Skip to content
/ iRift Public

Ableton Live 11 control surface for iRig Keys I/O keyboards

License

Notifications You must be signed in to change notification settings

kmontag/iRift

Repository files navigation

iRift

This is an Ableton Live 11 control surface script for iRig Keys I/O keyboards. It offers a lot more functionality than Live's built-in iRig script.

It's tested on the 49-key model, but should work on the 25-key model as well - testers welcome.

Installation

  • Download or clone this repository and place it under Remote Scripts in your Live User Library. (If you don't know your User Library location, you can find it under Library in Live's settings dialog.)
  • Start or restart Live.
  • In the Live settings dialog under Link/Tempo/MIDI, choose iRift as one of your control surfaces.
  • Make sure your iRig device is plugged in, and select the appropriate ports for the control surface input/output.

Hardware setup

Load the F02 factory preset (normally used for Logic Pro X/GarageBand integration) onto the iRig. The smooth encoders should now be mapped to Live's device parameters, and the DATA encoder should scroll the selected track.

To get functionality from the pads, start from F02 and change the pad channel (EDIT -> PRE -> PAD -> CH) to something from the table below. You can save your changes to a user preset to allow for quick recall. The available pad behaviors are:

Pad channel Pad behavior
GLO (unmodified F02 preset) Notes/no special functionality
2 Transport
3 Drum pads
4 Launch clips
5 Select tracks
6 Mute tracks
7 Solo tracks
8 Arm tracks
9 Stop track clips
10 Set DATA encoder behavior (also acessible via ⏩ on the I/O 49)

The most natural setup is to save presets for pad channels 2-9 as U01-U08, respectively - then you can quickly change pad behavior by pressing PRESET followed by the corresponding pad. But you can of course omit any of these presets or organize them differently, depending on your workflow.

Note: if your global MIDI channel is set to something other than 1, you'll need to specify this in your configuration, and (if necessary) specify an alternate channel for the conflicting pad behavior.

Usage

DATA encoder

At startup, the data encoder scrolls the selected track. The behavior can be changed by loading a preset with pad channel 10, and pressing a pad:

Pad DATA encoder function DATA encoder push function
1 (default) Selected track Arm selected track
2 Track session ring ("red box")
3 Scene session ring Play highlighted scene
4 Controlled send
5 Selected device Lock to selected device
6 Device bank Lock to selected device
7 Drum rack position
8 (unchanged)

If you have an I/O 49, you can also quickly set the DATA encoder behavior by pressing ⏩ (i.e. ALT + STOP) followed by one of the pads.

Pads

Navigate through your configured user presets to change the pad function.

Transport control via pads

When the pad channel is set to 2, the pads are mapped to transport controls:

Pad Function
1 Play
2 Stop
3 Arrangement Record
4 Session Record
5 Metronome
6 Tap Tempo
7 Select new clip slot for current track
8 Stop All Clips

Smooth encoders and physical transport buttons

By default, the smooth encoders control the parameters of the current device. You can change the behavior using the physical transport buttons on the iRig.

The iRig's transport buttons have hardcoded LED/MIDI behavior and can't receive feedback from Live, so they aren't a good fit for controlling Live's transport (as they can easily get out of sync). Instead, the LEDs indicate the current encoder behavior:

Play LED 🟢 Record LED 🔴 Encoder 1-8 function
off off Device parameters
ON off Track volume
ON ON Track panning
off ON Track sends (DATA encoder can be used to select the controlled send)

You'll probably want to mess around with the transport buttons a bit, to get a sense for how to navigate through these states with the onboard behavior:

  • STOP always turns both LEDs off.
  • PLAY turns on the Play LED unless the Record LED is already turned on, in which case it does nothing.
  • RECORD turns on the Record LED unless the Play LED is already turned on, in which case it toggles the Record LED on/off state.

Configuration

You can configure some aspects of the control surface behavior by creating a file called user.py in this directory, and adding something like the following:

# user.py
from .configuration import Configuration

configuration = Configuration(
    initial_data_encoder_mode="session_ring_scenes",
    # ...
)

See configuration.py for the full list of options.

About

Ableton Live 11 control surface for iRig Keys I/O keyboards

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published