Status

Replacing this with lots of links. See Board Revision Notes for details on the few board revisions that predate the issues. (Maybe I'll transfer them into github issues, so this can all be consistent)

• ★ means the board is at least roughly usable
• ✗ indicates the board is unusable and should NOT be fabricated

Presence of a rev design issue doesn't mean the previous rev is bad, there just needs to be a place to keep everything that needs to be done to the next rev so it isn't lost.

End product boards

These would actually go into a finished product

Main board

It is assumed that a rev 2 will be necessary.

• Rev 1 Design, Bringup
• Rev 0 ★ Design, Bringup

ADC Board

• Rev 2 ★ Design, Bringup
• Rev 1 ★ Design, Bringup
• Rev 0 ★ Bringup

Sensor board

• Rev 0 ★

LED power board

• Rev 3 Design
• Rev 2 ★ Design, Bringup
  • Didn't test the MCP23017 functionality, but everything else was fine
• Rev 1 ★ Design, Bringup
• Rev 0 ✗

MIDI board

• Rev 1 Design, Bringup
• Rev 0 ★ Design, Bringup

Pedal board

It is expected that a rev 2 will be necessary.

• Rev 1 Design, Bringup
• Rev 0 Design, Bringup

Networking board

• Rev 0 Design

Development/test-only boards

These are only used for development of the above boards, or for testing their correct operation, and don't actually go into a finished product

Link Adapter

• Rev 1 Design
• Rev 0 ★

Sensor Test

• Rev 1 Design
• Rev 0 ★

LED test bar

• Rev 0 ★