Skip to content

Ubuntu 22.04 (Console) Boot Image (U-boot, Linux Kernel, Ubuntu RootFS) for Zynq MPSoC.

License

Notifications You must be signed in to change notification settings

ikwzm/ZynqMP-FPGA-Ubuntu22.04-Console

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

66 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ZynqMP-FPGA-Ubuntu22.04-Console

Overview

Introduction

This Repository provides a Ubuntu22.04-Console(CUI Only) for Zynq MPSoC.

Note

The Linux Kernel Image and Ubuntu22.04 RootFS provided in this repository is not official.

I modified it to my liking. Please handle with care.

Features

  • Hardware
    • Ultra96 : Xilinx Zynq UltraScale+ MPSoC development board based on the Linaro 96Boards specification.
    • Ultra96-V2 : updates and refreshes the Ultra96 product that was released in 2018.
    • KV260 : Kria KV260 Vision AI Startar Kit.
    • KR260 : Kria KR260 Robotics Startar Kit.
  • Boot Loader
    • FSBL(First Stage Boot Loader for ZynqMP)
    • PMU Firmware(Platform Management Unit Firmware)
    • BL31(ARM Trusted Firmware Boot Loader stage 3-1)
    • U-Boot xilinx-v2019.2 (customized)
  • Linux Kernel Version 6.1.70-zynqmp-fpga-trial
    • linux-stable 6.1.70
    • Patched equivalent to linux-xlnx v2022.2
    • Enable Device Tree Overlay with Configuration File System
    • Enable FPGA Manager
    • Enable FPGA Bridge
    • Enable FPGA Reagion
    • Enable ATWILC3000 Linux Driver for Ultra96-V2
    • Enable Lima(Open Source Mali-400 Device Driver)
      • Patch to lima for multiple clocks
      • Patch to lima for multiple interrupt names
      • Patch to lima for alternative device tree ID
      • Patch to xlnx_drm for default alignment size
      • Patch to xlnx_drm for enable data cache
    • Other config -> files/config-6.1.70-zynqmp-fpga-trial-2
  • Ubuntu22.04.x(jammy) Console(CUI Only) Root File System

Release

Release Released Ubuntu Version Linux Kernel Version Release Tag
v3.0.1 2024-1-13 Ubuntu 22.04.3 6.1.70-zynqmp-fpga-trial-2 v3.0.1
v1.2.0 2023-7-31 Ubuntu 22.04.2 6.1.42-zynqmp-fpga-trial-1 v1.2.0
v1.1.2 2023-5-10 Ubuntu 22.04.2 5.15.108-zynqmp-fpga-trial-2 v1.1.2
v1.0.0 2022-9-30 Ubuntu 22.04.1 5.10.120-zynqmp-fpga-trial-16 v1.0.0

Install

Install to SD-Card

Setup Ultra96/Ultra96-V2/KV260 borad

  • Put the SD-Card in the slot on Ultra96/Ultra96-V2/KV260/KR260.

Ultra96/Ultra96-V2

  • Plug in a UART to PS UART1 ports of the Ultra96/Ultra96-V2.

KV260/KR260

  • Plug in a UART-USB Adapter to Micro USB UART/JTAG ports of the KV260/KR260.

Starting Ultra96/Ultra96-V2/KV260 board

  • Turn on the Ultra96/Ultra96-V2/KV260.
  • After a few seconds, the Ubuntu login propmpt will appear on the system console.
  • Your username is "fpga". Password is set to "fpga". Please login.
  • The username and password for administrator rights is "admin".

FAQ

Build