Merge tag 'v6.1.83' into 6.1-main

Linux 6.1.83 # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAmYDTlsACgkQ3qZv95d3 # LNx2Pw/8DMFid77ao/8dNIIsldgMFxz+7GQwQCHGWcJOm0QJVX5h51n7pH9i8t7Y # gBbnitOnEq9Oo5mDHaowNQnmcR1oB7BWpM+wcEN2L1eGqJFVOj1f5MdloUY9OLcO # l9Mq6lM+uojxc02i3y/J6WwLUZNs+3iVLnv30CyU4pjnbBB8OBm2JFyF3p+nl9oa # QL/6cqeOBKwyRu+cvNWsRchrN+uGBk+2l6ufwPup2o+U4gLKhdVSjpmO4km+DjM2 # KnZ8Qy4enDYT9whrMJ8mACb13+qHLm/HiVZycqr253SsbeJ9H1LX02RvAKqzrmqQ # KwOTM/p1Fep7NdqeANSyTSj+mU5ZP/ScApqXiLzEDOgpW5IfgBmCdIhvlqeJwm3s # kVhLM7Cs6UZmJuMibCztnv12xFUZyd8W9gBVD7M1wy/ANScJzF7c9+OC7iqPZqRt # tGq4ngMYDEPy/eIKJUaa2b5m1K6jeCzCxjig5GyLjJpKBJWK6HJGJ9eQLixLpotr # uOqlzIEHtGBerm69CNQFLUUqvqc4fGqZKHEBeIYUKrhOR3+ILTEHb/eiKaaBjJaD # inor8t6OyXZsm+SuoRsQY5czmzrJJYa3towh5Ha8dNUS6HzCemLykQWX+AALpVZ8 # UKh1swqxX2xNk4CGA3tS/Ti096GCZUoXIVlf3dZ5ejGrw+ocT+4= # =2pYy # -----END PGP SIGNATURE----- # gpg: Signature made Tue Mar 26 23:38:19 2024 CET # gpg: using RSA key E27E5D8A3403A2EF66873BBCDEA66FF797772CDC # gpg: Can't check signature: No public key
frank-w · Jun 8, 2024 · b180893 · b180893
2 parents 5544fef + e5cd595
commit b180893
Show file tree

Hide file tree

Showing 476 changed files with 4,660 additions and 3,361 deletions.
diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 1
-SUBLEVEL = 82
+SUBLEVEL = 83
 EXTRAVERSION =
 NAME = Curry Ramen
 

diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -451,7 +451,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -106,8 +106,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
 	status = "okay";
 
@@ -120,17 +118,10 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
@@ -151,15 +142,30 @@
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1134,7 +1134,7 @@
 
 		qfprom: qfprom@fc4bc000 {
 			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
+			reg = <0xfc4bc000 0x2100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			tsens_calib: calib@d0 {

diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -209,6 +209,18 @@
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";

diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -450,17 +450,20 @@
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";

diff --git a/arch/arm/crypto/sha256_glue.c b/arch/arm/crypto/sha256_glue.c
@@ -24,32 +24,29 @@
 
 #include "sha256_glue.h"
 
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
+asmlinkage void sha256_block_data_order(struct sha256_state *state,
+					const u8 *data, int num_blks);
 
 int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 			     unsigned int len)
 {
 	/* make sure casting to sha256_block_fn() is safe */
 	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
 
-	return sha256_base_do_update(desc, data, len,
-				(sha256_block_fn *)sha256_block_data_order);
+	return sha256_base_do_update(desc, data, len, sha256_block_data_order);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_update);
 
 static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha256_base_do_finalize(desc,
-				(sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_finalize(desc, sha256_block_data_order);
 	return sha256_base_finish(desc, out);
 }
 
 int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
 			    unsigned int len, u8 *out)
 {
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_update(desc, data, len, sha256_block_data_order);
 	return crypto_sha256_arm_final(desc, out);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_finup);

diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c
@@ -25,27 +25,25 @@ MODULE_ALIAS_CRYPTO("sha512");
 MODULE_ALIAS_CRYPTO("sha384-arm");
 MODULE_ALIAS_CRYPTO("sha512-arm");
 
-asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks);
+asmlinkage void sha512_block_data_order(struct sha512_state *state,
+					u8 const *src, int blocks);
 
 int sha512_arm_update(struct shash_desc *desc, const u8 *data,
 		      unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	return sha512_base_do_update(desc, data, len, sha512_block_data_order);
 }
 
 static int sha512_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha512_base_do_finalize(desc,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_finalize(desc, sha512_block_data_order);
 	return sha512_base_finish(desc, out);
 }
 
 int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
 		     unsigned int len, u8 *out)
 {
-	sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_update(desc, data, len, sha512_block_data_order);
 	return sha512_arm_final(desc, out);
 }
 

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -291,6 +291,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -166,6 +166,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -406,6 +406,7 @@
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -655,10 +656,8 @@
 			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 			clock-names = "apb", "spdif";
 			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 

diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -145,7 +145,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;

diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -351,7 +351,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;

diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -180,9 +180,6 @@
 				brcm,num-gphy = <5>;
 				brcm,num-rgmii-ports = <2>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ports: ports {
 					#address-cells = <1>;
 					#size-cells = <0>;

diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -584,6 +584,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -442,6 +442,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -294,8 +294,8 @@
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -313,19 +313,19 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
@@ -337,40 +337,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };