Port to AVR attiny13 from a previous project based on PIC 12C508
Install avr-gcc on your system, then
git clone https://github.com/lhondareyte/AVR-MIDI-panic
cd AVR-MIDI-panic/src
make
make load
make wfuse
The load (and wfuse) target assume that you have a TL866 programmer with miniproinstalled
The panic device act as a passthrough device : all data entering the PB2 pin are replicated on the PB3 output. If you don't need this mode, comment out the following line in config.mk
CFLAGS += -D __PASS_THROUGH__
Or you can connect PB2 to VCC.
- MIT License