Note: HMM-Flagger is an HMM-based version of Flagger, offering faster execution and higher prediction accuracy. It replaces the previous version, Flagger v0.4.0, and is recommended for all users from now on.
HMM-Flagger is a read-mapping-based tool that can detect different types of mis-assemblies in a dual or diploid genome assembly. HMM-Flagger recieves the read alignments to a genome assembly, uses Hidden Markov Model to detect anomalies in the read coverage along the assembly and finally partitions the assembly into four classes; erroneous, falsely duplicated, haploid (structurally correct) and collapsed.
Performing these three steps took less than 15 minutes in our internal tests for a PacBio HiFi bam file with 40x coverage. The speed of step 2 is highly dependent on the speed and bandwidth of the storage disk.
# Go to the working directory
# Put fasta, bam and bam index files in this directory
cd ${WORKING_DIR}
# Create fasta index assuming that file is not gz-compressed
samtools faidx ${FASTA_FILE}
# Create a bed file covering whole genome
cat ${FASTA_FILE}.fai | \
awk '{print $1"\t0\t"$2}' > whole_genome.bed
# Put path to the whole-genome bed file in a json file
echo "{" > annotations_path.json
echo \"whole_genome\" : \"${PWD}/whole_genome.bed\" >> annotations_path.json
echo "}" >> annotations_path.json
# Convert bam to cov.gz with bam2cov program
docker run -it --rm -v${WORKING_DIR}:${WORKING_DIR} mobinasri/flagger:v1.0.0 \
bam2cov --bam ${WORKING_DIR}/${BAM_FILE} \
--output ${WORKING_DIR}/coverage_file.cov.gz \
--annotationJson ${WORKING_DIR}/annotations_path.json \
--threads 16 \
--baselineAnnotation whole_genome
mkdir -p ${WORKING_DIR}/hmm_flagger_outputs
docker run -it --rm -v${WORKING_DIR}:${WORKING_DIR} mobinasri/flagger:v1.0.0 \
hmm_flagger \
--input ${WORKING_DIR}/coverage_file.cov.gz \
--outputDir ${WORKING_DIR}/hmm_flagger_outputs \
--alphaTsv /home/programs/config/alpha_optimum_trunc_exp_gaussian_w_4000_n_50.tsv \
--labelNames Err,Dup,Hap,Col \
--threads 16
The bed file contating HMM-Flagger predictions will be located in hmm_flagger_outputs/final_flagger_prediction.bed. A summary tsv file (counts will be based on windows rather than bases) will be located in hmm_flagger_outputs/prediction_summary_final.tsv
For example this table shows that 95.99% of the assembly is flagged as correctly assembled:
cat hmm_flagger_outputs/prediction_summary_final.tsv | grep base_level | grep whole_genome | grep percentage
PREDICTION base_level percentage annotation whole_genome ALL_SIZES ALL_LABELS 1.24 1.37 95.99 1.40 0.00
It has been observed that peri/centromeric satellite regions are prone to have coverage biases (in PacBio HiFi and ONT data). Users can add satellite repeat arrays as separate annotations to the input json for the bam2cov program (with enabling --runBiasDetection). bam2cov will detect if there exist coverage biases in any annotation provided in the json file and add the neccessary information to the coverage file. It will help HMM-Flagger to predict the labels more accurately. It is recommended to provide each satellite in a separate bed file for example putting HSat1A and Hsat2 in separate files.
If user has a set of unalinged reads it is easier to run the pipeline (read mapping + HMM-Flagger) using the WDLs described below. Using WDLs it is also easier to incorporate coverage biases that may exist in the satellite regions. Even if de-novo annotations are not available it is possible to pass annotations in the coordinates of a reference (for example T2T-CHM13) to the workflow. Given the reference fasta file it can project annotation coordinates from reference to assembly and augment coverage files with the projected annotations.
A WDL file can be run locally using Cromwell, which is an open-source Workflow Management System for bioinformatics. The latest releases of Cromwell are available here and the documentation is available here.
It is recommended to run the whole pipeline using hmm_flagger_end_to_end_with_mapping.wdl.
Here is a list of input parameters for hmm_flagger_end_to_end_with_mapping.wdl (The parameters marked as "(Mandatory)" are mandatory to be defined in the input json):
| Parameter | Description | Type | Default |
|---|---|---|---|
| sampleName | Sample name; for example 'HG002' | String | No Default (Mandatory) |
| suffixForFlagger | Suffix string that contains information about this analysis; for example 'hifi_winnowmap_flagger_for_hprc' | String | No Default (Mandatory) |
| suffixForMapping | Suffix string that contains information about this alignment. It will be appended to the name of the final alignment file. For example 'hifi_winnowmap_v2.03_hprc_y2' | String | No Default (Mandatory) |
| hap1AssemblyFasta | Path to uncompressed or gzip-compressed fasta file of the 1st haplotype. | File | No Default (Mandatory) |
| hap2AssemblyFasta | Path to uncompressed or gzip-compressed fasta file of the 2nd haplotype. | File | No Default (Mandatory) |
| readFiles | An array of read files. Their format can be either fastq, fq, fastq.gz, fq.gz, bam or cram. For cram format referenceFastaForReadExtraction should also be passed. | Array[File] | No Default (Mandatory) |
| presetForMapping | Paremeter preset should be selected based on aligner and sequencing platform. Common presets are map-pb/map-hifi/map-ont for minimap2, map-pb/map-ont for winnowmap and hifi-haploid/hifi-haploid-complete/hifi-diploid/ont-haploid-complete for veritymap | String | No Default (Mandatory) |
| alphaTsv | The dependency factors for adjusting emission parameters with previous emission. This parameter is a tsv file with 4 rows and 4 columns with no header line. All numbers should be between 0 and 1. | File | No Default (Mandatory) |
| aligner | Name of the aligner. It can be either minimap2, winnowmap or veritymap. | String | winnowmap |
| kmerSize | The kmer size for using minimap2 or winnowmap. With winnowmap kmer size should be 15 and with minimap2 kmer size should be 17 and 19 for using the presets map-ont and map-hifi/map-pb respectively. | Int | 15 |
| alignerOptions | Aligner options. It can be something like '--eqx --cs -Y -L -y' for minimap2/winnowmap. Note that if assembly is diploid and aligner is either minimap2 or winnowmap '-I8g' is necessary. If the reads contain modification tags and these tags are supposed to be present in the final alignment file, alignerOptions should contain '-y' and the aligner should be either minimap2 or winnowmap. If running secphase is enabled it is recommended to add '-p0.5' to alignerOptions; it will keep more secondary alignments so secphase will have more candidates per read. For veritymap '--careful' can be used but not recommended for whole-genome assembly since it increases the runtime dramatically. | String | --eqx -Y -L -y |
| readExtractionOptions | The options to be used while converting bam to fastq with samtools fastq. If the reads contain epigentic modification tags it is necessary to use '-TMm,Ml,MM,ML' | String | -TMm,Ml,MM,ML |
| referenceFastaForReadExtraction | If reads are in CRAM format then the related reference should be passed to this parameter for read extraction. | File | No Default (Optional) |
| enableAddingMDTag | If true it will call samtools calmd to add MD tags to the final bam file. | Boolean | true |
| splitNumber | The number of chunks which the input reads should be equally split into. Note that enableSplittingReadsEqually should be set to true if user wants to split reads into equally sized chunks. | Int | 16 |
| enableSplittingReadsEqually | If true it will merge all reads together and then split them into multiple chunks of roughly equal size. Each chunk will then be aligned via a separate task. This feature is useful for running alignment on cloud/slurm systems where there are multiple nodes available with enough computing power and having alignments tasks distributed among small nodes is more efficient or cheaper than running a single alignment task in a large node. If the whole workflow is being on a single node it is not recommened to use this feature since merging and splitting reads takes its own time. | Boolean | false |
| minReadLengthForMapping | If it is greater than zero, a task will be executed for filtering reads shorter than this value before alignment. | Int | 0 |
| alignerThreadCount | The number of threads for mapping in each alignment task | Int | 16 |
| alignerMemSize | The size of the memory in Gb for mapping in each alignment task | Int | 48 |
| alignerDockerImage | The mapping docker image | String | mobinasri/long_read_aligner:v0.4.0 |
| correctBamOptions | Options for the correct_bam program that can filters short/highly divergent alignments | String | --primaryOnly --minReadLen 5000 --minAlignment 5000 --maxDiv 0.1 |
| annotationsBedArray | (Optional) A list of annotations to be used for augmenting coverage files and stratifying final HMM-Flagger results. These annotations should be in the coordinates of the assembly under evaluation. | Array[File] | No Default (Optional) |
| annotationsBedArrayToBeProjected | (Optional) list of annotations to be used for augmenting coverage files and stratifying final HMM-Flagger results. These annotations are not in the coordinates of the assembly and they need to be projected from the given projection reference to the assembly coordinates. | Array[File] | No Default (Optional) |
| biasAnnotationsBedArray | (Optional) A list of bed files similar to annotationsBedArray but these annotations potentially have read coverage biases like HSat2. (in the assembly coordinates) | Array[File] | No Default (Optional) |
| biasAnnotationsBedArrayToBeProjected | (Optional) A list of bed files similar to annotationsBedArrayToBeProjected but these annotations potentially have read coverage biases like HSat2. (in the reference coordinates) | Array[File] | No Default (Optional) |
| sexBed | A bed file containing regions assigned to X/Y chromosomes. (in asm coordinates) | File | No Default (Optional) |
| sexBedToBeProjected | A bed file containing regions assigned to X/Y chromosomes. (in ref coordinates) | File | No Default (Optional) |
| SDBed | A bed file containing Segmental Duplications. (in asm coordinates) | File | No Default (Optional) |
| SDBedToBeProjected | A bed file containing Segmental Duplications. (in ref coordinates) | File | No Default (Optional) |
| cntrBed | A bed file containing peri/centromeric satellites (ASat, HSat, bSat, gSat) without 'ct' blocks. (in asm coordinates) | File | No Default (Optional) |
| cntrBedToBeProjected | A bed file containing peri/centromeric satellites (ASat, HSat, bSat, gSat) without 'ct' blocks. (in ref coordinates) | File | No Default (Optional) |
| cntrCtBed | A bed file containing centromere transition 'ct' blocks. (in asm coordinates) | File | No Default (Optional) |
| cntrCtBedToBeProjected | A bed file containing centromere transition 'ct' blocks. (in ref coordinates) | File | No Default (Optional) |
| projectionReferenceFasta | If any of the parameters ending with 'ToBeProjected' is not empty a reference fasta should be passed for performing projections | File | No Default (Optional) |
| enableRunningSecphase | If true it will run secphase in the marker mode using the wdl parameters starting with 'secphase' otherwise skip it. | Boolean | false |
| secphaseDockerImage | Docker image for running Secphase | String | mobinasri/secphase:v0.4.3 |
| secphaseOptions | String containing secphase options (can be either --hifi or --ont). | String | --hifi |
| secphaseVersion | Secphase version. | String | v0.4.3 |
| includeContigListText | Create coverage file and run HMM-Flagger only on these contigs (listed in a text file with one contig name per line) | File | All contigs |
| binSizeArrayTsv | A tsv file (tab-delimited) that contains bin arrays for stratifying results by event size. Bin intervals can have overlap. It should contain three columns. 1st column is the closed start of the bin and the 2nd column is the open end. The 3rd column has a name for each bin | File | all sizes in a single bin named ALL_SIZES |
| chunkLen | The length of chunks for running HMM-Flagger. Each chunk will be processed in a separate thread before merging results together | Int | 20000000 |
| windowLen | The length of windows for running HMM-Flagger. The coverage values will be averaged over the bases in each window and then the average value will be considered as an emission. | Int | 4000 |
| labelNames | The names of the labels/states for reporting in the final summary tsv files | String | 'Err,Dup,Hap,Col' |
| trackName | The track name in the final BED file | hmm_flagger_v1.0.0 | |
| numberOfIterationsForFlagger | Number of EM iterations for estimating HMM parameters | Int | 100 |
| convergenceToleranceForFlagger | Convergence tolerance. The EM iteration will stop once the difference between all model parameter values in two consecutive iterations is less than this value. | Flaot | 0.001 |
| maxHighMapqRatio | Maximum ratio of high mapq coverage for duplicated component | Float | 0.25 |
| flaggerMoreOptions | More options for HMM-Flagger provided in a single string | String | No Default (Optional) |
| modelType | Model type can be either 'gaussian', 'negative_binomial', or 'trunc_exp_gaussian' | String | 'trunc_exp_gaussian' |
| flaggerMinimumBlockLenArray | Array of minimum lengths for converting short non-Hap blocks into Hap blocks. Given numbers should be related to the states Err, Dup and Col respectively. | Array[Int] | [0,0,0] |
| flaggerThreadCount | Number of threads for running HMM-Flagger | Int | 16 |
| flaggerDockerImage | Docker image for HMM-Flagger | String | mobinasri/flagger:v1.0.0 |
| enableOutputtingBigWig | If true it will make bigwig files from cov files and output them. bigwig files can be easily imported into IGV sessions | Boolean | true |
| enableOutputtingBam | If true it will make bigwig files from cov files and output them. bigwig files can be easily imported into IGV sessions | Boolean | false |
| truthBedForMisassemblies | A BED file containing the coordinates and labels of the truth misassemblies. It can be useful when the misassemblies are simulated (e.g. with Falsifier) | Boolean | No Default (Optional) |
A set of annotations files in the coordinates of chm13v2.0 are prepared beforehand and they can be used as inputs to the workflow. These bed files are useful when there is no denovo annotation for the assemblies and we like to project annotations from chm13v2.0 to the assembly coordinates for two main purposes:
- Detecting regions with coverage biases: Satellite repeat arrays might have coverage biases so before running HMM-Flagger it is best to pass those annotations to bam2cov program (with
--runBiasDetectionenabled). bam2cov will inspect those regions and put this information inside the created coverage file if any coverage-biased region was detected. - Stratifying final results with the projected annotations.
Using these bed files are optional and the related parameters can be left undefined (being absent from the input json). In this case the workflow should still work properly. However users should be aware that in this case potential coverage biases in HSat arrays may mislead HMM-Flagger.
All files with git and s3 urls are publicly accessible so if you are running the WDL on Terra/AnVIL platforms you can use the same urls. They are also available in the directories misc/annotations and misc/biased_regions of this repository for those who want to run locally.
hmm_flagger_end_to_end_with_mapping.wdl is running two major workflows; long_read_aligner_scattered.wdl and hmm_flagger_end_to_end.wdl. The first one runs read mapping and the second one runs the end-to-end flagger pipeline (including annotation projection, bias detection, secphase and flagger).
Users can run each of them separately. For example if there is a read alignment file available beforehand users can run only hmm_flagger_end_to_end.wdl. The parameters for each of these workflows is a subset of the parameters listed above for hmm_flagger_end_to_end_with_mapping.wdl therefore this table can still be used as a reference for either long_read_aligner_scattered.wdl or hmm_flagger_end_to_end.wdl.
Below are the main commands for running flagger_end_to_end_with_mapping.wdl locally using Cromwell.
wget https://github.com/broadinstitute/cromwell/releases/download/85/cromwell-85.jar
wget https://github.com/broadinstitute/cromwell/releases/download/85/womtool-85.jar
# Get version 1.0.0 of HMM-Flagger
wget https://github.com/mobinasri/flagger/archive/refs/tags/v1.0.0.zip
unzip v1.0.0.zip
# make a directory for saving outputs and json files
mkdir workdir
cd workdir
java -jar ../womtool-85.jar inputs ../flagger-1.0.0/wdls/workflows/hmm_flagger_end_to_end_with_mapping.wdl > inputs.json
After modifying inputs.json, setting mandatory parameters: sampleName, suffixForFlagger, suffixForMapping, hap1AssemblyFasta, hap2AssemblyFasta, readFiles, presetForMapping and removing unspecified parameters (they will be set to default values), users can run the command below:
## run flagger workflow
java -jar ../cromwell-85.jar run ../flagger-1.0.0/wdls/workflows/hmm_flagger_end_to_end_with_mapping.wdl -i inputs.json -m outputs.json
The paths to output files will be saved in outputs.json. The instructions for running any other WDL is similar.
Instructions for running WDLs on Slurm are provided here , which includes some test data sets for each of the workflows:
All WDLs are uploaded to Dockstore for easier import into platforms like Terra or AnVIL.
- Dockstore link for long_read_aligner_scattered.wdl
- Dockstore link for hmm_flagger_end_to_end.wdl
- Dockstore link for hmm_flagger_end_to_end_with_mapping.wdl
| Component | Status | Color | Description |
|---|---|---|---|
| Err | Erroneous | Red | This block has low read coverage. If it is located in the middle of a contig it could be either a misjoin or a region that needs polishing |
| Dup | Duplicated | Orange | This block is potentially a false duplication of another block. It should mainly include low-MAPQ alignments with half of the expected coverage. Probably one of the copies has to be polished or removed to fix this issue |
| Hap | Haploid | Green | This block is correctly assembled and has the expected read coverage |
| Col | Collapsed | Purple | Two or more highly similar haplotypes are collapsed into this block |
Each of these components has their own color when they are shown in the IGV or the UCSC Genome Browser.
Liao, Wen-Wei, Mobin Asri, Jana Ebler, Daniel Doerr, Marina Haukness, Glenn Hickey, Shuangjia Lu et al. "A draft human pangenome reference." Nature 617, no. 7960 (2023): 312-324.