Skip to content
/ gpio Public

GPIO abstraction using the linux sysfs interface, mainly for Raspberry PI.

License

Notifications You must be signed in to change notification settings

iqb/gpio

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

50 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

PHP GPIO abstraction

GPIO abstraction using the linux sysfs interface, mainly for Raspberry PI.

Installation

Just put the following in your composer.json file inside your project root. No stable version exists so far.

"require": {
  "iqb/gpio": "*@dev"
}

Features

  • Pin class: abstraction of a single GPIO pin
  • LCD class: abstraction of a HD44780 compatible 16x2 display
  • PinEmulator class: mock replacement for Pin class
  • Emulator class: uses PinEmulators to make GPIO using software testable!

GPIO pin abstraction

The Pin class provides a simple interface to GPIO pins/ports. It uses the userspace GPIO interface provided by the linux kernel below /sys/class/gpio and so will obviously not work on other operating systems. It is developed on Raspbian Wheezy.

The linux kernel identifies the GPIO pins by numbers. They can be found using the BCM value of the gpio readall (you need WiringPi for the command to exist).

namespace iqb\gpio;

// Will open the GPIO pin with BCM number 17 = physical pin 11
$pin = new Pin(17);

// A pin must be enabled so it can be used.
// Pin-consumers like the LCD class enable pins themselves when they use them 
$pin->enable();

// Pin is in output mode
$pin->setDirection(Pin::DIRECTION_OUT);

// and the pin is now enabled (sending a 1)
$pin->setValue(true);

// Pin is in input mode now
$pin->setDirection(Pin::DIRECTION_IN);

// Enable edge detection.
// This feature is required to detect changes of the value.
$pin->setEdge(Pin::EDGE_BOTH);

// Read the current value
$value = $pin->getValue();

// We can wait for a change of the pin value using stream_select()
// We need to initialize the file handle sets we want to monitor.
// Changes to GPIO pins are "exceptional" (out of band) events
// so we need the third set of handles.
$read = [];
$write = [];
$except = [$pin->getValueHandle()];
while (true) {
  if (-1 === stream_select($read, $write, $except, 60)) { continue; }
  
  echo "Value changed: " . ($pin->getValue() ? '1' : '0') . "\n";  
}

HD44780 compatible 16x2 display abstraction

This display is connected via 6 GPIO pins.

namespace iqb\gpio;

// Create the display, the pins are the actual used pins from my personal project
// You don't need to enable the pins or set the direction,
// that is done by the LCD class.
$lcd = new LCD(
  new Pin(7),
  new Pin(8),
  new Pin(25),
  new Pin(24),
  new Pin(23),
  new Pin(18)
);

// Enable the pins, set the direction, send some magic commands to the display ...
$lcd->initialize();

// Write something in the first line
$lcd->writeString('abcdefghijklmnop', 1);
// Write something in the second line
$lcd->writeString('0123456789012345', 2);

About

GPIO abstraction using the linux sysfs interface, mainly for Raspberry PI.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages