-
Notifications
You must be signed in to change notification settings - Fork 22
Support as Http server and the Websockets server on Arduino DUE #1
Comments
Thanks for your interest in the library. Currently, SAM DUE is not supported. The WebSockets Server for many other boards is still not ready. I'm in the process of porting the WebSockets library to Teensy, SAM DUE and STM32 running with W5x00, ENC28J60 and WiFiNINA, as well as make WebSockets Server working in those supported boards. I think by next week, the new version will have those features added. But I can't promise everything is working as planned. The library will hopefully provide the WebSocket Server feature for the SAM DUE, but you have to write the application to use the feature for your purpose (SD Card, HTTP Server, etc.). |
Hello, |
Some preliminary good news for SAM DUE, Teensy and STM32F The WebSocket Server example has just been compiled smoothly, but it needs some important mods in the Arduino hardware package. Still need some more tests to see if anything is broken. If you're willing to test, I'll post some fixes for you here early next week to have something to start working on. |
Good news. Just posted the new release v2.2.2 New in v2.2.2
Remember to follows instructions in Important Notes to add support to SAM DUE The Generic_WebSocketServerAllFunctionsDemo_W5500 example will show you how to run both EthernetWebServer and WebSockets Server for Generic boards (including SAM DUE) with W5x00 Ethernet. Please post your test results if OK. Good luck, |
Hello,
Tanks for the good news.
I will make test as soon als i can.
regards
Jake
Gesendet: Dienstag, 26. Mai 2020 um 05:43 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
Hi @jakespeed1311
Good news. Just posted the new release v2.2.2
New in v2.2.2
Add support to Teensy boards, such as Teensy 4.1, 4.0. 3.6, 3.5, 3.2/3.1, 3.0, LC..
Add support to STM32 (Nucleo-144, Nucleo-64, Nucleo-32, Discovery, STM32F1, STM32F3, STM32F4, STM32H7, STM32L0, etc.).
Add support to SAM DUE
Add WebSocketServer examples to those supported boards.
Remember to follows instructions in
Important Notes to add support to SAM DUE
The Generic_WebSocketServerAllFunctionsDemo_W5500 example will show you how to run both EthernetWebServer and WebSockets Server for Generic boards (including SAM DUE) with W5x00 Ethernet.
Please post your test results if OK.
Good luck,
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
Hello,
i hope i can reach you on this way. My email [email protected]
1. i Use the normal http server from Arduino, you are using an better i know but i must cange all my work. Do the websock work with the standart arduino lib ?
2. I cant compile the Generic_WebsocketServer_W5500 demo from Ver. 2.2.2 i uses Arduino IDE 1.8.12
I havent checked the library in function so i wondering about the warnigns
3. I work with the latest ethernet libraty 2.0 because i work W5500 and W5100 cards
Please give me an hint.
Jake
```
+++++++++ begin output
Arduino: 1.8.12 (Windows 10), Board: "Arduino Due (Programming Port)"
C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\admin\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\admin\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries -fqbn=arduino:sam:arduino_due_x_dbg -vid-pid=0X2341_0X003D -ide-version=10812 -build-path C:\Users\admin\AppData\Local\Temp\arduino_build_359102 -warnings=default -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.bossac.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.bossac-1.6.1-arduino.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -verbose C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\examples\Generic\W5500\Generic_WebSocketServer_W5500\Generic_WebSocketServer_W5500.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\admin\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\admin\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries -fqbn=arduino:sam:arduino_due_x_dbg -vid-pid=0X2341_0X003D -ide-version=10812 -build-path C:\Users\admin\AppData\Local\Temp\arduino_build_359102 -warnings=default -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.bossac.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.bossac-1.6.1-arduino.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -verbose C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\examples\Generic\W5500\Generic_WebSocketServer_W5500\Generic_WebSocketServer_W5500.ino
Using board 'arduino_due_x_dbg' from platform in folder: C:\Users\admin\AppData\Local\Arduino15\packages\arduino\hardware\sam\1.6.12
Using core 'arduino' from platform in folder: C:\Users\admin\AppData\Local\Arduino15\packages\arduino\hardware\sam\1.6.12
Detecting libraries used...
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\sketch\\Generic_WebSocketServer_W5500.ino.cpp" -o nul
Alternatives for WebSocketsServer_Generic.h: [[email protected]]
ResolveLibrary(WebSocketsServer_Generic.h)
-> candidates: [[email protected]]
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\sketch\\Generic_WebSocketServer_W5500.ino.cpp" -o nul
Alternatives for Ethernet.h: [[email protected]]
ResolveLibrary(Ethernet.h)
-> candidates: [[email protected]]
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\sketch\\Generic_WebSocketServer_W5500.ino.cpp" -o nul
Alternatives for SPI.h: [[email protected]]
ResolveLibrary(SPI.h)
-> candidates: [[email protected]]
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\sketch\\Generic_WebSocketServer_W5500.ino.cpp" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src\\libsha1\\libsha1.c" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\Dhcp.cpp" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\Dns.cpp" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\Ethernet.cpp" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\EthernetClient.cpp" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\EthernetServer.cpp" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\EthernetUdp.cpp" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\socket.cpp" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\utility\\w5100.cpp" -o nul
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src\\SPI.cpp" -o nul
Generating function prototypes...
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\sketch\\Generic_WebSocketServer_W5500.ino.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\preproc\\ctags_target_for_gcc_minus_e.cpp"
"C:\\Program Files (x86)\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\preproc\\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\sketch\\Generic_WebSocketServer_W5500.ino.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\sketch\\Generic_WebSocketServer_W5500.ino.cpp.o"
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\src/WebSocketsServer_Generic.h:43:0,
from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\examples\Generic\W5500\Generic_WebSocketServer_W5500\Generic_WebSocketServer_W5500.ino:26:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\src/WebSockets_Generic.h:59:6: warning: #warning Undef min/max in WebSockets_Generic [-Wcpp]
#warning Undef min/max in WebSockets_Generic
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\src/WebSocketsServer_Generic.h:43:0,
from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\examples\Generic\W5500\Generic_WebSocketServer_W5500\Generic_WebSocketServer_W5500.ino:26:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\src/WebSockets_Generic.h:180:4: warning: #warning Use SAM DUE in WebSockets_Generic [-Wcpp]
#warning Use SAM DUE in WebSockets_Generic
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\src/WebSockets_Generic.h:527:0,
from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\src/WebSocketsServer_Generic.h:43,
from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\examples\Generic\W5500\Generic_WebSocketServer_W5500\Generic_WebSocketServer_W5500.ino:26:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets_Generic-master\src/WebSockets_Generic-Impl.h:53:6: warning: #warning No CORE_HAS_LIBB64 [-Wcpp]
#warning No CORE_HAS_LIBB64
^
Compiling libraries...
Compiling library "WebSockets_Generic-master"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src\\libsha1\\libsha1.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\WebSockets_Generic-master\\libsha1\\libsha1.c.o"
Compiling library "Ethernet"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\EthernetClient.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\Ethernet\\EthernetClient.cpp.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\Dns.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\Ethernet\\Dns.cpp.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\Ethernet.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\Ethernet\\Ethernet.cpp.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\Dhcp.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\Ethernet\\Dhcp.cpp.o"
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\EthernetClient.cpp:24:0:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:75:2: warning: #warning Use 14MHz clock for W5100/W5200/W5500. Slow. [-Wcpp]
#warning Use 14MHz clock for W5100/W5200/W5500. Slow.
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:502:2: warning: #warning Use SAM3 architecture [-Wcpp]
#warning Use SAM3 architecture
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\Ethernet.cpp:48:0:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:75:2: warning: #warning Use 14MHz clock for W5100/W5200/W5500. Slow. [-Wcpp]
#warning Use 14MHz clock for W5100/W5200/W5500. Slow.
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:502:2: warning: #warning Use SAM3 architecture [-Wcpp]
#warning Use SAM3 architecture
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\Dns.cpp:8:0:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:75:2: warning: #warning Use 14MHz clock for W5100/W5200/W5500. Slow. [-Wcpp]
#warning Use 14MHz clock for W5100/W5200/W5500. Slow.
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:502:2: warning: #warning Use SAM3 architecture [-Wcpp]
#warning Use SAM3 architecture
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\Dhcp.cpp:7:0:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:75:2: warning: #warning Use 14MHz clock for W5100/W5200/W5500. Slow. [-Wcpp]
#warning Use 14MHz clock for W5100/W5200/W5500. Slow.
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:502:2: warning: #warning Use SAM3 architecture [-Wcpp]
#warning Use SAM3 architecture
^
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\EthernetServer.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\Ethernet\\EthernetServer.cpp.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\EthernetUdp.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\Ethernet\\EthernetUdp.cpp.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\socket.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\Ethernet\\socket.cpp.o"
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\EthernetServer.cpp:48:0:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:75:2: warning: #warning Use 14MHz clock for W5100/W5200/W5500. Slow. [-Wcpp]
#warning Use 14MHz clock for W5100/W5200/W5500. Slow.
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:502:2: warning: #warning Use SAM3 architecture [-Wcpp]
#warning Use SAM3 architecture
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\EthernetUdp.cpp:32:0:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:75:2: warning: #warning Use 14MHz clock for W5100/W5200/W5500. Slow. [-Wcpp]
#warning Use 14MHz clock for W5100/W5200/W5500. Slow.
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:502:2: warning: #warning Use SAM3 architecture [-Wcpp]
#warning Use SAM3 architecture
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\socket.cpp:23:0:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:75:2: warning: #warning Use 14MHz clock for W5100/W5200/W5500. Slow. [-Wcpp]
#warning Use 14MHz clock for W5100/W5200/W5500. Slow.
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility/w5100.h:502:2: warning: #warning Use SAM3 architecture [-Wcpp]
#warning Use SAM3 architecture
^
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src\\utility\\w5100.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\Ethernet\\utility\\w5100.cpp.o"
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility\w5100.cpp:48:0:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility\w5100.h:75:2: warning: #warning Use 14MHz clock for W5100/W5200/W5500. Slow. [-Wcpp]
#warning Use 14MHz clock for W5100/W5200/W5500. Slow.
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility\w5100.h:502:2: warning: #warning Use SAM3 architecture [-Wcpp]
#warning Use SAM3 architecture
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility\w5100.cpp:124:2: warning: #warning w5100.cpp Use fallback, change SS_PIN_DEFAULT to 10 [-Wcpp]
#warning w5100.cpp Use fallback, change SS_PIN_DEFAULT to 10
^
Compiling library "SPI"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src\\SPI.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\libraries\\SPI\\SPI.cpp.o"
Compiling core...
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x\\variant.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\variant.cpp.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -x assembler-with-cpp -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\wiring_pulse_asm.S" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\wiring_pulse_asm.S.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\cortex_handlers.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\cortex_handlers.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\hooks.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\hooks.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\iar_calls_sam3.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\iar_calls_sam3.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\WInterrupts.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\WInterrupts.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\itoa.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\itoa.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\syscalls_sam3.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\syscalls_sam3.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\wiring.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\wiring.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\wiring_analog.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\wiring_analog.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\wiring_digital.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\wiring_digital.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\wiring_shift.c" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_359102\\core\\wiring_shift.c.o"
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-gcc" -c -g -Os -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10812 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino\\avr\\dtostrf.c" -o "C:\\Users\\admin\\AppData\\Loca
```
|
hi,
@khoih-prog
I found one mistake from me i overseen to change the due platform.txt cange. Sorry.
Now i try to test.
tx
Jake
Gesendet: Dienstag, 26. Mai 2020 um 05:43 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
Hi @jakespeed1311
Good news. Just posted the new release v2.2.2
New in v2.2.2
Add support to Teensy boards, such as Teensy 4.1, 4.0. 3.6, 3.5, 3.2/3.1, 3.0, LC..
Add support to STM32 (Nucleo-144, Nucleo-64, Nucleo-32, Discovery, STM32F1, STM32F3, STM32F4, STM32H7, STM32L0, etc.).
Add support to SAM DUE
Add WebSocketServer examples to those supported boards.
Remember to follows instructions in
Important Notes to add support to SAM DUE
The Generic_WebSocketServerAllFunctionsDemo_W5500 example will show you how to run both EthernetWebServer and WebSockets Server for Generic boards (including SAM DUE) with W5x00 Ethernet.
Please post your test results if OK.
Good luck,
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
Hope you're OK now. This is my compile result of the same example for SAM DUE
|
Hello,
I hope you're okay. I was able to compile the webserver and it works.
Unfortunately I can't make the Generic_WebSocketServerAllFunctionsDemo_W5500.ino
to get it running. The web page is displayed, but I cannot open a websock with Chrome/Firefox.
Maybe you can test it again - something I am doing wrong. Unfortunately I can't get any further.
Tanks for your help.
lg
Jake
Serial Monitor:
19:45:48.647 -> 0 Connected websocket clients ping: 1
19:45:49.004 ->
19:45:49.004 -> Start Generic_WebSocketServerAllFunctionsDemo_W5500
19:45:49.004 -> [SETUP] BOOT WAIT 4
19:45:49.988 -> [SETUP] BOOT WAIT 3
19:45:51.005 -> [SETUP] BOOT WAIT 2
19:45:52.000 -> [SETUP] BOOT WAIT 1
19:45:53.574 ->
19:45:53.574 -> W5100 init, using SS_PIN_DEFAULT = 10, new ss_pin = 10, W5100Class::ss_pin = 10
19:45:53.574 -> W5100::init: W5100, SSIZE =4096
19:45:53.574 -> WebSockets Server IP address: 192.168.0.111
19:45:58.533 -> [WS] 4 [handleHeader] Header read fin.
19:45:58.533 -> [ETHERNET_WEBSERVER] request handler not found
19:45:58.979 -> 0 Connected websocket clients ping: 1
I get this error in my browser:
(index):1 WebSocket connection to 'ws://192.168.0.111:81/' failed: Error during WebSocket handshake: Unexpected response code: 400
(anonymous) @ (index):1
(index):1 WebSocket Error
Event
bubbles: false
cancelBubble: false
cancelable: false
composed: false
currentTarget: WebSocket {url: "ws://192.168.0.111:81/", readyState: 3, bufferedAmount: 0, onopen: ƒ, onerror: ƒ, ...}
defaultPrevented: false
eventPhase: 0
isTrusted: true
path: []
returnValue: true
srcElement: WebSocket {url: "ws://192.168.0.111:81/", readyState: 3, bufferedAmount: 0, onopen: ƒ, onerror: ƒ, ...}
target: WebSocket {url: "ws://192.168.0.111:81/", readyState: 3, bufferedAmount: 0, onopen: ƒ, onerror: ƒ, ...}
timeStamp: 89.90000002086163
type: "error"
__proto__: Event
|
The WebSockets Server currently has severe bug, and currently is not working. I think you got the similar issue as the other 2 issues I'm working on that now. But the outcome and time frame to fix is not determined, and can be quite long. If you can find another quicker solution, I suggest you go with that. |
Hi,
ok, tanks. I am not shure iam not know the protocol in deep. But i will try my best i want to use the server on the DUE.
if i find out i let you know.
Greedings
Jake
Gesendet: Samstag, 06. Juni 2020 um 21:34 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
Hi @jakespeed1311
The WebSockets Server currently has severe bug, and currently is not working.
I think you got the same issue as the other 2 issues
No free space new client / Counting of clients wrong?
Major issue with WiFiNINA - Arduino IoT 33
I'm working on that now. But the outcome and time frame to fix is not determined, and can be quite long. If you can find another quicker solution, I suggest you go with that.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
Hello,
i checked up the lib and i mean that the client always get an new number.
So the filling of the array is wrong.
Bu i am not able to fix. I mean that in handle new clients should be an part like this to keep the client number.
void WebSocketsServer::handleNewClients(void)
{
#if (WEBSOCKETS_NETWORK_TYPE == NETWORK_W5100)
while( client.available());
{
#endif
...
but there is no client.available function as it in ethernetclient is definded.
Yes i have to learn that but today i have no change to fix this. if this is the problem.
this is the debug output ans some prints from mee to understand the program.
An if i am right after the [WS] is the client number, but this must be static.
Tanks
Jake
10:59:51.152 ->
10:59:51.152 -> Start Generic_WebSocketServerAllFunctionsDemo_W5500
10:59:51.152 -> [SETUP] BOOT WAIT 4
10:59:52.150 -> [SETUP] BOOT WAIT 3
10:59:53.148 -> [SETUP] BOOT WAIT 2
10:59:54.135 -> [SETUP] BOOT WAIT 1
10:59:55.729 ->
10:59:55.729 -> W5100 init, using SS_PIN_DEFAULT = 10, new ss_pin = 10, W5100Class::ss_pin = 10
10:59:55.729 -> W5100::init: W5100, SSIZE =4096
10:59:55.729 -> WebSockets Server IP address: 192.168.0.111
10:59:59.670 -> [WS] 0 [handleHeader] Header Komplett RX: GET / HTTP/1.1
10:59:59.670 -> get ist da
10:59:59.670 -> [WS] 0 index: 3
10:59:59.670 -> -------
10:59:59.670 -> [WS] 0 cURL:
10:59:59.670 -> 3
10:59:59.670 -> [WS] 0 cURL: /
10:59:59.670 -> [WS] 0 URL: GET / HTTP/1.1
10:59:59.670 -> [WS] 0 [handleHeader] Header Komplett RX: Host: 192.168.0.111:91
10:59:59.704 -> [WS] 1 [handleHeader] Header Komplett RX: Connection: Upgrade
10:59:59.704 -> connection
10:59:59.704 -> upgrade
10:59:59.704 -> [WS] 1 cIsUpgrade : 1
10:59:59.704 -> [WS] 0 [handleHeader] Header Komplett RX: Pragma: no-cache
10:59:59.704 -> [WS] 1 [handleHeader] Header Komplett RX: Cache-Control: no-cache
10:59:59.704 -> [WS] 2 [handleHeader] Header Komplett RX: User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/83.0.4103.97 Safari/537.36
10:59:59.704 -> [WS] 0 [handleHeader] Header Komplett RX: Upgrade: websocket
10:59:59.739 -> upgrade
10:59:59.739 -> websocket
10:59:59.739 -> is socket
10:59:59.739 -> [WS] 1 [handleHeader] Header Komplett RX: Origin: http://192.168.0.111
10:59:59.739 -> [WS] 2 [handleHeader] Header Komplett RX: Sec-WebSocket-Version: 13
10:59:59.739 -> version
10:59:59.739 -> gwebsocket
10:59:59.739 -> [WS] 3 [handleHeader] Header Komplett RX: Accept-Encoding: gzip, deflate
10:59:59.739 -> [WS] 0 [handleHeader] Header Komplett RX: Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
10:59:59.774 -> [WS] 1 [handleHeader] Header Komplett RX: Sec-WebSocket-Key: 8PJC8Z75BzzAiwNWzCa6Aw==
10:59:59.774 -> cKey da
10:59:59.774 -> [WS] 2 [handleHeader] Header Komplett RX: Sec-WebSocket-Extensions: permessage-deflate; client_max_window_bits
10:59:59.774 -> headerValue
10:59:59.774 -> [WS] 3 [handleHeader] Header Komplett RX: Sec-WebSocket-Protocol: arduino
10:59:59.774 -> headerValue
10:59:59.774 -> [WS] 4 [handleHeader] Header read fin.
10:59:59.774 -> [WS] 4 [handleHeader] - cURL:
10:59:59.774 -> [WS] 4 [handleHeader] - cIsUpgrade: 0
10:59:59.808 -> [WS] 4 [handleHeader] - cIsWebsocket: 0
10:59:59.808 -> [WS] 4 [handleHeader] - cKey:
10:59:59.808 -> [WS] 4 [handleHeader] - cProtocol:
10:59:59.808 -> [WS] 4 [handleHeader] - cExtensions:
10:59:59.808 -> [WS] 4 [handleHeader] - cVersion: 0
10:59:59.808 -> [WS] 4 [handleHeader] - base64Authorization:
10:59:59.808 -> [WS] 4 [handleHeader] - cHttpHeadersValid: 0
10:59:59.808 -> [WS] 4 [handleHeader] - cMandatoryHeadersCount: 0
10:59:59.840 -> 0
10:59:59.840 -> [handleHeader] Websocket connection incoming.
10:59:59.840 -> shakey:258EAFA5-E914-47DA-95CA-C5AB0DC85B11
10:59:59.840 -> runCbEvent(
Gesendet: Samstag, 06. Juni 2020 um 21:34 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
Hi @jakespeed1311
The WebSockets Server currently has severe bug, and currently is not working.
I think you got the same issue as the other 2 issues
No free space new client / Counting of clients wrong?
Major issue with WiFiNINA - Arduino IoT 33
I'm working on that now. But the outcome and time frame to fix is not determined, and can be quite long. If you can find another quicker solution, I suggest you go with that.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
Thanks for your help. The same issue also happens while using other Ethernet/WiFi such as WiFiNINA, etc. |
Hello,
I'm trying to fix it for the due, but unfortunately I don't understand what exactly is going wrong.
I was thinking about asking Paul Stoffregen for help, he is the one who developed the Ethernet lib.
The lib should always have the same client ID.
But like I said I'm just learning the whole thing.
If you should get further, that would be great, I can test it anyway.
greetings
Jake
Gesendet: Montag, 08. Juni 2020 um 16:24 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
Hi @jakespeed1311
Thanks for your help. The same issue also happens while using other Ethernet/WiFi such as WiFiNINA, etc.
I'm narrow it down to the same client number issue, but still haven't had a solution yet.
Any more help will be appreciated.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
Please try the new WebSockets2_Generic Library I believe there is no WebSocket Server issue as this WebSockets_Generic Library. This is terminal debug output when running SAMDUE-Ethernet-Server on SAM DUE board with Ethernet W5100 shield using EthernetLarge library, and receiving WebSockets connection from an ESP8266 board.
Why do we need this WebSockets2_Generic libraryMany Web services require WebSockets library, which is so far written only for ESP8266/ESP32 boards. The ESP boards so far rely on the Markus Sattler's WebSockets Library to connect to Alexa via Sinric or SinricPro skills. This WebSockets2_Generic library is based on and modified from Gil Maimon's ArduinoWebSockets Library to provide support to many more boards, such as Arduino SAMD21, Adafruit SAMD21/SAMD51, nRF52, STM32, Teensy, SAM DUE, etc. and enable those boards to use WebSockets services, including voice-control Alexa along with Blynk. Those supported boards can also run WebSockets Server. The WebSockets can be used with ESP’s WiFi, WiFiNINA, W5x00/ENC28J60/LAN8742A Ethernet, ESP8266/ESP32-AT modules/shields. New in v1.0.1
New in v1.0.0
|
Hello,
i am trying to modify the Examble Generic_WebSocketSeverAllFunctionsDemo_W550 to run with the Websockets2 library.
But i missed something so i dont get it wo work.
I have an Webserver running with he website that starts the websocket. And the websockserver that is sending data to the wsclient that was opend from the Website.
But i can't get it wo work.
Can you please help with this examble.
tx
Jake
|
You can start from this modified sketch for SAM-DUE and WebSockets2_Generic Library. You have to spend more time to improve it. Currently the modifications are just to show you how to make it working basically. I'm sorry I can't spend more time to solve your issue.
This is the Ethernet WebServer screen This is the terminal output when 2 WS clients
are connected to the SAM_DUE WS Server.
|
Hello,
i tested now, sorry for the delay. But i don't get it working complete.
First the websock on port 8080 was resonding, i test only with chrome ip:8080 so no real client but an output on the Terminal.
The http server was not responding, i checked agin the ethernet2 lib and Ardunino mods and there are well.
Then i tryed the EterhnetWebServer example to see if its working, and yes that do.
I chekced the ip fixed and the dhcp.. but no luck with the Http screen.
The Server is not responding, i can't see that he will send data.
I only modified the ip in defines.h and have a w5100 sheld.
Then i removed the ws server config and i see the html site.
So now both work but not togehter.
Ethernetwebserver 1.0.11
Websock2 1.05
Eternet2 + patcg 2.0
I run Arduino IDE 1.8.12
I used the lib/packets mods from Websock2
Tanks for your help.
greedings
Jake
|
I'm testing here and seeing both EthernetWebServer and WebSocketsServer working simultaneously. Try this code and see
Using the same EthernetWebServer @ 192.168.2 93:80WebSocketServer at the same time @ 192.168.2 93:8080
|
Hi,
today i try everithing to fix the problem. But no luck.
I download and patched all, i read the manuals again. Http/ and WS Server.
Again the webserver demo is running fine. The Websock do respont test from an Chrome plugin.
Is there an option to set in http server ? To get both working.
I'm kind of desperate now.
16:29:22.385 ->
16:29:22.385 -> Starting WebSockets2_Generic SAMDUE-Ethernet_ServerAllFunctionsDemo on NMCSAM DUE
16:29:22.385 -> Ethernet using W5x00 and Ethernet Library
16:29:22.432 -> [SETUP] BOOT WAIT 4
16:29:23.423 -> [SETUP] BOOT WAIT 3
16:29:24.407 -> [SETUP] BOOT WAIT 2
16:29:25.423 -> [SETUP] BOOT WAIT 1
16:29:26.982 ->
16:29:26.982 -> W5100 init, using SS_PIN_DEFAULT = 10, new ss_pin = 10, W5100Class::ss_pin = 10
16:29:26.982 -> W5100::init: W5500, SSIZE =4096
16:29:26.982 -> WebSockets Server IP address: 192.168.2.95
16:29:26.982 -> WebSockets Server Running and Ready on SAM DUE
16:29:26.982 -> IP address: 192.168.2.95, Port: 8080
16:31:48.306 -> [WS] WebsocketsServer::recvHandshakeRequest: value = 192.168.2.95:8080
16:31:48.306 -> [WS] WebsocketsServer::recvHandshakeRequest: value = Upgrade
16:31:48.306 -> [WS] WebsocketsServer::recvHandshakeRequest: value = no-cache
16:31:48.340 -> [WS] WebsocketsServer::recvHandshakeRequest: value = no-cache
16:31:48.340 -> [WS] WebsocketsServer::recvHandshakeRequest: value = Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/84.0.4147.105 Safari/537.36
16:31:48.340 -> [WS] WebsocketsServer::recvHandshakeRequest: value = websocket
16:31:48.340 -> [WS] WebsocketsServer::recvHandshakeRequest: value = chrome-extension://mdmlhchldhfnfnkfmljgeinlffmdgkjo
16:31:48.374 -> [WS] WebsocketsServer::recvHandshakeRequest: value = 13
16:31:48.374 -> [WS] WebsocketsServer::recvHandshakeRequest: value = gzip, deflate
16:31:48.374 -> [WS] WebsocketsServer::recvHandshakeRequest: value = de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
16:31:48.374 -> [WS] WebsocketsServer::recvHandshakeRequest: value = wKB6SmeYBrzZihXFi/Mhxg==
16:31:48.374 -> [WS] WebsocketsServer::recvHandshakeRequest: value = permessage-deflate; client_max_window_bits
Her is my Arduino Output.
C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\admin\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\admin\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries -fqbn=arduino:sam:arduino_due_x_dbg -vid-pid=2341_003D -ide-version=10813 -build-path C:\Users\admin\AppData\Local\Temp\arduino_build_157696 -warnings=default -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.bossac.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.bossac-1.6.1-arduino.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino -verbose C:\Nextcloud\Eisenbahn_Fremo\Test2\_testkhoih\testeth\testeth.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\admin\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\admin\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries -fqbn=arduino:sam:arduino_due_x_dbg -vid-pid=2341_003D -ide-version=10813 -build-path C:\Users\admin\AppData\Local\Temp\arduino_build_157696 -warnings=default -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.arm-none-eabi-gcc.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\arm-none-eabi-gcc\4.8.3-2014q1 -prefs=runtime.tools.bossac.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino -prefs=runtime.tools.bossac-1.6.1-arduino.path=C:\Users\admin\AppData\Local\Arduino15\packages\arduino\tools\bossac\1.6.1-arduino -verbose C:\Nextcloud\Eisenbahn_Fremo\Test2\_testkhoih\testeth\testeth.ino
Using board 'arduino_due_x_dbg' from platform in folder: C:\Users\admin\AppData\Local\Arduino15\packages\arduino\hardware\sam\1.6.12
Using core 'arduino' from platform in folder: C:\Users\admin\AppData\Local\Arduino15\packages\arduino\hardware\sam\1.6.12
Detecting libraries used...
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10813 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\sketch\\testeth.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for Ethernet.h: [[email protected]]
ResolveLibrary(Ethernet.h)
-> candidates: [[email protected]]
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10813 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\sketch\\testeth.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for WebSockets2_Generic.h: [[email protected]]
ResolveLibrary(WebSockets2_Generic.h)
-> candidates: [[email protected]]
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10813 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets2_Generic-master\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\sketch\\testeth.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for EthernetWebServer.h: [[email protected]]
ResolveLibrary(EthernetWebServer.h)
-> candidates: [[email protected]]
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10813 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets2_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\EthernetWebServer\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\sketch\\testeth.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Alternatives for functional-vlpp.h: [[email protected]]
ResolveLibrary(functional-vlpp.h)
-> candidates: [[email protected]]
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10813 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets2_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\EthernetWebServer\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Functional-Vlpp\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\sketch\\testeth.ino.cpp" -o nul -DARDUINO_LIB_DISCOVERY_PHASE
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\Dhcp.cpp
Alternatives for SPI.h: [[email protected]]
ResolveLibrary(SPI.h)
-> candidates: [[email protected]]
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\Dns.cpp
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\Ethernet.cpp
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\EthernetClient.cpp
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\EthernetServer.cpp
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\EthernetUdp.cpp
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\socket.cpp
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet\src\utility\w5100.cpp
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\EthernetWebServer\src\libb64\cdecode.c
Using cached library dependencies for file: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\EthernetWebServer\src\libb64\cencode.c
Using cached library dependencies for file: C:\Users\admin\AppData\Local\Arduino15\packages\arduino\hardware\sam\1.6.12\libraries\SPI\src\SPI.cpp
Generating function prototypes...
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -w -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -w -x c++ -E -CC -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10813 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets2_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\EthernetWebServer\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Functional-Vlpp\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\sketch\\testeth.ino.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\preproc\\ctags_target_for_gcc_minus_e.cpp" -DARDUINO_LIB_DISCOVERY_PHASE
"C:\\Program Files (x86)\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\preproc\\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -c -g -Os -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -mcpu=cortex-m3 -mthumb -DF_CPU=84000000L -DARDUINO=10813 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON "-DUSB_MANUFACTURER=\"Arduino LLC\"" "-DUSB_PRODUCT=\"Arduino Due\"" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/libsam" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/CMSIS/Include/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\system/CMSIS/Device/ATMEL/" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\cores\\arduino" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Ethernet\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\WebSockets2_Generic-master\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\EthernetWebServer\\src" "-IC:\\Nextcloud\\Eisenbahn_Fremo\\arduino_Work\\libraries\\Functional-Vlpp\\src" "-IC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\libraries\\SPI\\src" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\sketch\\testeth.ino.cpp" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\sketch\\testeth.ino.cpp.o"
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/WebSockets2_Generic.h:29:0,
from C:\Nextcloud\Eisenbahn_Fremo\Test2\_testkhoih\testeth\testeth.ino:3:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/Tiny_Websockets_Generic/message.hpp:44:6: warning: #warning WEBSOCKETS_USE_ETHERNET in message.hpp [-Wcpp]
#warning WEBSOCKETS_USE_ETHERNET in message.hpp
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/Tiny_Websockets_Generic/message.hpp:45:0,
from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/WebSockets2_Generic.h:29,
from C:\Nextcloud\Eisenbahn_Fremo\Test2\_testkhoih\testeth\testeth.ino:3:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/Tiny_Websockets_Generic/internals/ws_common_Ethernet_W5x00.hpp:91:6: warning: #warning Using Ethernet for SAM DUE in ws_common_Ethernet_W5x00.hpp [-Wcpp]
#warning Using Ethernet for SAM DUE in ws_common_Ethernet_W5x00.hpp
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/Tiny_Websockets_Generic/internals/ws_common_Ethernet_W5x00.hpp:96:0,
from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/Tiny_Websockets_Generic/message.hpp:45,
from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/WebSockets2_Generic.h:29,
from C:\Nextcloud\Eisenbahn_Fremo\Test2\_testkhoih\testeth\testeth.ino:3:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/Tiny_Websockets_Generic/network/DUE_Ethernet_W5x00/DUE_Ethernet_W5x00_tcp.hpp:48:4: warning: #warning Using default Ethernet Lib in DUE_Ethernet_tcp.hpp [-Wcpp]
#warning Using default Ethernet Lib in DUE_Ethernet_tcp.hpp
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/WebSockets2_Generic.h:30:0,
from C:\Nextcloud\Eisenbahn_Fremo\Test2\_testkhoih\testeth\testeth.ino:3:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/Tiny_Websockets_Generic/client.hpp:50:6: warning: #warning WEBSOCKETS_USE_ETHERNET in client.hpp [-Wcpp]
#warning WEBSOCKETS_USE_ETHERNET in client.hpp
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/WebSockets2_Generic.h:31:0,
from C:\Nextcloud\Eisenbahn_Fremo\Test2\_testkhoih\testeth\testeth.ino:3:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master\src/Tiny_Websockets_Generic/server.hpp:45:6: warning: #warning WEBSOCKETS_USE_ETHERNET in server.hpp [-Wcpp]
#warning WEBSOCKETS_USE_ETHERNET in server.hpp
^
In file included from C:\Nextcloud\Eisenbahn_Fremo\Test2\_testkhoih\testeth\testeth.ino:5:0:
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\EthernetWebServer\src/EthernetWebServer.h:68:2: warning: #warning Use SAM_DUE architecture from EthernetWebServer [-Wcpp]
#warning Use SAM_DUE architecture from EthernetWebServer
^
C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\EthernetWebServer\src/EthernetWebServer.h:88:2: warning: #warning Use Ethernet library from EthernetWebServer [-Wcpp]
#warning Use Ethernet library from EthernetWebServer
^
Compiling libraries...
Compiling library "Ethernet"
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\Ethernet\EthernetClient.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\Ethernet\Dhcp.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\Ethernet\Ethernet.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\Ethernet\Dns.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\Ethernet\EthernetServer.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\Ethernet\EthernetUdp.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\Ethernet\socket.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\Ethernet\utility\w5100.cpp.o
Compiling library "WebSockets2_Generic-master"
Compiling library "EthernetWebServer"
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\EthernetWebServer\libb64\cencode.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\EthernetWebServer\libb64\cdecode.c.o
Compiling library "Functional-Vlpp"
Compiling library "SPI"
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\libraries\SPI\SPI.cpp.o
Compiling core...
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\variant.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\wiring_pulse_asm.S.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\iar_calls_sam3.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\hooks.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\itoa.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\syscalls_sam3.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\cortex_handlers.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\WInterrupts.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\wiring_analog.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\wiring.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\avr\dtostrf.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\wiring_digital.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\wiring_shift.c.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\RingBuffer.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\Reset.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\Stream.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\IPAddress.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\Print.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\UARTClass.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\WMath.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\abi.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\new.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\USARTClass.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\WString.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\watchdog.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\USB\PluggableUSB.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\wiring_pulse.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\USB\CDC.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\main.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\USB\USBCore.cpp.o
Using previously compiled file: C:\Users\admin\AppData\Local\Temp\arduino_build_157696\core\core.a
Linking everything together...
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-g++" -mcpu=cortex-m3 -mthumb -Os -Wl,--gc-sections "-TC:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x/linker_scripts/gcc/flash.ld" "-Wl,-Map,C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696/testeth.ino.map" -o "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696/testeth.ino.elf" "-LC:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696" -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--start-group -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\sketch\\testeth.ino.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\Ethernet\\Dhcp.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\Ethernet\\Dns.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\Ethernet\\Ethernet.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\Ethernet\\EthernetClient.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\Ethernet\\EthernetServer.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\Ethernet\\EthernetUdp.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\Ethernet\\socket.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\Ethernet\\utility\\w5100.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\EthernetWebServer\\libb64\\cdecode.c.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\EthernetWebServer\\libb64\\cencode.c.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\libraries\\SPI\\SPI.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696\\core\\variant.cpp.o" "C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\hardware\\sam\\1.6.12\\variants\\arduino_due_x/libsam_sam3x8e_gcc_rel.a" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696/core\\core.a" -Wl,--end-group -lm -lgcc
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-objcopy" -O binary "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696/testeth.ino.elf" "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696/testeth.ino.bin"
Using library Ethernet at version 2.0.0 in folder: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Ethernet
Using library WebSockets2_Generic-master at version 1.0.5 in folder: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\WebSockets2_Generic-master
Using library EthernetWebServer at version 1.0.11 in folder: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\EthernetWebServer
Using library Functional-Vlpp at version 1.0.1 in folder: C:\Nextcloud\Eisenbahn_Fremo\arduino_Work\libraries\Functional-Vlpp
Using library SPI at version 1.0 in folder: C:\Users\admin\AppData\Local\Arduino15\packages\arduino\hardware\sam\1.6.12\libraries\SPI
"C:\\Users\\admin\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\4.8.3-2014q1/bin/arm-none-eabi-size" -A "C:\\Users\\admin\\AppData\\Local\\Temp\\arduino_build_157696/testeth.ino.elf"
Sketch uses 116108 bytes (22%) of program storage space. Maximum is 524288 bytes.
Atmel SMART device 0x285e0a60 found
Erase flash
done in 0.036 seconds
Write 119124 bytes to flash (466 pages)
Gesendet: Mittwoch, 05. August 2020 um 08:17 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
I'm glad it's going well, but unfortunately I can't make it work. I feel a little stupid.
Gesendet: Mittwoch, 05. August 2020 um 17:04 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
Running more than 8hrs continuously and both EthernetServer and WebSocketsServer are still OK
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
HI,
i removed the websoc code
/* WebsocketsClient client = SocketsServer.accept();
if (client.available())
{
WebsocketsMessage msg = client.readBlocking();
// log
Serial.print("Got Message: ");
Serial.println(msg.data());
// return echo
client.send("Echo: " + msg.data());
// close the connection
client.close();
}*/
and the webserver runs. When i add the code and enable the serial output s /W then the loop ends with one W after that it ends.
But the websock lock like to run, or never coms back.
i add an serial print in look to see whats happen.
Serial.println(runEthernetServer);
And after this WebsocketsClient client = SocketsServer.accept();
Serial.println("Ww"); was not printed out.
also the webservwer was never answering.
I think that is the point to go in the websockets lib, i am right ?
due output
19:44:11.838 ->
19:44:11.838 -> Starting WebSockets2_Generic SAMDUE-Ethernet_ServerAllFunctionsDemo on NMCSAM DUE
19:44:11.838 -> Ethernet using W5x00 and Ethernet Library
19:44:11.838 -> [SETUP] BOOT WAIT 4
19:44:12.821 -> [SETUP] BOOT WAIT 3
19:44:13.839 -> [SETUP] BOOT WAIT 2
19:44:14.822 -> [SETUP] BOOT WAIT 1
19:44:16.415 ->
19:44:16.415 -> W5100 init, using SS_PIN_DEFAULT = 10, new ss_pin = 10, W5100Class::ss_pin = 10
19:44:16.415 -> W5100::init: W5500, SSIZE =4096
19:44:16.415 -> WebSockets Server IP address: 192.168.2.95
19:44:16.415 -> WebSockets Server Running and Ready on SAM DUE
19:44:16.415 -> IP address: 192.168.2.95, Port: 8080
19:44:16.415 -> 1
19:44:16.415 -> S
19:44:16.415 -> 2
19:44:16.415 -> S
19:44:16.415 -> 3
19:44:16.415 -> S
19:44:16.415 -> 4
19:44:16.415 -> S
19:44:16.415 -> 5
19:44:16.415 -> S
19:44:16.415 -> 6
19:44:16.415 -> S
19:44:16.415 -> 7
19:44:16.415 -> S
19:44:16.415 -> 8
19:44:16.415 -> S
19:44:16.415 -> 9
19:44:16.415 -> S
19:44:16.415 -> 10
19:44:16.415 -> S
19:44:16.415 -> 11
19:44:16.415 -> S
19:44:16.415 -> 12
19:44:16.415 -> S
19:44:16.415 -> 13
19:44:16.415 -> S
19:44:16.415 -> 14
19:44:16.415 -> S
19:44:16.415 -> 15
19:44:16.415 -> S
19:44:16.415 -> 16
19:44:16.415 -> S
19:44:16.415 -> 17
19:44:16.415 -> S
19:44:16.448 -> 18
19:44:16.448 -> S
19:44:16.448 -> 19
19:44:16.448 -> S
19:44:16.448 -> 20
19:44:16.448 -> S
19:44:16.448 -> 21
19:44:16.448 -> S
19:44:16.448 -> 22
19:44:16.448 -> S
19:44:16.448 -> 23
19:44:16.448 -> S
19:44:16.448 -> 24
19:44:16.448 -> S
19:44:16.448 -> 25
19:44:16.448 -> S
19:44:16.448 -> 26
19:44:16.448 -> S
19:44:16.448 -> 27
19:44:16.448 -> S
19:44:16.448 -> 28
19:44:16.448 -> S
19:44:16.448 -> 29
19:44:16.448 -> S
19:44:16.448 -> 30
19:44:16.448 -> S
19:44:16.448 -> 31
19:44:16.448 -> S
19:44:16.448 -> 32
19:44:16.448 -> S
19:44:16.448 -> 33
19:44:16.448 -> S
19:44:16.448 -> 34
19:44:16.448 -> S
19:44:16.448 -> 35
19:44:16.448 -> S
19:44:16.448 -> 36
19:44:16.448 -> S
19:44:16.448 -> 37
19:44:16.448 -> S
19:44:16.448 -> 38
19:44:16.448 -> S
19:44:16.448 -> 39
19:44:16.448 -> S
19:44:16.448 -> 40
19:44:16.448 -> S
19:44:16.448 -> 41
19:44:16.448 -> S
19:44:16.448 -> 42
19:44:16.448 -> S
19:44:16.448 -> 43
19:44:16.448 -> S
19:44:16.448 -> 44
19:44:16.448 -> S
19:44:16.448 -> 45
19:44:16.448 -> S
19:44:16.448 -> 46
19:44:16.448 -> S
19:44:16.448 -> 47
19:44:16.448 -> S
19:44:16.448 -> 48
19:44:16.448 -> S
19:44:16.448 -> 49
19:44:16.448 -> S
19:44:16.448 -> 50
19:44:16.448 -> S
19:44:16.448 -> 51
19:44:16.448 -> S
19:44:16.448 -> 52
19:44:16.448 -> S
19:44:16.448 -> 53
19:44:16.448 -> S
19:44:16.448 -> 54
19:44:16.448 -> S
19:44:16.448 -> 55
19:44:16.448 -> S
19:44:16.448 -> 56
19:44:16.448 -> S
19:44:16.448 -> 57
19:44:16.448 -> S
19:44:16.448 -> 58
19:44:16.448 -> S
19:44:16.448 -> 59
19:44:16.448 -> S
19:44:16.448 -> 60
19:44:16.448 -> S
19:44:16.448 -> 61
19:44:16.448 -> S
19:44:16.448 -> 62
19:44:16.448 -> S
19:44:16.448 -> 63
19:44:16.448 -> S
19:44:16.448 -> 64
19:44:16.448 -> S
19:44:16.448 -> 65
19:44:16.448 -> S
19:44:16.448 -> 66
19:44:16.448 -> S
19:44:16.448 -> 67
19:44:16.448 -> S
19:44:16.448 -> 68
19:44:16.448 -> S
19:44:16.448 -> 69
19:44:16.448 -> S
19:44:16.448 -> 70
19:44:16.448 -> S
19:44:16.483 -> 71
19:44:16.483 -> S
19:44:16.483 -> 72
19:44:16.483 -> S
19:44:16.483 -> 73
19:44:16.483 -> S
19:44:16.483 -> 74
19:44:16.483 -> S
19:44:16.483 -> 75
19:44:16.483 -> S
19:44:16.483 -> 76
19:44:16.483 -> S
19:44:16.483 -> 77
19:44:16.483 -> S
19:44:16.483 -> 78
19:44:16.483 -> S
19:44:16.483 -> 79
19:44:16.483 -> S
19:44:16.483 -> 80
19:44:16.483 -> S
19:44:16.483 -> 81
19:44:16.483 -> S
19:44:16.483 -> 82
19:44:16.483 -> S
19:44:16.483 -> 83
19:44:16.483 -> S
19:44:16.483 -> 84
19:44:16.483 -> S
19:44:16.483 -> 85
19:44:16.483 -> S
19:44:16.483 -> 86
19:44:16.483 -> S
19:44:16.483 -> 87
19:44:16.483 -> S
19:44:16.483 -> 88
19:44:16.483 -> S
19:44:16.483 -> 89
19:44:16.483 -> S
19:44:16.483 -> 90
19:44:16.483 -> S
19:44:16.483 -> 91
19:44:16.483 -> S
19:44:16.483 -> 92
19:44:16.483 -> S
19:44:16.483 -> 93
19:44:16.483 -> S
19:44:16.483 -> 94
19:44:16.483 -> S
19:44:16.483 -> 95
19:44:16.483 -> S
19:44:16.483 -> 96
19:44:16.483 -> S
19:44:16.483 -> 97
19:44:16.483 -> S
19:44:16.483 -> 98
19:44:16.483 -> S
19:44:16.483 -> 99
19:44:16.483 -> S
19:44:16.483 -> 0
19:44:16.483 -> W
loop ends her
ino file without handle and drawgrap() that's not need
#include "defines.h"
#include <WebSockets2_Generic.h>
#include <EthernetWebServer.h>
using namespace websockets2_generic;
WebsocketsServer SocketsServer;
#define WEBSOCKETS_PORT 8080
EthernetWebServer server(80);
int reqCount = 0; // number of requests received
void setup()
{
#if (USE_ETHERNET_LIB || USE_ETHERNET2_LIB || USE_ETHERNET_LARGE_LIB)
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH); // Deselect the SD card
#endif
Serial.begin(115200);
while (!Serial);
Serial.println("\nStarting WebSockets2_Generic SAMDUE-Ethernet_ServerAllFunctionsDemo on NMC" + String(BOARD_NAME));
Serial.println("Ethernet using " + String(ETHERNET_TYPE));
for (uint8_t t = 4; t > 0; t--)
{
Serial.println("[SETUP] BOOT WAIT " + String(t));
Serial.flush();
delay(1000);
}
// start the ethernet connection and the server:
// Use Static IP
Ethernet.begin(mac, serverIP);
//Configure IP address via DHCP
//Ethernet.begin(mac);
// server address, port and URL
Serial.print("WebSockets Server IP address: ");
Serial.println(Ethernet.localIP());
// SocketsServer.listen(WEBSOCKETS_PORT);
Serial.print(SocketsServer.available() ? "WebSockets Server Running and Ready on " : "Server Not Running on ");
Serial.println(BOARD_NAME);
Serial.print("IP address: ");
Serial.print(Ethernet.localIP());
Serial.print(", Port: ");
Serial.println(WEBSOCKETS_PORT); // Websockets Server Port
server.on("/", handleRoot);
server.on("/test.svg", drawGraph);
server.on("/inline", []()
{
server.send(200, "text/plain", "This works as well");
});
server.onNotFound(handleNotFound);
server.begin();
}
void loop()
{
// ( Times to run EthernetServer / Times to run WebSocketServer ) + 1
// NUM_TIMES larger => EthernetServer more responsive and WebSocketServer less responsive
#define NUM_TIMES 100
static uint8_t runEthernetServer = 0;
runEthernetServer = (runEthernetServer + 1) % NUM_TIMES;
Serial.println(runEthernetServer);
if (runEthernetServer != 0)
{
Serial.println("S");
server.handleClient();
return;
}
else
{
Serial.println("W");
WebsocketsClient client = SocketsServer.accept();
Serial.println("Ww");
/*
if (client.available())
{
WebsocketsMessage msg = client.readBlocking();
// log
Serial.print("Got Message: ");
Serial.println(msg.data());
// return echo
client.send("Echo: " + msg.data());
// close the connection
client.close();
}*/
}
}
define.h
/****************************************************************************************************************************
defines.h
For SAM DUE with Ethernet module/shield.
Based on and modified from Gil Maimon's ArduinoWebsockets library https://github.com/gilmaimon/ArduinoWebsockets
to support STM32F/L/H/G/WB/MP1, nRF52 and SAMD21/SAMD51 boards besides ESP8266 and ESP32
The library provides simple and easy interface for websockets (Client and Server).
Built by Khoi Hoang https://github.com/khoih-prog/Websockets2_Generic
Licensed under MIT license
Version: 1.0.5
Version Modified By Date Comments
------- ----------- ---------- -----------
1.0.0 K Hoang 14/07/2020 Initial coding/porting to support nRF52 and SAMD21/SAMD51 boards. Add SINRIC/Alexa support
1.0.1 K Hoang 16/07/2020 Add support to Ethernet W5x00 to nRF52, SAMD21/SAMD51 and SAM DUE boards
1.0.2 K Hoang 18/07/2020 Add support to Ethernet ENC28J60 to nRF52, SAMD21/SAMD51 and SAM DUE boards
1.0.3 K Hoang 18/07/2020 Add support to STM32F boards using Ethernet W5x00, ENC28J60 and LAN8742A
1.0.4 K Hoang 27/07/2020 Add support to STM32F/L/H/G/WB/MP1 and Seeeduino SAMD21/SAMD51 using
Ethernet W5x00, ENC28J60, LAN8742A and WiFiNINA. Add examples and Packages' Patches.
1.0.5 K Hoang 29/07/2020 Sync with ArduinoWebsockets v0.4.18 to fix ESP8266 SSL bug.
*****************************************************************************************************************************/
#ifndef defines_h
#define defines_h
#if ( defined(ARDUINO_SAM_DUE) || defined(__SAM3X8E__) )
#if defined(WEBSOCKETS_ETHERNET_USE_SAMDUE)
#undef WEBSOCKETS_ETHERNET_USE_SAMDUE
#endif
#define WEBSOCKETS_USE_ETHERNET true
#define WEBSOCKETS_ETHERNET_USE_SAMDUE true
#else
#error This code is intended to run only on the SAM DUE boards ! Please check your Tools->Board setting.
#endif
#if defined(WEBSOCKETS_ETHERNET_USE_SAMDUE)
// For SAM DUE
#if defined(ARDUINO_SAM_DUE)
#define BOARD_TYPE "SAM DUE"
#elif defined(__SAM3X8E__)
#define BOARD_TYPE "SAM SAM3X8E"
#else
#define BOARD_TYPE "SAM Unknown"
#endif
#endif
#ifndef BOARD_NAME
#define BOARD_NAME BOARD_TYPE
#endif
// Just select one to be true. If all is false, default is Ethernet.
// If more than one are true, the priority is USE_ETHERNET_LIB, USE_ETHERNET2_LIB, USE_ETHERNET_LARGE_LIB, USE_UIP_ETHERNET
#define USE_ETHERNET_LIB false
#define USE_ETHERNET2_LIB false
#define USE_ETHERNET_LARGE_LIB false
#define USE_UIP_ETHERNET false
#if USE_ETHERNET_LIB
// Also default to Ethernet library
#include <Ethernet.h>
#define ETHERNET_TYPE "W5x00 and Ethernet Library"
#elif USE_ETHERNET2_LIB
#include <Ethernet2.h>
#define ETHERNET_TYPE "W5x00 and Ethernet2 Library"
#elif USE_ETHERNET_LARGE_LIB
#include <EthernetLarge.h>
#define ETHERNET_TYPE "W5x00 and EthernetLarge Library"
#elif USE_UIP_ETHERNET
#include <UIPEthernet.h>
#include <utility/logging.h>
#define ETHERNET_TYPE "ENC28J60 and UIPEthernet Library"
#else
// Default to Ethernet library
#include <Ethernet.h>
#define ETHERNET_TYPE "W5x00 and Ethernet Library"
#endif
#define DEBUG_WEBSOCKETS_PORT Serial
// Debug Level from 0 to 4
#define _WEBSOCKETS_LOGLEVEL_ 3
uint8_t mac[6] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xDE, 0x01 };
// Select the IP address according to your local network
//IPAddress serverIP(192, 168, 33, 85);
IPAddress serverIP (192, 168,2, 95);
#define SDCARD_CS 4
#endif //defines_h
Gesendet: Mittwoch, 05. August 2020 um 17:04 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
Running more than 8hrs continuously and both EthernetServer and WebSocketsServer are still OK
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
You have to run the posted sample code (with the IP address modified) successfully to be sure your board / settings are OK before changing the code gradually to fix your purpose. If not OK, you have to fix your hardware / settings first. Do you have to use
or it's better to use DHCP IP
I can't help any further |
ok I should probably try out more before I write
It seems to me that the websock only continues when it has a client.
But the web page is still not displayed.
When I connect and disconnect the websock the web page will build up. So somewhere in the websock there is a loop that does not release the client while it is there. That means the websock must release after time x. Or did I do something wrong with the ethernet library ?
Translated with www.DeepL.com/Translator (free version)
Thank you for helping. I don't want to spam you with mails but i is my slow progres to understand whats going on.
Gesendet: Mittwoch, 05. August 2020 um 17:04 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
Running more than 8hrs continuously and both EthernetServer and WebSocketsServer are still OK
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
So that's the code and I have adjusted my IP that's not it and the hardware can't be it.
One thing must be clear the browser that opens the page will also be the receiver of the websocket. I want to display the logging data in a browse window. Probably it works because your clients are constantly querying the websocket and can do that ?
Gesendet: Mittwoch, 05. August 2020 um 20:10 Uhr
Von: "Khoi Hoang" <[email protected]>
An: "khoih-prog/WebSockets_Generic" <[email protected]>
Cc: "Jake" <[email protected]>, "Mention" <[email protected]>
Betreff: Re: [khoih-prog/WebSockets_Generic] Support as Http server and the webscok server on Arduino DUE (#1)
You have to run the posted sample code (with the IP address modified) successfully to be sure your board / settings are OK before changing the code gradually to fix your purpose.
If not OK, you have to fix your hardware / settings first.
Do you have to use
IPAddress serverIP(192, 168, 33, 85);
or it's better to use DHCP IP
// start the ethernet connection and the server:
// Use Static IP
//Ethernet.begin(mac, serverIP);
//Configure IP address via DHCP
Ethernet.begin(mac);
I can't help any further
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
If you specify your problem early, it'll be helpful and save time OK, if I understand correctly now, your problem is that
If so, I think I can fix the problem by modifying the WebSockets2_Generic Library. Please wait until I find out the fix and post the new release. I'm moving the issue to the correct place of WebSockets2_Generic Library as Running Http and Websocket Servers concurrently From now on, please post to the new place. |
### New in v1.0.6 1. Add ***non-blocking WebSockets Server*** feature to enable WS Server and WebServer running ***concurently***. See [***Support as Http server and the Websockets server on Arduino DUE***](khoih-prog/WebSockets_Generic#1) and [***Running Http and Websocket Servers concurrently***](#1). Thanks to bug report and persistence of [Jake](https://github.com/jakespeed1311). 2. Add non-blocking WebSockets Server and WebServer examples. 3. Add Ethernet Library Patches 4. Add Arduino SAMD Packages_Patches to fix compiler errors when using [Standard Template Library STL](https://en.wikipedia.org/wiki/Standard_Template_Library)
### New in v1.0.6 1. Add ***non-blocking WebSockets Server*** feature to enable WS Server and WebServer running ***concurently***. See [***Support as Http server and the Websockets server on Arduino DUE***](khoih-prog/WebSockets_Generic#1) and [***Running Http and Websocket Servers concurrently***](#1). Thanks to bug report and persistence of [Jake](https://github.com/jakespeed1311). 2. Add non-blocking WebSockets Server and WebServer examples. 3. Add Ethernet Library Patches 4. Add Arduino SAMD Packages_Patches to fix compiler errors when using [Standard Template Library STL](https://en.wikipedia.org/wiki/Standard_Template_Library)
### New in v1.0.6 1. Add ***non-blocking WebSockets Server*** feature to enable WS Server and WebServer running ***concurently***. See [***Support as Http server and the Websockets server on Arduino DUE***](khoih-prog/WebSockets_Generic#1) and [***Running Http and Websocket Servers concurrently***](#1). Thanks to bug report and persistence of [Jake](https://github.com/jakespeed1311). 2. Add non-blocking WebSockets Server and WebServer examples. 3. Add Ethernet Library Patches 4. Add Arduino SAMD Packages_Patches to fix compiler errors when using [Standard Template Library STL](https://en.wikipedia.org/wiki/Standard_Template_Library)
### New in v1.0.6 1. Add ***non-blocking WebSockets Server*** feature to enable WS Server and WebServer running ***concurently***. See [***Support as Http server and the Websockets server on Arduino DUE***](khoih-prog/WebSockets_Generic#1) and [***Running Http and Websocket Servers concurrently***](#1). Thanks to bug report and persistence of [Jake](https://github.com/jakespeed1311). 2. Add non-blocking WebSockets Server and WebServer examples. 3. Add Ethernet Library Patches 4. Add Arduino SAMD Packages_Patches to fix compiler errors when using [Standard Template Library STL](https://en.wikipedia.org/wiki/Standard_Template_Library)
### New in v1.0.6 1. Add ***non-blocking WebSockets Server*** feature to enable WS Server and WebServer running ***concurently***. See [***Support as Http server and the Websockets server on Arduino DUE***](khoih-prog/WebSockets_Generic#1) and [***Running Http and Websocket Servers concurrently***](#1). Thanks to bug report and persistence of [Jake](https://github.com/jakespeed1311). 2. Add non-blocking WebSockets Server and WebServer examples. 3. Add Ethernet Library Patches 4. Add Arduino SAMD Packages_Patches to fix compiler errors when using [Standard Template Library STL](https://en.wikipedia.org/wiki/Standard_Template_Library)
### New in v1.0.6 1. Add ***non-blocking WebSockets Server*** feature to enable WS Server and WebServer running ***concurently***. See [***Support as Http server and the Websockets server on Arduino DUE***](khoih-prog/WebSockets_Generic#1) and [***Running Http and Websocket Servers concurrently***](#1). Thanks to bug report and persistence of [Jake](https://github.com/jakespeed1311). 2. Add non-blocking WebSockets Server and WebServer examples. 3. Add Ethernet Library Patches 4. Add Arduino SAMD Packages_Patches to fix compiler errors when using [Standard Template Library STL](https://en.wikipedia.org/wiki/Standard_Template_Library)
The new Version v1.0.6 has been released with these new features to fix the blocking action of WebSockets Server that prevents the concurrent running of WebServer and WebSockets Server you experienced so far. New in WebSockets2_Generic v1.0.6
Please try the example SAMDUE-Ethernet_AdvancedWebServer to have feelings. Then modify it to fix your purpose. Please be noted that your bug report and persistence, resulting in the new Version v1.0.6, has been noted in Contributions-and-Thanks |
### New in v1.0.6 1. Add ***non-blocking WebSockets Server*** feature to enable WS Server and WebServer running ***concurrently***. See [***Support as Http server and the Websockets server on Arduino DUE***](khoih-prog/WebSockets_Generic#1) and [***Running Http and Websocket Servers concurrently***](#1). Thanks to bug report and persistence of [Jake](https://github.com/jakespeed1311). 2. Add non-blocking WebSockets Server and WebServer examples. 3. Add Ethernet Library Patches 4. Add Arduino SAMD Packages_Patches to fix compiler errors when using [Standard Template Library STL](https://en.wikipedia.org/wiki/Standard_Template_Library)
Hello,
Sorry i want so talk about Websockets Server Examples.
i am want wo work with the library with Arduino DUE and PlatformIO last version from Today.
My projectis based on AJAX now i want to switch some functions to Websockets.
I have an working Webserver with html files on SDCard, and i want to bring these Library as websock server on the DUE. Normal Ethernet shiled with the WizNet 5100 controller and SDslot.
Is this posible ?
The PC ist only the client and the DUE is the Server for http and Websock paralel.
The Due sends the data to the Client Browser on the pc.
I havent seen an Examble as Server also not found realy the DUE as suppotert, well only the list for the toolchain.
tanks
Jake
The text was updated successfully, but these errors were encountered: