Skip to content

A library for NXP's MFRC630 NFC IC.

License

Notifications You must be signed in to change notification settings

iwanders/MFRC630

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

20 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

MFRC630

This is a library for NXP's MFRC630 NFC and reader IC. It is likely that it also works for other IC's in the same family, such as the CLRC663, MFRC631, MFRC630 and SLRC610. The library is platform independent and is likely to work on many different microcontrollers, it is known to work on the Arduino compatible Teensy and on an STM32F0xx chip.

Design

The library itself is written in C, it requires the chip to be connected to the SPI interface, furthermore, it can only deal with a single chip that's connected to the microcontroller. The library does not require time or delay functions neither does it need an interrupt pin, all that is required is the SPI bus. The handling of timeouts is done by using one of the chip's timers.

The library is clearly structured, providing functionality from low level to higher level:

  • HAL: Three functions are to be created to allow the library to interact with the SPI bus.

  • Register interaction: The adresses for all registers are provided as define statements, functions for FIFO reading and writing are available, as well as reading and writing normal registers. For various important registers there are additional define statements available that make it easier to interact with these.

  • Commands: The chip can be instructed to execute various commands, these functions provide wrappers for these and handle the arguments required for each command.

  • ISO14443A: Provides the necessities from ISO14443a to interact with RFID tags: the REQA, WUPA and SELECT procedure (with collision handling) to determine the UID(s).

  • MIFARE: Provides functions to authenticate, read and write blocks on MIFARE cards.

Documentation

The header files are annotated with Doxygen-style comments, running make doxygen in the documentation folder will output the documentation in html form. Additionally, running make will also generate output using Breathe.

An example for an Arduino compatible board is provided as well as some pointers for use on an STM32 microcontroller.

Miscellaneous

This chip seems to be significantly less popular than the MFRC522, if you are starting with RFID, that might be a better choice to use, as there is a well-tested library for that chip.

I came across this chip when I was repurposing off-the-shelf hardware to do my bidding; Surprisingly, no library was available for this chip. Improvements / additional examples are welcome.

License

MIT License, see LICENSE.txt.

Copyright (c) 2016 Ivor Wanders

About

A library for NXP's MFRC630 NFC IC.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages