arch/arm64/boot/dts/nvidia/tegra132.dtsi

@@ -573,7 +573,7 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
+	tegra_rtc: rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/qcom/qcs404-evb.dtsi

@@ -60,7 +60,7 @@
 		vddrf-supply = <&vreg_l1_1p3>;
 		vddch0-supply = <&vdd_ch0_3p3>;
 
-		local-bd-address = [ 02 00 00 00 5a ad ];
+		local-bd-address = [ 00 00 00 00 00 00 ];
 
 		max-speed = <3200000>;
 	};

arch/arm64/include/asm/asm-bug.h

@@ -28,6 +28,7 @@
 	14470:	.long 14471f - 14470b;			\
 _BUGVERBOSE_LOCATION(__FILE__, __LINE__)		\
 		.short flags; 				\
+		.align 2;				\
 		.popsection;				\
 	14471:
 #else

arch/arm64/kvm/guest.c

@@ -250,6 +250,7 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		case PSR_AA32_MODE_SVC:
 		case PSR_AA32_MODE_ABT:
 		case PSR_AA32_MODE_UND:
+		case PSR_AA32_MODE_SYS:
 			if (!vcpu_el1_is_32bit(vcpu))
 				return -EINVAL;
 			break;
@@ -270,7 +271,7 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	if (*vcpu_cpsr(vcpu) & PSR_MODE32_BIT) {
 		int i, nr_reg;
 
-		switch (*vcpu_cpsr(vcpu)) {
+		switch (*vcpu_cpsr(vcpu) & PSR_AA32_MODE_MASK) {
 		/*
 		 * Either we are dealing with user mode, and only the
 		 * first 15 registers (+ PC) must be narrowed to 32bit.

arch/m68k/kernel/entry.S

@@ -430,7 +430,9 @@ resume:
 	movec	%a0,%dfc
 
 	/* restore status register */
-	movew	%a1@(TASK_THREAD+THREAD_SR),%sr
+	movew	%a1@(TASK_THREAD+THREAD_SR),%d0
+	oriw	#0x0700,%d0
+	movew	%d0,%sr
 
 	rts