Skip to content

Latest commit

 

History

History
214 lines (149 loc) · 10.1 KB

ollama_quickstart.md

File metadata and controls

214 lines (149 loc) · 10.1 KB
Raw

Run Ollama with IPEX-LLM on Intel GPU

ollama/ollama is popular framework designed to build and run language models on a local machine; you can now use the C++ interface of ipex-llm as an accelerated backend for ollama running on Intel GPU (e.g., local PC with iGPU, discrete GPU such as Arc, Flex and Max).

See the demo of running LLaMA2-7B on Intel Arc GPU below.

You could also click here to watch the demo video.

Note

ipex-llm[cpp]==2.2.0b20240826 is consistent with v0.1.39 of ollama.

Our current version is consistent with v0.3.6 of ollama.

Table of Contents

Quickstart

1. Install IPEX-LLM for Ollama

IPEX-LLM's support for ollama now is available for Linux system and Windows system.

Visit Run llama.cpp with IPEX-LLM on Intel GPU Guide, and follow the instructions in section Prerequisites to setup and section Install IPEX-LLM cpp to install the IPEX-LLM with Ollama binaries.

After the installation, you should have created a conda environment, named llm-cpp for instance, for running ollama commands with IPEX-LLM.

2. Initialize Ollama

Activate the llm-cpp conda environment and initialize Ollama by executing the commands below. A symbolic link to ollama will appear in your current directory.

  • For Linux users:

    conda activate llm-cpp
init-ollama

  • For Windows users:

    Please run the following command with administrator privilege in Miniforge Prompt.

    conda activate llm-cpp
init-ollama.bat

Note

If you have installed higher version ipex-llm[cpp] and want to upgrade your ollama binary file, don't forget to remove old binary files first and initialize again with init-ollama or init-ollama.bat.

Now you can use this executable file by standard ollama's usage.

3. Run Ollama Serve

You may launch the Ollama service as below:

  • For Linux users:

    export OLLAMA_NUM_GPU=999
export no_proxy=localhost,127.0.0.1
export ZES_ENABLE_SYSMAN=1
source /opt/intel/oneapi/setvars.sh
export SYCL_CACHE_PERSISTENT=1
# [optional] under most circumstances, the following environment variable may improve performance, but sometimes this may also cause performance degradation
export SYCL_PI_LEVEL_ZERO_USE_IMMEDIATE_COMMANDLISTS=1
# [optional] if you want to run on single GPU, use below command to limit GPU may improve performance
export ONEAPI_DEVICE_SELECTOR=level_zero:0

./ollama serve

  • For Windows users:

    Please run the following command in Miniforge Prompt.

    set OLLAMA_NUM_GPU=999
set no_proxy=localhost,127.0.0.1
set ZES_ENABLE_SYSMAN=1
set SYCL_CACHE_PERSISTENT=1
rem under most circumstances, the following environment variable may improve performance, but sometimes this may also cause performance degradation
set SYCL_PI_LEVEL_ZERO_USE_IMMEDIATE_COMMANDLISTS=1

ollama serve

Note

Please set environment variable OLLAMA_NUM_GPU to 999 to make sure all layers of your model are running on Intel GPU, otherwise, some layers may run on CPU.

Note

To allow the service to accept connections from all IP addresses, use OLLAMA_HOST=0.0.0.0 ./ollama serve instead of just ./ollama serve.

Tip

When your machine has multi GPUs and you want to run on one of them, you need to set ONEAPI_DEVICE_SELECTOR=level_zero:[gpu_id], here [gpu_id] varies based on your requirement. For more details, you can refer to this section.

Note

The environment variable SYCL_PI_LEVEL_ZERO_USE_IMMEDIATE_COMMANDLISTS determines the usage of immediate command lists for task submission to the GPU. While this mode typically enhances performance, exceptions may occur. Please consider experimenting with and without this environment variable for best performance. For more details, you can refer to this article.

The console will display messages similar to the following:

4. Pull Model

Keep the Ollama service on and open another terminal and run ./ollama pull <model_name> in Linux (ollama.exe pull <model_name> in Windows) to automatically pull a model. e.g. dolphin-phi:latest:

5. Using Ollama

Using Curl

Using curl is the easiest way to verify the API service and model. Execute the following commands in a terminal. Replace the <model_name> with your pulled model, e.g. dolphin-phi.

  • For Linux users:

    curl http://localhost:11434/api/generate -d '
{ 
   "model": "<model_name>", 
   "prompt": "Why is the sky blue?", 
   "stream": false
}'

  • For Windows users:

    Please run the following command in Miniforge Prompt.

    curl http://localhost:11434/api/generate -d "
{
   \"model\": \"<model_name>\",
   \"prompt\": \"Why is the sky blue?\",
   \"stream\": false
}"

Using Ollama Run GGUF models

Ollama supports importing GGUF models in the Modelfile, for example, suppose you have downloaded a mistral-7b-instruct-v0.1.Q4_K_M.gguf from Mistral-7B-Instruct-v0.1-GGUF, then you can create a file named Modelfile:

FROM ./mistral-7b-instruct-v0.1.Q4_K_M.gguf
TEMPLATE [INST] {{ .Prompt }} [/INST]
PARAMETER num_predict 64

Then you can create the model in Ollama by ollama create example -f Modelfile and use ollama run to run the model directly on console.

  • For Linux users:

    export no_proxy=localhost,127.0.0.1
./ollama create example -f Modelfile
./ollama run example

  • For Windows users:

    Please run the following command in Miniforge Prompt.

    set no_proxy=localhost,127.0.0.1
ollama create example -f Modelfile
ollama run example

An example process of interacting with model with ollama run example looks like the following:

Troubleshooting

1. Unable to run the initialization script

If you are unable to run init-ollama.bat, please make sure you have installed ipex-llm[cpp] in your conda environment. If you have installed it, please check if you have activated the correct conda environment. Also, if you are using Windows, please make sure you have run the script with administrator privilege in prompt terminal.

2. Why model is always loaded again after several minutes

Ollama will unload model from gpu memory in every 5 minutes as default. For latest version of ollama, you could set OLLAMA_KEEP_ALIVE=-1 to keep the model loaded in memory. Reference issue: #11608

3. exit status 0xc0000135 error when executing ollama serve

When executing ollama serve, if you meet llama runner process has terminated: exit status 0xc0000135 on Windows or you meet ollama_llama_server: error while loading shared libraries: libmkl_core.so.2: cannot open shared object file on Linux, this is most likely caused by the lack of sycl dependency. Please check:

  1. if you have installed conda and if you are in the right conda environment which has pip installed oneapi dependencies on Windows
  2. if you have executed source /opt/intel/oneapi/setvars.sh on Linux

4. Program hang during initial model loading stage

When launching ollama serve for the first time on Windows, it may get stuck during the model loading phase. If you notice that the program is hanging for a long time during the first run, you can manually input a space or other characters on the server side to ensure the program is running.

5. How to distinguish the community version of Ollama from the ipex-llm version of Ollama

In the server log of community version of Ollama, you may see source=payload_common.go:139 msg="Dynamic LLM libraries [rocm_v60000 cpu_avx2 cuda_v11 cpu cpu_avx]". But in the server log of ipex-llm version of Ollama, you should only see source=payload.go:44 msg="Dynamic LLM libraries [cpu cpu_avx cpu_avx2]".

6. Ollama hang when multiple different questions is asked or context is long

If you find ollama hang when multiple different questions is asked or context is long, and you see update_slots : failed to free spaces in the KV cache in the server log, this could be because that sometimes the LLM context is larger than the default n_ctx value, you may increase the n_ctx and try it again.